88B-8 — Sonde 88B8 (1kW) - 88kHz - Caoutchouc - câble 15m

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 9%

Furuno

00001502400

88B-8 — 88B8 Fishfinder (1kW) - 88kHz - Rubber - 15m Cable

The FURUNO 88B-8 transducer is a 1 kW depth sounder operating at 88 kHz, designed for non-through-hull installation in a well or tank. Its 110 mm rubber housing ensures reliable detection with an 11-degree beam.

Compatible with Furuno DFF3, FCV-1150, and FCV-295 fishfinders, it includes a 15-meter cable for direct connection. Supplied as a single unit, without a connector.

Retail priceBenefit from the professional rate

752,97€

752,97€ ~~824,17€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Detailed description

The FURUNO 88B-8 fishfinder is a 1 kW transducer designed for marine applications requiring an 88 kHz frequency. It features a rubber housing with a 110 mm diameter, suitable for installation inside the hull or in a well. This model provides an 11-degree beam, offering targeted coverage for underwater detection.

Integration and Performance

With a 1 kW output, the FURUNO 88B-8 fishfinder is compatible with various Furuno fishfinders. It can be directly wired to DFF3, FCV-1150, and FCV-295 units. It is also compatible with the FCV-1100.

Weighing 4 kg, the fishfinder comes with a 15-meter cable, without a pre-installed connector. Its non-through design simplifies installation by avoiding hull penetration while ensuring reliable detection of seabeds and underwater targets.

Expert opinion

« Technical analysis of the FURUNO 88B-8 transducer: 88 kHz frequency and internal installation »

The FURUNO 88B-8 transducer is positioned as a technical choice for users seeking an 88 kHz frequency. This frequency is often preferred for specific applications, offering a compromise between water penetration (low frequencies) and target resolution (high frequencies). Its 1 kW power makes it suitable for significant depths without reaching the capabilities of very high-power transducers.

This transducer is designed for non-through-hull installation, typically in a well or an oil-filled tank inside the hull. This installation method avoids hull perforation, minimizing the risk of water ingress and simplifying maintenance. However, it requires the hull to be made of a compatible material (fiberglass or plastic) and free of air bubbles or delaminated layers for optimal signal transmission. The absence of a preinstalled connector means manual connection to the fishfinder system, requiring wiring skills and careful attention to polarity and shielding to ensure signal integrity and compatibility with FURUNO FCV-1150, FCV-295 units, or other models via an adapter.

This model is relevant for vessels whose hulls do not allow through-hull installation or for those seeking the relative simplicity of an internal installation while benefiting from 1 kW performance at a specific frequency. It is essential to validate the hull thickness and material type to maximize the efficiency of this type of transducer.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

88B-8 — 88B8 Fishfinder (1kW) - 88kHz - Rubber - 15m Cable

752,97€

752,97€ ~~824,17€~~

Frequently Asked Questions

Need help? Contact us

What is the nominal power of the FURUNO 88B-8 depth sounder?

The FURUNO 88B-8 fishfinder has a nominal power output of 1 kW. This power allows it to reach significant depths for underwater detection.

What is the operating frequency of the 88B-8 depth sounder?

The FURUNO 88B-8 transducer operates at a single frequency of 88 kHz. This frequency provides a good balance between water penetration and target resolution.

What material is the housing of the FURUNO 88B-8 depth sounder made of?

The FURUNO 88B-8 transducer housing is made of rubber. This material is suitable for installation inside the hull or in a transducer well.

What is the length of the cable supplied with the 88B-8 transducer?

The FURUNO 88B-8 transducer is supplied with a 15-metre cable.

What is the diameter of the housing for the FURUNO 88B-8 depth sounder?

The FURUNO 88B-8 depth sounder housing has a diameter of 110 mm.

What is the beam angle of the 88B-8 depth sounder?

The FURUNO 88B-8 transducer provides a 11-degree beam angle, enabling targeted coverage for underwater detection.

What is the weight of the FURUNO 88B-8 depth sounder?

The FURUNO 88B-8 transducer weighs 4 kg.

Is the 88B-8 transducer suitable for detecting seabeds and underwater targets?

Yes, the FURUNO 88B-8 transducer’s design ensures reliable detection of seabeds and underwater targets, thanks to its 1 kW power output and 88 kHz frequency.

What type of installation is recommended for the FURUNO 88B-8 depth sounder?

The FURUNO 88B-8 transducer is designed for non-through-hull installation. It can be mounted inside the hull or in a well.

Is it necessary to drill the hull to install the 88B-8 transducer?

No, one of the advantages of the FURUNO 88B-8 transducer is its non-through-hull design, meaning it does not require drilling the boat's hull for installation.

Is the 88B-8 depth sounder transducer cable supplied with a pre-installed connector?

No, the 15-meter cable for the FURUNO 88B-8 transducer is supplied without a pre-installed connector. A connector must be added during installation.

What are the advantages of a non-through-hull installation for this transducer?

The advantages of a non-through-hull installation for the FURUNO 88B-8 transducer include simplified installation and no need to drill through the hull, which helps preserve the boat's structural integrity.

Can the 88B-8 transducer be installed in an oil tank?

Yes, the FURUNO 88B-8 transducer is designed for non-through-hull installation and can be mounted in a well or an oil tank inside the hull.

Which Furuno fishfinder models is the 88B-8 transducer compatible with?

The FURUNO 88B-8 transducer is compatible with several Furuno sounders, including the DFF3, FCV-1150, FCV-295, and FCV-1100 units.

Can the 88B-8 transducer be directly wired to the FCV-1150 and FCV-295 units?

Yes, the FURUNO 88B-8 transducer can be directly wired to Furuno FCV-1150 and FCV-295 units.

Is the 88B-8 transducer compatible with the Furuno DFF3 unit?

Yes, the FURUNO 88B-8 transducer is compatible with the Furuno DFF3 unit and can be directly wired to it.

Is the 88B-8 transducer compatible with the Furuno FCV-1100 fishfinder?

Yes, the FURUNO 88B-8 transducer is compatible with the Furuno FCV-1100 fishfinder.

Why is the 88 kHz frequency used for this depth sounder?

The 88 kHz frequency is selected for the FURUNO 88B-8 transducer as it provides an effective compromise between water penetration and target resolution, making it suitable for specific detection applications.

Is the 88B-8 probe a transducer?

Yes, the FURUNO 88B-8 is a transducer, i.e., a device that converts electrical energy into sound waves and vice versa for underwater detection.

For which applications is the 1 kW power output of the 88B-8 transducer suitable?

The 1 kW power output of the FURUNO 88B-8 depth sounder makes it suitable for significant depths, enabling effective detection of seabeds and underwater targets in various marine conditions.