SS903 — Side Scan CHIRP through-hull transducer for NavNet TZtouchXL, 445-465 kHz, 150W, 12m cable

The Side Scan CHIRP technology laterally scans the seabed, providing high-resolution imaging of underwater structures and fish schools. It uses a range of frequencies (CHIRP) for better target separation and superior image clarity, essential for precision mapping and detailed exploration.

The AIRMAR SS903 transducer operates on a CHIRP frequency range of 445-465 kHz. This band is specifically dedicated to producing sharp, high-contrast side imaging.

The AIRMAR SS903 transducer has a transmit power of 150W.

Yes, the AIRMAR SS903 transducer is equipped with an integrated water temperature sensor, providing comprehensive environmental data to your navigation system.

The SS903 transducer housing is made of stainless steel, providing excellent corrosion resistance and high stability in a marine environment.

The AIRMAR SS903 transducer delivers optimal performance for Side Scan imaging at boat speeds between 1.5 and 8.5 knots.

The AIRMAR SS903 transducer can operate at speeds up to 30 knots, though optimal performance is observed at lower speeds.

The 445–465 kHz frequency band is specifically used by the SS903 sonar to generate highly detailed and clear side-scan images. These high frequencies provide better resolution for identifying underwater structures and precisely defining the seabed.

Yes, the AIRMAR SS903 transducer is highly effective for detecting fish schools thanks to its high-resolution side imaging, which allows identification of underwater structures and concentrations of marine life.

The AIRMAR SS903 transducer is optimized for integration with Furuno NavNet TZtouchXL multifunction chartplotters. This specifically includes the TZT10X, TZT13X, and TZT16X models.

The AIRMAR SS903 transducer is supplied with a 12-pin connector, ensuring a direct and reliable connection to compatible Furuno equipment.

The AIRMAR SS903 transducer is specifically designed and optimized for Furuno NavNet TZtouchXL systems and comes with a standard 12-pin connector for these units. Its use with equipment from other brands is not guaranteed and may require adapters or not deliver the same performance.

The SS903 transducer is compatible with the specific models in the NavNet TZtouchXL range listed here: TZT10X, TZT13X, and TZT16X. If your model is not on this list, verify compatibility with your specific unit.

The AIRMAR SS903 transducer is a thru-hull type. This installation method ensures uninterrupted water flow and consistent scanning performance because the transducer is mounted directly through the boat’s hull.

The AIRMAR SS903 transducer is supplied with a 12-metre cable.

Using fairing is recommended for hulls with a deadrise angle greater than 10°. Fairing optimizes water flow around the transducer and ensures optimal performance, supporting deadrise angles up to 22°.

You must measure the deadrise angle of your hull at the location planned for the depth sounder installation. If this angle exceeds 10°, using a fairing is recommended to ensure optimal performance and smooth water flow around the transducer.

Yes, the AIRMAR SS903 transducer is designed for use in both freshwater and saltwater. Its stainless steel housing provides excellent corrosion resistance, making it durable in marine environments.

For optimal performance, the SS903 through-hull transducer must be installed in an area with the most laminar water flow, away from turbulence generated by propellers, keels, other transducers, or water intakes. It is critical to avoid air bubbles that could disrupt the Side Scan signal.