Kit Capteur de vent à ultrasons avec câble de 1.5m

Ultrasonic wind sensor kit with 1.5m cable

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 12%

FT Technologies

FT743-D-SM KIT-1.5

Ultrasonic wind sensor kit with 1.5m cable

The FT Technologies FT743-D-SM KIT-1.5 ultrasonic wind sensor kit is a robust and precise solution for measuring wind speed (0-75 m/s) and direction in marine environments. Equipped with Acu-Res® technology and an RS485 interface, it provides IP67 protection and C5-M corrosion resistance for long-term reliability. This kit includes the FT743-D-SM ultrasonic wind sensor and a 1.5m FT009 cable.

Retail priceBenefit from the professional rate

2.990,83€

2.990,83€ ~~3.418,09€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Low stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Wired network	RS485, RS422
Compatible systems	Navigation systems compatible with RS485/RS422
Mast material	Not provided (sensor housing in anodized aluminum)
Anemometer type	Ultrasound (Acu-Res®)
Housing material	Hard anodized aluminum
Operating voltage	6-30
Cable length	1.5
Wind vane / anemometer compatibility	FT742-SM, FT743-SM
Operating temperature	-40 to +85
IP rating	IP67
Mounting type	Surface mounting (screw-on)
Cable Current Rating	2
Cable Individual Wire Diameter	0.25
Minimum bend radius of cable	70
Cable Voltage Rating	30
Corrosion Resistance Class	C5-M
Heater Temperature Range	0 to 55
Integrated Heater	Yes
Min Power Supply Current	2
Weight	0.352
Wind Speed Measurement Range	0-75

Detailed description

Designed for demanding marine environments, the FT743-D-SM KIT-1.5 ultrasonic wind sensor kit from FT Technologies provides accurate and reliable measurement of wind speed and direction. This digital sensor integrates FT Technologies’ patented Acu-Res® technology, which automatically compensates for variations in temperature, pressure, and humidity to deliver stable data. With a wind speed measurement range of 0 to 75 m/s and RS485 connectivity, this model is a robust solution for applications requiring high data integrity.

Design and technical performance

The FT743-D-SM stands out for its lack of moving parts, significantly reducing maintenance requirements and increasing long-term reliability. Its hard-anodized aluminum construction provides corrosion resistance to C5-M class and IP67 protection, ensuring operation even after temporary immersion or in intense dust conditions. The sensor operates within an extended temperature range of -40 °C to +85 °C and features integrated thermostatically controlled heating, configurable from 0 to 55 °C, to prevent icing. Weighing 252 g (sensor only) and 0.1 kg (cable), it is lightweight and compact. It is powered by 6 to 30 VDC (minimum 2A).

Integration and positioning within the FT Technologies range

The FT743-D-SM KIT-1.5 kit includes the FT743-D-SM wind sensor and a 1.5m FT009 cable, specifically designed for use with FT742-SM and FT743-SM sensors. This cable is rated for 30VDC / 2A and has a minimum bending radius of 70 mm. Compared to the FT6 series, which is lighter at 170 g, the FT743-D-SM from the FT7 series offers a potentially higher wind speed range (up to 90 m/s for the FT7 series in general) and robustness suitable for the most demanding applications. The FT743-D-SM differs from models like the FT702LT, which provides 4-20 mA analog outputs in addition to RS485, by focusing on digital RS485 connectivity for simplified integration into modern systems. Each sensor is factory-calibrated and requires no scheduled recalibration, ensuring data availability exceeding 99.9%.

Documentation

Type	Nom
	EN - Fiche technique détaillée - Kit Capteur de vent à ultrasons avec câble de 1.5m
	EN - Fiche technique détaillée - Kit Capteur de vent à ultrasons avec câble de 1.5m
	EN - Guide d'installation - Kit Capteur de vent à ultrasons avec câble de 1.5m
	EN - Fiche technique détaillée - Kit Capteur de vent à ultrasons avec câble de 1.5m

Expert opinion

Pol CONIN

Digital Manager

« FT743-D-SM: ultrasonic precision for demanding marine environments »

The FT743-D-SM ultrasonic wind sensor from FT Technologies is a top choice for professional marine applications where wind data reliability and accuracy are paramount. Its utility value is particularly high for racing sailboats, large cruising yachts, and coastal or offshore weather installations, where environmental conditions are often extreme. The integration of Acu-Res® technology is a major asset, allowing the sensor to maintain constant accuracy even in the face of rapid temperature and atmospheric pressure variations—critical factors at sea.

