Dry case for inReach Mini

The Garmin inReach® Mini dive case is an accessory specifically designed to protect your inReach Mini satellite communicator during underwater activities. It allows you to carry the device safely and ensures its communication capabilities once back on the surface.

The primary function of this housing is to provide waterproof protection for your inReach Mini device, making it suitable for diving use. It allows divers to safely carry their inReach Mini underwater and use it for communication once they resurface.

This unit is certified for immersion up to 10 ATM. This corresponds to a depth of approximately 100 meters.

Yes, in addition to its waterproofing, the inReach® Mini dive case is designed to provide robust protection against shocks and impacts, thus protecting your inReach Mini device in demanding environments.

Yes, the case is designed with a transparent window that allows you to view the screen of your inReach Mini once it is inserted inside, although direct interaction with the screen may be limited underwater.

The housing is designed to protect the device and maintain its waterproofing. The buttons on the inReach Mini are generally not accessible or functional once the device is sealed inside the dive housing, especially underwater. Use and communication are intended once the housing is opened and the device is removed, or once at the surface.

The inReach® Mini dive case is not specifically designed to float. It is recommended to secure it to your dive equipment to prevent loss if it is dropped in the water.

Yes, the housing is designed to withstand harsh marine environments, including salt water and sand. It is recommended to rinse it with fresh water after each use at sea to extend its lifespan and maintain its integrity.

The inReach® Mini dive case is usually equipped with attachment points or loops to secure it to your dive gear or a strap. However, specific straps or mounting systems may be sold separately or included depending on the package.

Yes, the inReach® Mini dive case is designed to be fully reusable. Simply open it, remove the device, clean and dry it properly before the next use.

Thanks to its waterproof certification down to 10 ATM (approximately 100 meters), the housing is suitable for both freediving and scuba diving within the specified depth limits.

The housing is designed to protect the device underwater. Once at the surface, for optimal GPS and satellite signal reception, it is recommended to remove the inReach Mini from the housing. The housing itself may slightly attenuate the signal if it is not fully open or if the device remains inside.

Yes, the inReach® Mini dive case is supplied with a user manual that provides detailed instructions on its installation, use, and maintenance to ensure optimal protection of your device.

Yes, the housing is designed to be easy to clean. After each use at sea, it is recommended to rinse it thoroughly with fresh water, dry it carefully, and check the seals for any salt or sand residue.

This dive case is specifically designed to be compatible with Garmin inReach Mini series satellite communicators.

Yes, the inReach® Mini dive case is compatible with the inReach Mini 2, as well as with the original inReach Mini model, since they share the same form factor.

No, this housing is specifically designed and sized for Garmin’s inReach Mini series. It is not guaranteed to be compatible or to maintain waterproofing with devices from other brands or other Garmin models.

To correctly insert your inReach Mini, open the housing, position the device in the dedicated slot ensuring it is properly secured. Check that the sealing gaskets are clean and free of debris before firmly closing the housing according to the user manual instructions.

Yes, it is critical to ensure that O-rings (or sealing gaskets) are clean, free of sand, hair, or any other particles. Check that they are correctly positioned and lubricated if necessary, then close the housing firmly and evenly, following the latches or tightening screws indicated in the manual to guarantee a perfect seal.

It is not necessary to remove the battery from the inReach Mini before placing it in the dive housing. The housing is designed to protect the device as-is. However, it is recommended to ensure the device is powered off or in sleep mode to conserve battery during the dive.