[CYCLOPS] Smartlink² 20t ee capteur d'effort — vue 1

[CYCLOPS] Smartlink² 20t ee capteur d'effort — vue 2

[CYCLOPS] Smartlink² 20t ee capteur d'effort — vue 3

[CYCLOPS] Smartlink² 20t ee capteur d'effort — vue 4

[CYCLOPS] Smartlink² 20t ee capteur d'effort — vue 5

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 5%

Cyclops Marine

SE05

Smartlink² 20t ee load cell

The CYCLOPS Smartlink² 20t ee is a wireless load cell made of Ti6Al4V titanium, designed to measure dynamic loads up to 20 tonnes with an accuracy of ±1%. IP68 certified, it integrates via Bluetooth with the mobile app or marine electronics systems via an optional gateway, providing essential real-time monitoring for high-performance rigging. Its rugged design and pin-to-pin compatibility make it a tool for demanding marine applications.

Includes a wireless charger.

Retail priceBenefit from the professional rate

4.902,00€

4.902,00€ ~~5.160,00€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available to order

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Typical power consumption	0.0004625 W
Product width	80 mm
Product height	156.9 mm
Product depth	40 mm
Ingress protection	IP68
Bus compatibility	Bluetooth
Mounting type	Pin-to-pin / Eye-to-eye
Certifications	Machinery Directive 2006/42/EC
Measurement range	-10 to +40
Linearity	±1%
Sensor output type	Wireless (Bluetooth)
Sensor connection type	Pin-to-pin / Eye-to-eye
Sensor type	Load cell
Sensor compatibility	Cyclops Marine mobile app (Bluetooth), marine electronics systems (B&G, Sailmon, Garmin, nke) via optional Smartfittings bridge
Data output	Load data (stress)
Update rate	1 Hz (adjustable from 0.1 to 10 Hz)
Operating temperature range	-10 to +40°C
Working Load Limit	20000 kg
Breaking Load	80000 kg
Pin Diameter	34.9 mm
Measurement Accuracy	±1%
Wireless Protocol	Bluetooth
Battery life	8000 h
Charging Time	1 hour
Product dimensions	156.9 x 80 x 40 mm
Material	Titanium Ti6Al4V (body), PC/ABS (housing)
App Compatibility	iOS, Android
Battery Capacity Wh	0.925
Battery type	Lithium Polymer
Charging method	Wireless induction
Configurable Units	Yes
Data Export Format	.csv
Data Key Format	12-character key
Data Logging Capability	Yes
Exported Data Content	Load data (stress), Local time, GPS data, Minimum load, Maximum load, Average load
Indicator Lights	LED (charge status)

Detailed description

Designed for precise measurement of dynamic loads in demanding marine environments, the CYCLOPS Smartlink² 20t ee is a high-performance wireless load cell. Ideal for superyachts, offshore racing sailboats and cruisers, it provides real-time tension data for halyards, sheets and backstays, optimizing rigging adjustments.

Design and robustness

The Smartlink² 20t ee is made from Ti6Al4V titanium, offering an exceptional strength-to-weight ratio. Its PC/ABS housing is rated IP68, ensuring protection against water and dust. With dimensions of 156.9 x 80 x 40 mm and a weight of 770 g, this load cell is designed for direct integration into eye-to-eye or pin-to-pin assemblies, with a shaft diameter of 34.9 mm. Its Working Load Limit (WLL) is 20 tonnes.

Measurement and accuracy

This load cell delivers an accuracy of ±1% of WLL across a temperature range from -10°C to +40°C. It is optimized for extreme loads, ensuring reliable data collection for high-stress applications. The default data transmission frequency is 1 Hz, adjustable via the Smartfittings app between 0.1 and 10 Hz.

Connectivity and features

The Smartlink² 20t ee connects via Bluetooth to the Cyclops Marine mobile app, enabling real-time data visualization and recording. For integration with onboard electronic systems (B&G, Sailmon, Garmin, nke), an optional Smartfittings gateway is required. Power is supplied by a 0.925 Wh Lithium Polymer battery, offering up to 8,000 hours of autonomy in extended use mode. Charging is performed wirelessly via induction, with a full charge in 1 hour. LED indicators display charge and operational status.