In terms of installation, the FT743-D-SM is designed for relatively straightforward implementation. Its flat front mounting facilitates alignment, and the kit includes the 1.5m FT009 cable, optimized for this series. It is imperative to follow the installation instructions, including applying the non-silicone lubricant to the supplied O-ring and correctly tightening the mounting screws (not included) to ensure IP67 waterproofing. For lightning-prone and salt-exposed areas, consulting the product manual is essential for additional protection measures. This sensor stands out from cup or propeller anemometers by having no moving parts at all, thus eliminating mechanical failures related to wear, freezing, or debris.

This model is particularly well-suited for digital systems thanks to its RS485 interface, facilitating integration with multifunction displays (MFD) or performance computers compatible with NMEA 0183/2000 via an appropriate gateway. It excels in scenarios where continuous data availability is non-negotiable, such as on commercial vessels or autonomous weather buoys. It should be noted that for installations on very high masts or complex structures, longer cables will need to be ordered separately, as this kit includes a 1.5m cable.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

Ultrasonic wind sensor kit with 1.5m cable

2.990,83€

2.990,83€ ~~3.418,09€~~

Frequently Asked Questions

Need help? Contact us

What type of wind transducer is the FT743-D-SM KIT-1.5?

The FT743-D-SM KIT-1.5 is a kit including a digital ultrasonic wind sensor. It is designed to provide accurate and reliable measurement of wind speed and direction.

Which technology is used for wind measurement by this sensor?

This sensor integrates FT Technologies’ patented Acu-Res® technology. This technology provides automatic compensation for temperature, pressure, and humidity variations to deliver stable and accurate data.

What is the wind speed measurement range for this sensor?

The FT743-D-SM wind transducer has a wind speed measurement range from 0 to 75 m/s.

What material is the FT743-D-SM sensor housing made of?

The FT743-D-SM sensor housing is made of hard-anodized aluminum, providing excellent corrosion resistance.

What is the ingress protection (IP) rating of the FT743-D-SM sensor?

The sensor has IP67 protection when correctly installed with the supplied O-ring. This means it is protected against dust and can withstand temporary immersion in water.

Does the FT743-D-SM wind transducer contain any moving parts?

No, the FT743-D-SM has no moving parts. This design significantly reduces maintenance requirements and improves long-term reliability.

What is the operating temperature range of the sensor?

The sensor is designed to operate within an extended temperature range, from -40 °C to +85 °C.

Is the sensor equipped with an anti-icing system?

Yes, the transducer has a thermostatically controlled integrated heater. The heater is configurable from 0 to 55 °C and prevents ice formation.

What is the weight of the sensor alone (without the cable)?

The FT743-D-SM transducer alone weighs 252 grams.

What are the power supply requirements for the sensor?

The sensor is powered by a direct current (DC) voltage of 6 to 30 VDC, with a minimum current of 2A.

What is the corrosion resistance class of the sensor?

Thanks to its hard-anodized aluminum construction, the FT743-D-SM sensor offers corrosion resistance to C5-M class, making it suitable for demanding marine environments.

What are the quality and environmental certifications for FT Technologies for this product?

FT Technologies, the manufacturer of this sensor, is certified ISO 9001 for quality management and ISO 14001 for environmental management.

What is the country of origin of this wind transducer?

The FT743-D-SM wind transducer is manufactured in the United Kingdom.

What type of connectivity is used by the FT743-D-SM sensor?

The FT743-D-SM transducer uses RS485 connectivity for data transmission.

Which cable is included in the FT743-D-SM KIT-1.5 kit?

The FT743-D-SM KIT-1.5 kit includes an FT009 cable 1.5 meters long.

Is the included FT009 cable compatible with other FT Technologies sensor models?

Yes, the FT009 cable is specifically designed for use with FT Technologies FT742-SM and FT743-SM sensors.

What is the maximum nominal voltage supported by the FT009 cable?

The FT009 cable is designed to support a nominal voltage up to 30VDC and a current of 2A.

What are the first steps to install the FT743-D-SM transducer?

The initial installation steps are:

Apply non-silicone lubricant to the O-ring. Position the O-ring correctly in the sensor base. Run the cable through the mounting surface. Secure the cable to the sensor.