Minn Kota RIPTIDE TERROVA 55 BT - GPS - 55 Lbs - 12V - 137cm

The Minn Kota Riptide Terrova is a bow-mount trolling motor designed specifically for saltwater use. It features Bluetooth (BT) technology and a GPS system, providing advanced positioning and boat control features such as Spot-Lock hold and autopilot navigation.

This Minn Kota Riptide Terrova motor delivers 55 pounds (lbs) of thrust and operates on 12 volts direct current (VDC).

The shaft length of this Minn Kota Riptide Terrova model is 137 centimetres (cm).

Yes, the Minn Kota Riptide Terrova motor is specifically designed and treated for saltwater use, providing corrosion protection.

The integrated GPS system, paired with Bluetooth (BT) connectivity, enables advanced features such as:

Spot-Lock: Automatic boat position holding.Advanced AutoPilot: Automatic navigation on a given heading.Record a Track: Recording and re-navigating a route.Cruise Control: Maintaining a constant speed.These functions can be controlled via the i-Pilot Bluetooth remote control or a compatible smartphone app.

The engine is fitted with a battery status indicator labeled « Press to Test ». Simply press the dedicated button to display the remaining charge level of your battery.

The serial number of your Minn Kota Riptide Terrova motor is located inside the mounting bracket, beneath the motor’s mounting points.

Yes, this Riptide Terrova 55 BT - GPS model is supplied with the i-Pilot Bluetooth remote, which allows control of all GPS and navigation functions of the engine.

The user manual for this engine describes the procedure for installing an external transducer. The product does not specify the presence of an integrated depth sounder transducer. If you wish to use a fishfinder, an external transducer must be installed.

The Riptide Terrova motor is designed for easy stowage and deployment. It features a mechanism to lift it out of the water and secure it in the stowed position, or to deploy it quickly for fishing. Keep fingers clear of the hinge points, pivot areas, and all moving parts during these operations.

Your Riptide Terrova motor can be installed directly on the bow of your boat. It can also be paired with a Minn Kota quick-release bracket (sold separately) to simplify mounting and removal. The user manual provides detailed instructions for direct installation, including the list of parts and required tools.

It is crucial to read the user manual carefully before any installation or use. Here are some important warnings:

Never run the engine out of the water to avoid injuries from the rotating propeller.
Disconnect the engine from the power source when not in use or out of the water.
Ensure that power cables are not bent, subject to chafing, or have damaged insulation.
Avoid submerging the engine completely, as water could enter the lower unit and cause damage not covered by the warranty.
Keep fingers away from hinges and moving parts when stowing or deploying the engine.
Use only accessories approved by Johnson Outdoors.

To power this 12 V DC motor, use a 12 V deep-cycle battery. The owner’s manual provides detailed guidance on battery selection and additional wiring considerations for your vessel.

To adjust the motor depth, unlock the depth adjustment collar on the shaft. Once unlocked, slide the motor up or down to reach the desired depth, then tighten the collar to secure it in place. Ensure the propeller is sufficiently submerged without touching the bottom.

Yes, the Minn Kota Riptide Terrova motor can be paired with a Minn Kota quick-release bracket. This allows for easier installation and removal of the motor from your boat. If you use such a bracket, you must follow the installation instructions provided with the bracket itself.

Yes, it is recommended to use only accessories approved by Johnson Outdoors with your Minn Kota motor. Using non-approved accessories may cause damage or unexpected operation of the motor, and such damage would not be covered by the warranty. This model is compatible with i-Pilot Bluetooth control systems.

Yes, the user manual mentions routing the cable for the i-Pilot Link, indicating that this motor is compatible with the i-Pilot Link system. This system enables advanced integration with Humminbird fishfinders for even more precise navigation control.

Yes, thanks to its Bluetooth (BT) connectivity, the Riptide Terrova 55 BT engine can be controlled via a compatible mobile app on a smartphone. This app provides access to advanced GPS features such as Spot-Lock, AutoPilot, and navigation.

The Minn Kota Riptide Terrova motor has two types of warranty:

A two-year limited warranty on the entire product, covering material and manufacturing defects.A lifetime limited warranty on the composite shaft, covering material and manufacturing defects for the lifetime of the original retail buyer.These warranties are provided by Johnson Outdoors Marine Electronics, Inc. to the original retail buyer and are not transferable.