213 Mast cable 50 m

The B&G 213 mast cable, 50 meters long, connects the 213 Masthead Unit wind transducer/vane anemometer to H5000 series or H3000 series navigation displays. Its multicore, braided-shield architecture transmits wind data without electromagnetic interference. The product includes only the 50m cable with its pre-molded waterproof connectors.

Retail priceBenefit from the professional rate

532,25€

532,25€ ~~598,50€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Cross-section (mm²)	0.34
Wire gauge (AWG)	22.0
Number of conductors	6.0
Color	Black
Shielding	Shielded
Flexibility	Flexible
Current type	DC
Jacket material	PVC
Conductor material	Tinned Copper
Certifications	CE
Conductor finish	Tinned
Cable type	Control Cable
Cable length	50.0
Compatible network	B&G Proprietary
Pre-molded connectors	Yes
Installation location	mast
Cable application	Wind Sensor
Operating temperature	-10 to +55
Storage temperature	-20 to +60
Min bend radius	100
Connector type	B&G 213 molded connector (sensor side) / Bare wires
Shielding type	Braided shield
UV resistance	Yes
Cable routing	Mast Interior
Data transmitted	Wind Speed and Angle
Product range	Series 213
Signal Type	Analog
System compatibility	B&G H5000, H3000
IP rating	IP67
Weight	2.88 kg

Detailed description

The B&G 213 mast cable (50m) connects the 213 Masthead Unit wind transducer/vane anemometer to onboard computers and displays. It transmits wind data (speed and angle) from the masthead.

Data transmission

Unlike NMEA 2000 backbone cables, the 213 mast cable uses a multi-core architecture with braided shielding. This shielding isolates analog signals from electromagnetic interference (VHF, radar, AIS) present in a mast. It powers the algorithms of B&G H5000 navigation systems or H3000 systems.

Marine environment design

The 50-metre length is suited to large sailboats, from offshore racing monohulls to superyachts. The outer jacket is UV-resistant and resists salt corrosion. Pre-moulded connectors ensure watertight integrity at the masthead.

Expert opinion

Pol CONIN

Digital Manager

« Expert review - B&G 213 mast cable 50 m »

This cable is an integration part, not a universal accessory. Its value lies mainly in compliance with the B&G 213 standard: correct length, clean connectors, protected routing, and no makeshift splices. For a wind sensor upgrade, I recommend it when the 36 m length does not provide enough margin. However, it should not be presented as a standard marine network cable: it is neither Ethernet nor generic NMEA 2000.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.