Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 12%

B&G

000-14538-001

HALO24 Radar

The B&G HALO24 24-inch pulse compression dome radar offers superior target detection from short to long range (48 NM). Doppler VelocityTrack™ technology and rotation up to 60 rpm instantly identify hazards, with seamless Ethernet integration to B&G multifunction displays for dual-range operation.

This model is part of B&G's current range of HALO dome radars.

Included: HALO24 Radome, 20m Halo cable, Ethernet adapter (RJ45 to 5 pin, 1.5m), mounting kit (M8x30 bolts, washers), waterproof cable grommet, cable retention kit, documentation.

Retail priceBenefit from the professional rate

2.481,48€

2.481,48€ ~~2.835,00€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Product diameter	610
Product height	225
Operating voltage	10.5-31.2
Max power consumption	29
Radar technology	Solid-State Pulse Compression
Max radar range	48
Recommended fuse rating	5
Radar rotation speed	60
Horizontal beam width	3.9
Waterproof	IPX6
Typical power consumption	20
Sweep bandwidth	48
Pulse length	0.04 - 64
Compass safe distance	70
Noise figure	< 5
Min radar range	6
Wired network	Ethernet
Operating temperature	-25 to +55
MARPA tracking	Yes
Radar transmit power	25
Radar band	X-band
Radar antenna / radome type	Radome
Product width	610
Standby consumption	3.9
Product weight	6.75

Detailed description

The Radar HALO24 from B&G is a 24-inch pulse-compression radome designed to provide unmatched target detection at short, medium, and long range. Featuring Doppler VelocityTrack™ technology, dual-range simultaneous operation, and a rotation speed of up to 60 RPM at short range, this compact and lightweight radar enhances situational awareness and collision avoidance. It represents a significant advancement over traditional magnetron radars, offering instant-on operation and low power consumption.

Doppler VelocityTrack™ and pulse-compression technology

Doppler VelocityTrack™ technology provides instant visual feedback on radar target motion. A simple color-coding system identifies potential hazards, highlighting targets approaching while reducing visibility of those moving away. The Radar HALO24 automatically processes every visible target, eliminating the need for manual selection. Pulse-compression technology ensures optimal detection at all ranges, while beam sharpening improves separation between small or distant targets.

Operational performance

With a rotation speed of 60 RPM for ranges up to 1.5 nautical miles, the Radar HALO24 delivers near real-time data, essential for avoiding collisions with fast-moving targets. The dual-range function allows simultaneous monitoring of two distinct distance scales from a single radome, for example keeping an eye on a distant weather cell while monitoring nearby fishing pots. The MARPA target-tracking feature can track up to 10 selected targets (or 20 in dual-range mode). Preconfigured modes (Harbor, Large, Weather, Birds) adjust settings to ensure optimal visibility in all conditions.

Radar HALO24 technical specifications

The Radar HALO24 offers a maximum range of 48 nautical miles. Its peak power is 25 W, powered by a 12/24 V DC system. Typical power consumption is 20 W, peaking at 29 W, and 3.9 W in standby. The horizontal beam width is 3.9° nominal (2° with high target separation) and 22° for the vertical beam. The radome measures 610 mm in diameter and 225 mm in height, weighing 6.75 kg without the cable. The unit is IPX6 waterproof and operates in a temperature range from -25°C to +55°C. Connectivity to the B&G multifunction display network is via Ethernet.

Documentation

Type	Nom
	EN - Manuel d'installation - radars dôme HALO20/20+/24
	EN - Gabarit de montage - radars dôme HALO20/20+/24
	EN - Déclaration de Conformité CE - Radar HALO24
	EN - Déclaration de conformité de spectre radio - Radar HALO24
	EN - Certificat de conformité MIC japonais pour équipement radio - Radar HALO24
	EN - Certificat d'autorisation d'équipement FCC - Radar HALO24
	EN - Certificat d'approbation de type d'équipement de transmission radio - Radar HALO24

Expert opinion

Pol CONIN

Digital Manager

« HALO24: Doppler clarity for uncompromising safety »

The B&G HALO24 radar represents a major advance in safety for cruising and racing sailboats. Its 100% solid-state technology eliminates the main source of failure in traditional radars: the magnetron. The result is increased reliability and InstantOn™ functionality, making it operational immediately—a critical advantage in emergency situations. The integration of Doppler VelocityTrack™ technology is a genuine game-changer, transforming the radar from a simple detection tool into a proactive collision-avoidance system. Its ability to rotate up to 60 RPM at short range delivers unmatched display smoothness, essential for navigating in busy harbors or channels. Connected via Ethernet, it seamlessly integrates into the B&G ecosystem, offering a high-performance, reliable radar solution with low power consumption.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

HALO24 Radar

2.481,48€

2.481,48€ ~~2.835,00€~~

Frequently Asked Questions

Need help? Contact us

Is the B&G HALO24 radar easy to install?

Installing the B&G HALO24 radar is simplified by a provided mounting template. Ensure the template is oriented correctly so the scanner's front faces the boat's bow. The mounting surface thickness must be between 3 mm and 18 mm.

Is the B&G HALO24 radar waterproof?

Yes, the B&G HALO24 radar is IPX6 certified, meaning it is protected against powerful water jets.

What is the required power supply voltage for the B&G HALO24 radar?

The B&G HALO24 radar operates on an input voltage of 10.5 to 31.2 V DC and includes reverse polarity protection.

What is the minimum recommended distance for installing the B&G HALO24 radar near the ship's compass?

The minimum recommended distance to install the B&G HALO24 radar near the vessel's compass is 0.7 metres (2.3 feet).

What is the maximum length of the interconnect cable for the B&G HALO24 radar?

The maximum length of the interconnection cable for the B&G HALO24 radar is 30 meters (98.5 feet).

Does the B&G HALO24 radar use a magnetron?

No, the B&G HALO24 radar does not use a magnetron. It is fully solid-state and features Instant On™ technology.

What is the role of the Doppler VelocityTrack™ technology integrated into the B&G HALO24 radar?

The Doppler VelocityTrack™ technology instantly distinguishes potentially hazardous targets by analyzing their speed.

What precautions should be taken when installing the B&G HALO24 radar?

During installation, ensure the B&G HALO24 radar is not on the same plane as a conventional pulse radar. If so, the pulse radar must be in STBY or OFF mode when the HALO radar is operating. Also ensure an unobstructed view around the vessel.

What is the horizontal beam width of the B&G HALO24 radar?

The horizontal beam width of the B&G HALO24 radar is 3.9° nominal (-3 dB width).

Does the HALO24 radar use Doppler technology?

Yes, the HALO24 radar is equipped with Doppler VelocityTrack™ technology to identify moving targets and aid in collision avoidance.

Is the HALO24 radar easy to install?

Installing the HALO24 radar requires carefully following the instructions in the provided installation manual. A mounting template is included to simplify drilling. It is recommended to verify correct orientation before drilling.