Colliers JL Audio PS-SWMCP, tube 2,875 po - 010-13876-00 - vue 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

JL Audio

010-13876-00

JL Audio PS-SWMCP Collars, 2.875 in Tube

PS-SWMCP-B-2.875 kit for 2.875-inch (73.025 mm) round tube and PS650-VeX housings according to the datasheet. Speakers sold separately.

Retail priceBenefit from the professional rate

166,66€

166,66€ ~~166,66€~~

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for Oman. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Color	Black
Compatible models	JL Audio PS650-VeX
Kit contents	Four Axia Alloys hose clamps, six M6 x 16 mm screws, two preinstalled M4 x 4 mm adjustment screws, four M6 nylon-insert locknuts, two clamp receivers, one red Loctite thread locker, four M6 flat washers, four M6 x 45 mm screws, and one plastic strip. Mounting bases, silicone, and hardware marked with an asterisk are supplied with the speakers, not with this kit.
Product type	Speaker mounting bracket
Model number	PS-SWMCP-B-2.875
Mounting Bar Diameter In	2.875
Mounting Bar Diameter Mm	73.025
Thread Locking Compound Included	Yes

Detailed description

The PS-SWMCP-B-2.875 mounts are designed for a 2.875-inch (73.025 mm) round tube. The common datasheet covers JL Audio PS650-VeX enclosures and PS-SWMCP mounts on round tubes. It does not confirm compatibility with ETXv3 nor equivalence with all M6-VeX models.

Contents and Installation

Four Axia Alloys strap clamps, six M6 x 16 mm screws, two preinstalled M4 x 4 mm adjustment screws, four M6 nylon-insert locknuts, two clamp receivers, red Loctite thread locker, four M6 flat washers, four M6 x 45 mm screws, and one plastic strip. Mounting bases, silicone, and hardware marked with an asterisk are supplied with the speakers, not with this kit.

Protect the tube with the plastic strip during positioning, support the enclosure, adjust its orientation, and follow the thread locker and tightening sequence. Rotating the speaker and its grille within the enclosure is a separate operation; no additional angular range is added.

Documentation

Type	Nom
	EN - Instructions d'installation et garantie limitée JL Audio - Colliers pivotants JL Audio VeX, barre 2,875 po

Expert opinion

« Skysat Advice: compatibility and installation »

Measure the tube and confirm the enclosure model before ordering. Do not confuse the clamp kit with the parts supplied with the enclosure. Use red Loctite at the prescribed steps and support the enclosure during assembly. The manual does not provide a torque value for this kit; do not reuse a value from another family.

Payment and security

Your payment information and data are processed securely.

JL Audio PS-SWMCP Collars, 2.875 in Tube

166,66€

166,66€ ~~166,66€~~

Frequently Asked Questions

Need help? Contact us

What are the JL Audio VeX swivel clamps used for?

The PS-SWMCP mounts are used to install JL Audio PS650-VeX enclosures on a round tube. The speakers are sold separately; the manual does not confirm compatibility with ETXv3 or equivalence with all M6-VeX speakers.

What is the tiller diameter compatible with these swivel clamps?

This reference is intended for a round tube of 2.875 inches, i.e. 73.025 mm. Measure the tube before ordering; this diameter is not an overall dimension.

What equipment is included with the JL Audio VeX swivel clamps?

Four Axia Alloys hose clamps, six M6 x 16 mm screws, two pre-installed M4 x 4 mm adjustment screws, four M6 nylon-insert locknuts, two clamp receivers, one red Loctite thread locker, four M6 flat washers, four M6 x 45 mm screws, and one plastic strip. Mounting bases, silicone, and hardware marked with an asterisk are supplied with the speakers, not with this kit.

Is Loctite provided with the swivel clamps?

The red Loctite is supplied. Follow the instructions in the manual for the relevant screws, support the housing, and perform the final tightening after alignment.

Is the silicone adhesive included for the logo cap?

The manual specifies the mounting bases, sealant, and enclosure screws/washers with an asterisk: these items are supplied with the enclosure, not with the clamps.

What is the brand of these swivel clamps?

This kit is a JL Audio product.

What is the model number of these swivel clamps?

The model for this reference is PS-SWMCP-B-2.875. The PS-SWMCP-B-2.000 illustrates the common manual but is not this size.

How to install JL Audio VeX swivel clamps on a round bar?

Follow the complete sequence in the manual: protected positioning of clamps, assembly of the receivers, support of the housing, orientation, thread-locking and final tightening. Do not substitute a procedure ETXv3.

Is Loctite required when installing these clamps?

The red Loctite is supplied. Follow the instructions in the manual for the relevant screws, support the housing, and perform the final tightening after alignment.

How to protect the tiller from scratches during the installation of clamps?

The plastic strip protects the tube during clamp positioning. Remove it after installation as per the manual.

Can the speaker angle be adjusted after the clamps are installed?

The manual describes the orientation of the housing and its locking. Rotation of the enclosure and its grille within the housing is a separate operation. No numerical angular amplitude is published here.

Are the installation instructions valid for all PS-SWMCP swivel mount models?

The manual covers PS-SWMCP mounts for round tubes for PS650-VeX enclosures. Each size must match the measured tube; this does not prove interchangeability between enclosure families.