36V 60Ah Service Battery

A solid-state battery uses a non-flammable solid electrolyte instead of the volatile liquid electrolytes found in conventional lithium-ion or LiFePO4 batteries. This eliminates fire risks while providing up to twice the energy density for a significantly reduced weight.

Absolutely. Unlike many lithium batteries that require an internal heating system, our solid-state technology allows the battery to be safely charged and discharged at temperatures down to -20°C (-4°F).

The battery comes with built-in Bluetooth connectivity. Simply download the free SSM Battery Monitor HP app (available on iOS and Android) to monitor the state of charge (SoC), voltage, and other key parameters in real time directly on your smartphone.

Yes, this battery is available in several variants for advanced network integration. When placing your order, you can select the options +Victron, +NMEA 2000, +CAN or +RS-485 to connect it easily to your chartplotter or energy management system.

You can use a standard charger with a lithium battery profile. The maximum charge voltage must be set to 42V. The recommended standard charge current is 20A, though it can safely accept up to 30A.

The integrated BMS (Battery Management System) provides full protection. It automatically cuts the circuit in case of overvoltage (above 43V), undervoltage (below 25.2V), extreme temperatures (above 65°C), and protects against short circuits (up to 1000A for 2 ms).

The battery is designed to deliver more than 3,000 charge and discharge cycles at a depth of discharge (DOD) of 80%. With passive cell balancing managed by the BMS, it ensures optimal performance over many years.

Yes, series and parallel connections are allowed. According to the manufacturer's specifications, the system supports a maximum configuration of 2S4P (2 in series, 4 in parallel). Ensure you use cables with an appropriate cross-section for your installation.

To power up the battery during initial installation, press the button on the top cover until the LED lights up. Then ensure all connections are securely fastened.

The terminals use M8 bolts. It is crucial to use a torque wrench and apply a tightening torque of 10 to 12 Nm (9 to 11 ft-lbs). Never tighten the terminals by hand only, as poor contact could damage the battery.

Yes, the battery is housed in a robust ABS plastic casing with IP67 protection rating. This means it is fully protected against dust and can withstand temporary immersion in water, making it perfectly suited for demanding marine environments.

Cable cross-section depends on the total amperage of your installation. For example, for a 55A current, a 10 AWG (5.25 mm²) cable is sufficient. For higher loads approaching 105A, use 6 AWG (13.3 mm²). Always consult the amperage chart or a marine electrician to size your wiring correctly.

Solid-state technology offers maximum safety by eliminating volatile liquid electrolytes, thus removing the risk of combustion. It also provides twice the energy density of standard lithium iron phosphate (LFP) batteries. This 36V 60Ah model weighs just 9 kg while maintaining a compact footprint (Group 24). Finally, it can discharge and recharge at extreme temperatures ranging from -20°C to 70°C without requiring internal heating.

You can use a standard charger configured for a lithium battery profile. The charging voltage must be set to 42V. The recommended standard charging current is 20A, with a maximum tolerated current of 30A. The integrated Battery Management System (BMS) automatically protects the cells by cutting off charging if the voltage exceeds 43V or if the temperature falls outside the safe range.

Yes, the battery is equipped with built-in Bluetooth connectivity. Simply download the free SSM Battery Monitor HP app (available on iOS and Android) to check charge status, voltage, and other parameters in real time. For deeper integration, we offer variants with communication protocols such as NMEA 2000, CAN, RS-485, or Victron, allowing data to be displayed directly on your compatible chartplotter.