Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 22%

B&G

000-14396-001

WS300/700 cable 20 m

B&G 20-meter mast cable, designed for wired wind sensors in the WS310 and WS700 series. It ensures a robust and reliable connection for accurate wind data transmission to your NMEA 2000 network.

Retail priceBenefit from the professional rate

97,55€

97,55€ ~~124,95€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Cable length	20.0
Wind vane / anemometer compatibility	WS300/WS310, WS700
Cable type	CAN-bus Cable
Certifications	CE
Color	Black
Number of conductors	5.0
Conductor material	Tinned Copper
Current type	DC
Outer diameter	7.0
Flexibility	Flexible
Jacket material	PVC
Max voltage	12.0
Nominal current	1.0
Pre-molded connectors	Yes
Wire gauge (AWG)	22.0
Cross-section (mm²)	0.33
Shielding	Shielded
Weight	0.96 kg
Conductor finish	Tinned

Detailed description

B&G 20m mast cable for WS300/700 wind sensors

The 20-meter B&G mast cable is an essential component for ensuring the performance and reliability of your navigation system. Specifically designed for the B&G WS310 and WS700 series wired wind sensors, this cable provides a stable and durable connection between the masthead sensor and its interface, allowing for seamless integration into your NMEA 2000® network.

Reliable connection for accurate wind data

The accuracy of your wind data depends directly on the quality of the connection between the sensor and your instruments. This 20-meter (65-foot) cable uses pre-molded connectors and a robust thermoplastic sheath to withstand the harshest marine conditions. It ensures interference-free signal transmission, providing you with the reliable and consistent wind information you need for cruising or racing.

Simplified installation and optimized performance

As a genuine B&G part, this cable is designed for optimal compatibility and performance. Pre-assembled connectors simplify installation, ensuring quick and hassle-free commissioning. The 20-meter length is suitable for a wide range of sailboats, providing a professional and durable wiring solution for your B&G anemometer.

Expert opinion

Pol CONIN

Digital Manager

« Signal reliability at the mast: the key to WS sensor performance »

This is not just a cable, but a critical link in the performance chain of B&G instrumentation. Its thermoplastic construction and overmolded connectors are specifically designed to withstand the harsh environment of the masthead (UV, salt, vibrations), a common failure point with standard cables. Using this original B&G cable is the only guarantee of perfect signal integrity for the high-precision data from WS310 and WS700 sensors. Any loss or alteration of this signal can distort layline calculations and speed polars, thereby compromising regatta performance and cruising safety.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

WS300/700 cable 20 m

97,55€

97,55€ ~~124,95€~~

Frequently Asked Questions

Need help? Contact us

Is this cable compatible with all B&G anemometer models?

No, this 20-meter cable (reference 000-14396-001) is specifically designed to be compatible with B&G WS300 and WS700 wind transducers.

What is the length of this cable?

This B&G wind transducer cable is 20 meters long.

Is this cable easy to install?

Installing the WS300/700 cable from B&G requires some marine electronics expertise. It is recommended to consult the wind sensor installation manual and, if necessary, to call in a professional.

Is the cable supplied with connectors?

The B&G WS300/700 cable (000-14396-001) is usually supplied with the necessary connectors for correct installation. Please check the documentation provided with the product for further details.

Can I use this cable with another wind transducer/vane anemometer model than the WS300 or WS700?

No, this cable is specifically designed for B&G WS300 and WS700 models. Using it with other models may cause compatibility issues and damage your equipment.

Is the cable UV-resistant and suitable for marine conditions?

Yes, the B&G WS300/700 cable is designed to withstand harsh marine conditions, including UV exposure and saltwater. However, regular inspection is recommended to detect any signs of wear.

Where can I find the installation manual for the wind transducer compatible with this cable?

The installation manual for the B&G compatible wind sensor (WS300 or WS700) is usually provided with the sensor itself. You can also download it from the B&G manufacturer's website.

What is the weight of this cable?

The approximate weight of this 20-meter B&G WS300/700 cable is 0.96 kg.

Is this cable sold individually?

Yes, this B&G WS300/700 20m cable (000-14396-001) is sold individually.

Are there any specific precautions to take when installing the cable?

Yes, it is important not to bend or pinch the cable during installation, as this could damage the internal wires. Ensure that the connectors are properly secured and watertight.

Is this cable compatible with the NMEA 2000 system?

This cable is used to connect the wind transducer to the rest of the system. NMEA 2000 compatibility will depend on the wind transducer itself and its interface, not directly on the cable.

Can I cut the cable if it is too long?

Cutting the cable is not recommended. If the length is excessive, it is better to coil it carefully, avoiding tight loops. Cutting the cable could affect its performance and void the warranty.

What is the difference between this cable and a standard cable?

This cable is specifically designed for B&G WS300 and WS700 wind transducers. It is made with marine-grade materials and is built to withstand harsh environmental conditions. A standard cable may not offer the same durability and performance.

Is this cable waterproof?

The cable itself is designed to withstand moisture and water spray. However, the watertightness of the connection will depend on the quality of the connector installation and the use of appropriate seals.

Is this cable compatible with other B&G wind transducers besides the WS300 and WS700?

This cable is specifically designed for B&G WS300 and WS700 wind transducers. Compatibility with other models is not guaranteed.

What is the exact length of this cable?

This cable for B&G WS300/700 wind transducer has a length of 20 meters.

Is the cable supplied with connectors?

The information regarding the presence of connectors is not available in the product description. It is recommended to verify with the supplier or manufacturer.

Where can I find installation instructions for this cable?

Installation instructions are generally provided with the product. You can also consult the B&G manufacturer's website for documentation or contact their technical support.

Is this cable easy to install yourself?

Installing a wind transducer cable may require some marine electronics skills. If you are not sure you can perform the installation correctly, it is recommended to hire a professional.

What is the cable diameter?

The cable diameter is not specified in the product description. Please refer to the manufacturer’s technical datasheet for this information.

Is this cable compatible with older B&G wind transducer models?

This cable is designed for WS300 and WS700 models. Compatibility with older models is not specified. It is recommended to verify compatibility with the manufacturer.

Is this cable supplied with a warranty?

The presence and duration of any warranty are not mentioned in the product description. Please verify the warranty conditions with the seller or manufacturer.

Can I cut this cable to the desired length?

Cutting the cable is not recommended as it could affect its operation and void the warranty. If a specific length is required, it is best to check if other lengths are available.

What type of connector is used for this cable?

The information about the type of connector used is not available in the product description. Please refer to the manufacturer's technical documentation to obtain this information.

Is this cable compatible with instruments from other brands?

This cable is designed to work with B&G WS300 and WS700 wind transducers. Compatibility with instruments from other brands is not guaranteed.

Does replacing the cable require recalibrating the wind transducer?

A calibration of the wind transducer/vane anemometer may be required after replacing the cable. Consult the wind transducer/vane anemometer’s user manual for the calibration procedure.