[CYCLOPS] Câble d'extension de 10m pour antenne dôme — vue 1

[CYCLOPS] Câble d'extension de 10m pour antenne dôme — vue 2

[CYCLOPS] Câble d'extension de 10m pour antenne dôme — vue 3

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

Cyclops Marine

AC07

10m extension cable for dome antenna

10 m extension cable for dome antenna for antenna, coaxial or satellite connection, suitable for CYCLOPS installations. Length specified: 10 m.

Retail priceBenefit from the professional rate

81,70€

81,70€ ~~86,00€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Cable type	Coaxial cable
Cable segment	Antenna / coax / satellite
Compatibility Scope	Exact reference of the equipment to verify before ordering
Compatible brand	Cyclops Marine
Environment	Marine installation
Installation Advice	protect fittings, minimize connections, and maintain a dry service loop
Installation Check	the connector, the operating frequency, and the acceptable losses over the installed length
Length	10 m
Length M	10
Product Usage	Antenna and communications
Signal Type	RF
Skysat Usage	antenna connection, coaxial or satellite

Detailed description

10m extension cable for dome antenna is an antenna cable designed for antenna linking, coaxial or satellite. It complements an existing installation or replaces a worn cable while maintaining a reference suitable for marine electronics.

This sheet belongs to the Antenna / coaxial / satellite family. Specified length: 10 m. Signal or protocol: RF. Compatibility must be confirmed with the exact Cyclops Marine equipment before ordering.

For reliable installation, protect the connectors, minimize splices, and maintain a dry service loop. Also check the connector, operating frequency, and acceptable losses over the installed length before sealing cable passages.

Expert opinion

Pol CONIN

Digital Manager

« Review Skysat - 10m extension cable for dome antenna »

Skysat tip: select this cable based on the device to be connected, not just available length. Check the connector, pinout, and actual routing inside the boat before ordering.

When the cable runs through mast, coachroof, or damp areas, leave a service loop, protect joints, and avoid intermediate splices. This prevents many difficult diagnostics after installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

10m extension cable for dome antenna

81,70€

81,70€ ~~86,00€~~

Frequently Asked Questions

Need help? Contact us

What is a 10m extension cable for dome antenna used for?

10m extension cable for dome antenna serves the following function: antenna connection, coaxial or satellite. It is intended for installations where you want to maintain a reference suitable for the equipment rather than an approximate cable.

Which equipment is it compatible with?

Compatibility depends on the exact model of the Cyclops Marine device. Before ordering, check the connector, pinout, and documentation of the equipment to be connected.

What needs to be checked before installation?

Check the connector, the operating frequency, and the allowable losses over the installed length. Also account for the actual cable routing, bulkhead penetrations, and service margins at the ends.

How to install it cleanly on board?

protect the connections, minimize splices, and maintain a dry service loop. Connectors must not bear tensile load, and exposed fittings must be shielded from moisture.

Does the indicated length always suffice?

The indicated length is 10 m. Measure the actual passage inside the boat before ordering, adding the necessary margin for bends, drops, and service loops.

Why choose an OEM part?

A manufacturer reference minimizes the risk of wiring errors, connector mismatches, or signal level issues. This is particularly critical for CYCLOPS links, radar, antenna, marine bus, or data connections.