Kit PCA de montage DIN ACOI CZone avec câble 230 V

This is an AC (alternating current) output interface designed for managing and controlling AC electrical circuits onboard a vessel. This module facilitates networking, monitoring, and control of alternating current equipment, integrating protection and load management features.

The CZone ACOI DIN MNT PCA kit C/W TAIL 230V is specifically designed to manage circuits operating on 230V alternating current.

This module is equipped with 8 x 50A relays, allowing control of multiple AC loads.

The CZone ACOI DIN MNT PCA kit C/W TAIL 230V supports frequencies of 50 or 60 Hz for the circuits it manages.

Yes, each output channel has built-in current monitoring, displaying circuit status and real-time operating current.

The design of this module allows management of multiple pole configurations, including double, triple, and four-pole, offering high flexibility for electrical installations.

Yes, the CZone ACOI DIN MNT PCA kit C/W TAIL 230V design allows management of two separate bus power feeds within a single unit, which is ideal for organizing and controlling separate load groups.

The weight of this module is 1.1 kg.

The CZone ACOI DIN MNT PCA kit C/W TAIL 230V has intrusion protection rated IPx5. This means it is protected against low-pressure water jets from any direction, making it suitable for a marine environment.

Yes, the CZone ACOI DIN MNT PCA kit C/W TAIL 230V module is CE, ABYC, and NMEA certified, ensuring compliance with marine equipment standards and requirements.

This module is designed for easy integration and is compatible with standard DIN rails, simplifying its installation in existing or new electrical panels.

Yes, it is important to ensure the chosen location for the module is easily accessible for maintenance and fuse replacement. Additionally, the bulkhead on which the unit will be mounted must be strong enough to support its weight, and sufficient clearance must be provided above the module to allow the cover to be removed.

The CZone ACOI module requires a direct current (DC) power supply for its internal operation and NMEA 2000 communication. This power supply is connected via an M8 (5/16") stud for the positive terminal (max torque 8–10 Nm) and an M6 (1/4") stud for the negative terminal (max torque 4–5 Nm). The 230 V AC circuits it controls are managed separately.

The module’s address on the CZone network is set using DIP switches. It is critical that each module has a unique DIP switch number matching the setting in the software configuration to function properly on the network.

Yes, the CZone ACOI module, like other CZone modules, has a USB port that allows easy system updates, including firmware and configuration, using a USB flash drive.

Yes, this module is fully compatible with the NMEA 2000 network. It is designed to communicate via this standard protocol, enabling seamless integration and interaction with other NMEA 2000-compatible devices aboard.

For configuration, *.zcf files (configuration file) and CZone.bak (backup copy) are used. For firmware updates, *.czfwp files are required. *.csv files can also be generated to list system and connected module information.

The USB drive used for CZone system updates must be formatted as FAT32. USB drives up to 32 GB are recommended, and most common brands have been verified for compatibility.

Yes, as an AC output interface, the CZone ACOI DIN MNT PCA kit C/W TAIL 230V is specifically designed to integrate and extend control and monitoring capabilities to AC circuits within an existing CZone digital switching system.

Although the CZone ACOI module manages AC circuits at 230V for loads, its internal power supply and NMEA 2000 communication are designed to operate with DC systems from 9 to 32V. This makes it compatible with typical marine installations using 12V or 24V DC systems for powering the module itself.