Documentation

Type	Nom
	Copy of App Guide Issue 9 EN.pdf
	Copy of smartlink2 EE guide issue 1.pdf
	Copy of App Guide Issue 9 FRA.pdf

Expert opinion

« Expert analysis: CYCLOPS Smartlink² 20t ee, the load sensor for extreme rigging »

The CYCLOPS Smartlink² 20t ee load cell is a solution designed for professionals and competitors seeking reliable and repeatable load measurement on rigging subjected to very high stresses. With a working load limit of 20 tonnes, it is specifically aimed at superyachts, offshore racing sailboats, and high-performance cruising units requiring precise control of tensions on halyards, sheets, or backstays. Its direct integration into rigging systems via pin-to-pin or eye-to-eye mounting simplifies implementation without major modifications to existing fittings, provided the recommended shaft diameters (34.9 mm for this model) are used.

Bluetooth connectivity to the dedicated app provides instant data viewing and recording capabilities, essential for post-sailing analysis and polar optimization. For full integration into the onboard electronics ecosystem (NMEA 2000), adding a Smartfittings gateway box is mandatory. This bridge enables load data to be displayed on multifunction displays from brands such as B&G, Garmin, or Sailmon, turning the sensor into a key element of the navigation system for performance and safety. It is important to note that without the gateway, data access is limited to the mobile app, which may be a limiting factor for certain configurations.

Its construction in Ti6Al4V titanium and IP68 rating provide resistance to harsh marine environments, ensuring durability and consistent measurements over time. Inductive wireless charging is a practical advantage, eliminating exposed connectors and simplifying maintenance. This sensor is a strategic investment for crews aiming to fine-tune sail settings and monitor structural stresses in real time, thereby contributing to both performance and damage prevention on large or racing units.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Smartlink² 20t ee load cell

4.902,00€

4.902,00€ ~~5.160,00€~~

Frequently Asked Questions

Need help? Contact us

What is the working load limit (WLL) of the Smartlink² 20t ee sensor?

The Smartlink² 20t ee sensor has a Working Load Limit (WLL) of 20 tonnes. It is critical never to exceed this limit to avoid damaging the internal instrumentation.

How is the Smartlink² 20t ee load sensor connected to my smartphone?

The Smartlink² 20t ee sensor connects to your smartphone via Bluetooth to the Cyclops Marine mobile application. This application allows you to view and record data in real time.

What materials are used to manufacture the Smartlink² 20t ee?

The Smartlink² 20t ee sensor body is made of Ti6Al4V titanium, known for its strength-to-weight ratio. Its housing is PC/ABS and rated IP68, ensuring protection against water and dust.

What is the battery life of the sensor and how is it recharged?

The sensor is powered by a 0.925 Wh lithium polymer battery. It offers up to 8,000 hours of battery life in extended use mode and 2,000 hours in 'powered on' mode. Charging is done via wireless induction and a full charge takes approximately 1 hour.

Can the Smartlink² 20t ee be integrated with existing onboard electronic systems?

Yes, for integration with onboard electronic systems such as B&G, Sailmon, Garmin, or nke, an optional Smartfittings gateway box is required.

What are the dimensions and weight of the Smartlink² 20t ee sensor?

The Smartlink² 20t ee sensor has dimensions of 156.9 x 80 x 40 mm and weighs 770 g. It is designed for direct integration into eye-to-eye or pin-to-pin assemblies.

What is the measurement accuracy of the Smartlink² 20t ee sensor?

The sensor delivers an accuracy of ±1% of the WLL (Working Load Limit) over a temperature range from -10°C to +40°C. This accuracy is achieved using standard shackles sized to match the pin diameter.

How to correctly install the Smartlink² 20t ee sensor with shackles?

The Smartlink² 20t ee is designed to be installed inline with pin-to-pin fittings or eye-to-eye fittings, such as shackles. Cyclops Marine recommends using 17-4 PH shackles or pins with a diameter matching the sensor’s holes, i.e., 34.9 mm for the 20t ee model (SE05).

What happens in case of overload on the Smartlink² 20t ee sensor?

Exceeding the Safe Working Load (WLL) of the Smartlink² 20t ee can damage internal instrumentation and void the warranty. An overload exceeding 150% of the WLL or a severe impact may cause permanent damage requiring recalibration.

What are the operating modes of the Smartlink² 20t ee sensor and its data output frequencies?

The Smartlink² 20t ee sensor has three modes:

Mode 'Powered on': Ideal for general use, with a data frequency of 1 Hz and a battery life of 2,000 hours. Mode 'Extended use': To save battery, with a data frequency of 0.25 Hz and a battery life of 8,000 hours. Mode 'Off': For transport or extended storage, with no data transmission and a battery life of 2 years. The 'Extended use' and 'Off' modes can only be activated from the 'Powered on' mode.