Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Humminbird

XPLORE10-XDTP

XPLORE 10 Touchscreen Unit XD-Thru-Hull Plastic + Temp Sensor

The Humminbird XPLORE 10 touchscreen display provides an intuitive user interface for navigation and sonar detection. Powered by 12 VDC, it includes NMEA 2000 and Ethernet connectivity for enhanced versatility. Installation is flexible, with bracket or overhead mounting options.

Includes a 2 m power cable, bracket mounting kit, and a plastic through-hull transducer with temperature sensor.

Retail priceBenefit from the professional rate

2.224,17€

Shipping calculated at checkout.

Import duties and taxes are payable by you on delivery.

Prices shown excluding VAT for Oman. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Fishing type

Sea, Lake, River

Detailed description

The Humminbird XPLORE 10 Touchscreen Unit is a control display designed for navigation and sonar data. This model integrates with your boat’s system, providing an interface for managing essential marine information.

Flexible and Secure Installation

The XPLORE 10 unit ships with a bracket mount for versatile installation. The installation guide details traditional bracket mounting or overhead options, allowing adaptation to different helm configurations. For mounting, drill four 4 mm mounting holes and one 31.75 mm (1 1/4") cable pass-through hole located 50 to 100 mm (2" to 4") behind the chosen location. Use marine-grade silicone sealant to seal mounting holes and protect the unit from water ingress. The design allows adjustment of the unit’s viewing angle after installation, secured with manual strap-button tightening.

Power Supply and Connectivity

The XPLORE 10 requires a 12 VDC power supply. A 5A slow-blow fuse or equivalent MDL fuse is mandatory to protect the unit from overvoltage or overcurrent. The included power cable is 2 meters (6 feet) long and can be shortened or extended using multistrand copper wire. For extensions of 1 to 12 feet, use 12 AWG wire; for 12 to 24 feet, use 10 AWG wire. Connections can be made either to the boat’s fuse panel or directly to the battery. For reduced interference with other marine electronics, a dedicated power source is recommended.

The XPLORE 10 features ports for optional accessory connections, Ethernet cables, and an NMEA 2000® port. Route cables away from VHF antenna or tachometer cables to minimize interference risks. Avoid routing cables in areas where connectors may be submerged, and apply dielectric grease to connectors if exposed to spray.

Initial Setup

On first power-up, the XPLORE 10 touchscreen guides the user through a setup assistant to configure language, measurement units, time, and date. After initial setup, verify GPS status, which should display “Enhanced Fix” or “3D Fix” with latitude/longitude coordinates. Connected accessories are listed in system information to confirm detection and proper operation. A final sonar test completes transducer installation, readying the unit for on-water use.

Documentation

Type	Nom
	Humminbird — guide d'installation tete de commande XPLORE (FR/EN)

Expert opinion

« Installation and system integration of the Humminbird XPLORE 10 display »

Installing a combined unit such as the Humminbird XPLORE 10 requires careful attention to detail to ensure reliability and minimize interference. The choice of mounting location is critical: a stable and protected surface is essential to absorb shocks and vibrations at sea while ensuring optimal visibility and easy access for cable connections. The flexibility of bracket or overhead mounting is an asset, allowing adaptation to various console types.

Electrically, connection to a 12 VDC source with a 5A slow-blow fuse is non-negotiable for device protection. We recommend always checking the wire gauge for extensions, particularly over long distances, to avoid voltage drops. For boats equipped with electric trolling motors, maintaining a separate power supply for the combined unit is sound engineering practice that significantly reduces the risk of electromagnetic interference on sonar and GPS readings.

The XPLORE 10’s ability to integrate via NMEA 2000 and Ethernet positions it as a central element in a marine electronic network. This enables data sharing with other instruments, a fundamental aspect of modern navigation. Careful management of cable routing, away from noise sources such as VHF antennas or tachometers, is essential to maintain signal integrity. While the document focuses on the installation of the control unit, the mention of the plastic through-hull transducer with temperature in the product name indicates a complete solution for underwater detection, providing a solid foundation for fishing and navigation.

Payment and security

Your payment information and data are processed securely.

XPLORE 10 Touchscreen Unit XD-Thru-Hull Plastic + Temp Sensor

2.224,17€

Frequently Asked Questions

Need help? Contact us

How to install the XPLORE 10 touchscreen display on my boat?

The XPLORE 10 display is typically installed using the supplied bracket mount. Main steps:

Location planning: Choose a stable, protected surface with good visibility and cable access. Ensure enough space for unit tilt.Drilling: Mark and drill four 4 mm (5/32") mounting holes for the bracket. Also mark and drill a 31.75 mm (1 1/4") cable pass-through hole located 50 to 100 mm (2" to 4") behind the bracket position.Bracket mounting: Apply marine-grade silicone sealant into the mounting holes before securing the bracket with supplied screws and washers. Hand-tighten screws only.Unit installation: Insert the display into the bracket and hand-tighten the bracket buttons to secure it. Viewing angle can be adjusted after installation.The detailed installation manual covers both traditional and overhead mounting methods.

What power supply is required for the XPLORE 10 display and what type of fuse should I use?

The XPLORE 10 display unit requires a 12 VDC power supply.

For device protection, it is mandatory to use a 5A slow-blow fuse or its MDL equivalent. This fuse must be installed on the power cable, whether you connect the display unit to your boat’s fuse panel or directly to the battery.

The included power cable is 2 m (6 ft) long. If you need to extend the cable, use a multistrand copper wire of the appropriate gauge:

From 1 to 6 ft (0.3 to 1.8 m): 12 AWG wire
From 6 to 12 ft (1.8 to 3.6 m): 12 AWG wire
From 12 to 24 ft (3.6 to 7.3 m): 10 AWG wire
Always ensure the display unit is connected to a 12 VDC power source, not to 24 V or 36 V systems.

Are there any precautions to take when routing cables for the XPLORE 10 combined unit?

Yes, several precautions are recommended when routing cables for the XPLORE 10 display to ensure optimal performance and avoid interference or damage:

Avoid immersion: Do not run cables in areas where connectors could be submerged or flooded. Corrosion protection: In splash-prone areas, applying dielectric grease inside connectors can help prevent corrosion. Distance from interference sources: Route cables as far as possible from VHF radio antenna cables or tachometer cables to reduce interference risks. Cable slack: Leave sufficient cable slack to allow the display to pivot through its full tilt range and to ease connection or disconnection. Use nylon cable ties to secure cables and create a clean assembly. Storing excess cable: If you have excess cable, form a single loop and then coil the cable from that point. This method can help reduce electronic interference.

Is the XPLORE 10 display unit compatible with NMEA 2000 networks?

Yes, the XPLORE 10 touchscreen unit is equipped with an optional NMEA 2000® port. This allows it to connect to an existing NMEA 2000 network on your boat to exchange data with other compatible devices.

The NMEA 2000 port is labeled "Net S (+) Power" and "Net C (-) Ground", with a LEN (Load Equivalency Number) of 2.

What conditions could void the warranty of my XPLORE 10 integrated unit?

The warranty for your XPLORE 10 touchscreen display may be voided if certain conditions are not met. According to the manufacturer's warnings, the following actions will void the warranty:

Disassembling or repairing the electronic unit by unauthorized personnel.Changing the device’s serial number.Attempting to repair original equipment or accessories by unauthorized individuals.It is essential to have all work on the device performed exclusively by authorized service personnel to maintain warranty validity.