Câble d'adaptation en Y, 10 broches - 10 broches - 12 broches pour FCV800 et sondes double-bande CHIRP.

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 8%

Furuno

00163615000

FRU-MJ10CCB12-30 ADAPTER CABLE — 10P-10P-12P FOR FCV800

The FURUNO FRU-MJ10CCB12-30 adapter cable is a Y-cable designed to connect dual-frequency CHIRP transducers to the FURUNO FCV-800 fishfinder.

Equipped with a 12-pin connector and two 10-pin connectors, it enables integration of 1 kW dual-band CHIRP transducers for TruEcho CHIRP™, ACCU-FISH™ functions, and bottom discrimination.

Supplied as a single unit, no accessories included.

Retail priceBenefit from the professional rate

55,82€

55,82€ ~~60,83€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Detailed description

The FURUNO FRU-MJ10CCB12-30 adapter cable is designed to optimize the capabilities of the FURUNO FCV-800 LCD Color Pulse & TruEcho CHIRP fishfinder. This Y-cable is essential for connecting dual-frequency CHIRP transducers to the FCV-800 unit, enabling full use of advanced fish detection features.

Connectivity and compatibility

This adapter cable features a specific connector configuration: one 12-pin connector and two 10-pin connectors (12-pin to 2 x 10-pin). With a length of approximately 0.3 meters, it is designed to connect dual-band 1 kW CHIRP transducers to the XDR1 and XDR2 ports of the FCV-800. Compatibility includes transducers such as B265LH-FJ12, TM265LH-FJ12, and CM265LH-FJ12.

Enhanced detection features

By enabling the use of dual-channel CHIRP transducers, the FRU-MJ10CCB12-30 cable improves target resolution and separation provided by the TruEcho CHIRP™ technology. It also supports the combination of CHIRP and traditional continuous wave (CW) transducers, activating functions such as fish size assessment (ACCU-FISH™) and bottom discrimination. These capabilities contribute to a more detailed analysis of the underwater environment.

Expert opinion

« Essential adapter for FCV-800 CHIRP dual-band transducers »

The FURUNO FRU-MJ10CCB12-30 adapter cable is a critical component for users of the FCV-800 fishfinder looking to fully exploit CHIRP technology. Its primary function is to enable the connection of dual-band 1 kW CHIRP transducers to the two dedicated ports on the FCV-800. This architecture is essential for achieving the target separation and resolution provided by the TruEcho CHIRP™ system.

Installation of this Y-cable is straightforward and integrates into an existing system. Its short length of approximately 0.3 meters indicates it is a proximity adapter designed to directly connect the transducer or an existing transducer cable to the FCV-800. It is critical to verify transducer compatibility (such as B265LH-FJ12, TM265LH-FJ12, CM265LH-FJ12) to ensure proper system operation. This cable is not a generic accessory; it is specifically configured for the FCV-800 and its dual-channel CHIRP transducers, and its selection is dictated by the transducer configuration and desired features.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

FRU-MJ10CCB12-30 ADAPTER CABLE — 10P-10P-12P FOR FCV800

55,82€

55,82€ ~~60,83€~~

Frequently Asked Questions

Need help? Contact us

What is the FURUNO FRU-MJ10CCB12-30 adapter cable?

This is a Y-adapter cable designed to connect dual-frequency CHIRP transducers to the FURUNO FCV-800 LCD Color Pulse & TruEcho CHIRP fishfinder. It is required to fully utilize the advanced fish detection features of the unit.

What are the specifications of the connectors on this cable?

This adapter cable has a specific connector configuration: one 12-pin connector on one end and two 10-pin connectors on the other, forming a Y-configuration (12-pin to 2 x 10-pin).

What is the primary function of the FRU-MJ10CCB12-30 cable?

Its primary role is to enable the connection of 1 kW dual-band CHIRP transducers to the XDR1 and XDR2 ports of the FURUNO FCV-800 sounder, thereby optimizing its underwater detection and analysis capabilities.

Is the cable designed for specific transducers?

Yes, it is specifically designed to connect CHIRP dual-band 1 kW transducers to the FCV-800 fishfinder.

Is this cable an original FURUNO product?

Yes, the FRU-MJ10CCB12-30 cable is a FURUNO product, ensuring compatibility and optimal performance with their equipment.

Which fishfinder models is this cable compatible with?

This adapter cable is compatible exclusively with the FURUNO FCV-800 LCD Color Pulse & TruEcho CHIRP fishfinder.

Which CHIRP transducers are compatible with this cable?

This cable is compatible with 1 kW dual-band CHIRP transducers, including models B265LH-FJ12, TM265LH-FJ12, and CM265LH-FJ12.

Can this cable be used with other FURUNO fishfinder models besides the FCV-800?

The FRU-MJ10CCB12-30 cable is specifically designed for the FURUNO FCV-800 fishfinder. Compatibility with other models is not guaranteed and is not recommended to ensure correct operation.

Does this cable support traditional continuous wave (CW) fishfinder transducers?

Yes, by allowing the combination of CHIRP and traditional continuous wave (CW) transducers, this cable enables advanced functions such as fish size estimation (ACCU-FISH™) and bottom discrimination.

Is it possible to connect a single CHIRP transducer with this cable?

The cable is a Y-adapter (12-pin to 2 x 10-pin) designed to connect dual-frequency transducers to the XDR1 and XDR2 ports of the FCV-800. It is optimized for dual-transducer setups to fully utilize the fishfinder's capabilities.

Which FCV-800 ports should this cable be connected to?

This cable is designed to connect CHIRP dual-band transducers to the XDR1 and XDR2 ports of the FURUNO FCV-800 sounder.

Is there a specific wiring direction for the 10-pin connectors?

Ports XDR1 and XDR2 on the FCV-800 are dedicated to transducers. Refer to the FCV-800 and transducer user manuals to ensure correct connection of the two 10-pin connectors to their respective ports.

Which FCV-800 features are improved by this cable?

This cable improves the resolution and target separation provided by the TruEcho CHIRP™ technology. It also enables features such as fish size assessment (ACCU-FISH™) and bottom discrimination, offering a more detailed analysis of the underwater environment.

Is the FRU-MJ10CCB12-30 cable required for all transducers with the FCV-800?

This cable is specifically designed for connecting CHIRP dual-frequency 1 kW transducers to the FCV-800. If you are using this type of compatible transducer, this cable is required for optimal performance and access to advanced features.

Is this cable compatible with CHIRP transducers of different power ratings (e.g., 600W or 3kW)?

The cable is designed to connect CHIRP dual-band 1 kW transducers to the XDR1 and XDR2 ports of the FCV-800. Compatibility with transducers of different power ratings is not specified and may not provide optimal performance or be incompatible.