Side Entry CableClam - Side Entry CableClam

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

En cours de réapproSave 12%

Blue Sea Systems

1007-BSS

Side-entry CableClam cable gland

Designed for clean cable management, the BLUE SEA CableClam Side Entry (1007-BSS) provides a watertight solution for side entry of cables up to 25 mm in diameter. It is ideal for installations requiring a low profile and effective protection against water. The product includes a deck ring, a gasket, and a compression nut.

Retail priceBenefit from the professional rate

8,01€

8,01€ ~~9,10€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Maximum cable diameter (mm)	25.0
Mount type	Low Profile
Splittable	No
Application Environment	Mariner
Base height	4.83
Height	19.81
Length (mm)	53.34
Mounting Screw Size Imperial	#8
Product brand	Blue Sea Systems
Model name	1007 CableClam Side Mount
Product use	Optimized cable management and protection for marine installations.
Product range	CableClam
Product type	Cable gland
Width	14.22

Detailed description

Designed for optimized cable management and protection, BLUE SEA’s CableClam Side Entry (part number 1007-BSS) provides a watertight cable pass-through solution with a side entry. This model is intended for marine installations where discreet and secure cable routing is required, particularly for cables passing through a bulkhead or deck from the side, minimizing bending stress and direct exposure to the elements.

Design and dimensions

The CableClam Side Entry features compact dimensions: 53.35 mm (2.10 in) in length, 19.69 mm (0.78 in) in height, and 14.20 mm (0.56 in) in width. It includes a mounting hole sized for a #8 screw, ensuring stable attachment to various surfaces. The main opening accommodates cables up to 25 mm (0.984 in) in diameter, making it compatible with a wide range of power, data, or transducer cables.

Positioning in the range

Unlike top-entry cable glands or multi-cable models, the CableClam Side Entry is optimized for space-constrained situations or when a side exit is preferable for aesthetic or technical reasons. Its low-profile design reduces snagging risk and integrates discreetly on deck or hull. This model differs from other BLUE SEA cable gland solutions by its entry orientation, offering a flexible alternative to traditional vertical installations for effective protection against water ingress.

Documentation

Type	Nom
	EN - Dimensioned Drawing - Side Entry CableClam
	EN - Instructions - Side Entry CableClam

Expert opinion

Pol CONIN

Digital Manager

« Compact and watertight solution for side cable entries »

The BLUE SEA CableClam Side Entry is a key component for a clean and secure marine electrical installation. Its practical value lies in providing a watertight entry point for a single cable with a side exit. This is particularly useful for integrating sensors, antennas, or NMEA 2000 cables where a low profile is desired or vertical space is limited. It allows the cable to be routed along a surface after passing through, avoiding loops or direct mechanical stress on the seal.

For installation, it is critical to properly prepare the entry hole and use the correct fasteners for the mount (#8). Applying a marine sealant under the CableClam base is recommended for maximum protection, in addition to the integrated gasket. This type of cable gland is ideal for sailboats and small to medium-sized powerboats where the need to run individual cables through the deck or hull is common. It is less suitable for installations requiring multiple cables or very large-diameter cables, for which multi-cable glands or larger sizes would be more appropriate.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Side-entry CableClam cable gland

8,01€

8,01€ ~~9,10€~~

Frequently Asked Questions

Need help? Contact us

What is the BLUE SEA CableClam Side Entry cable gland used for?

The BLUE SEA Side Entry CableClam is designed for managing and protecting cables watertight on boats. It allows secure cable entry through a bulkhead or deck, minimizing bending stress and direct exposure to the elements thanks to its side entry design.

What are the exact dimensions of the CableClam Side Entry?

The CableClam Side Entry has the following dimensions:

Length: 53.35 mm (2.10 in)
Height: 19.69 mm (0.78 in)
Width: 14.20 mm (0.56 in)

What type of screw is required to mount the CableClam Side Entry?

The CableClam Side Entry integrates a mounting hole specifically sized for a #8 screw.

How to install the CableClam Side Entry cable gland?

Here are the installation steps for the CableClam Side Entry:

Pass the cable through the central hole of the gasket.Insert the cable into the groove of the deck ring.Tighten the deck ring and gasket to the surface by turning each screw a few turns at a time. Do not overtighten the screws.

Is the CableClam Side Entry waterproof?

Yes, the BLUE SEA CableClam Side Entry is designed to provide a watertight cable entry solution, protecting connections from water ingress.

What are the advantages of the side-entry design of this CableClam?

The side-entry design of the CableClam offers several advantages:

It is optimized for situations where space is limited.It allows side exit of cables, which can be preferable for aesthetic or technical reasons.It ensures a low-profile installation, reducing the risk of snagging.It integrates discreetly on the deck or hull.It minimizes cable bend constraints.