GP340/NMEA2000 — NMEA0183 EQUIPPED CABLE 6M for GP340

This cable is designed to allow the Furuno GP340 GNSS receiver to transmit its positioning data via the NMEA0183 protocol. It is required when the integration of the GP340 specifically requires this protocol.

The length of this cable is 6 metres, which is approximately 19.7 feet.

This cable uses the NMEA0183 communication protocol. It is specifically designed to provide an NMEA0183 output for the Furuno GP340 receiver.

This cable ensures reliable data transmission at a fixed baud rate of 38.4k.

The SKU for this cable is GP3-400-183-06.

Yes, this cable is a Furuno product, designed specifically for their GNSS receiver GP340.

The GP3-400-183-06 cable is configured with a white and blue twisted pair for data transmission.

No, this NMEA 0183 cable is not supplied as standard with the GP340 receiver. It is designed to replace the standard NMEA 2000 cable when the NMEA 0183 protocol is required.

Yes, this NMEA 0183 cable is used as a replacement for the standard NMEA 2000 cable that is typically supplied with the Furuno GP340 receiver.

This cable is recommended for installations where the Furuno GP340 receiver must be integrated into navigation systems or equipment that operate exclusively with the NMEA0183 protocol.

This cable is specifically designed and compatible with the Furuno GP340 GNSS receiver.

No, this cable is specifically designed for the Furuno GP340 receiver and is not guaranteed to be compatible with other GNSS receiver models or brands.

No, the GP340 receiver can output either NMEA 2000 or NMEA 0183 data, but not both formats simultaneously. This dedicated cable is required for NMEA 0183 output.

This cable transmits positioning data from the GP340. The GP340 receiver itself is compatible with GPS (L1/L5) and GLONASS (L1) constellations.

Yes, the GP340 receiver is compatible with the Galileo (E1/E5), QZSS (L1/L5), and Beidou (B1/B2) constellations. This cable allows the transmission of data from these systems.

This cable transmits data from the GP340 receiver. The GP340 is compatible with SBAS augmentation systems such as WAAS, EGNOS, MSAS, and GAGAN.

This NMEA 0183 cable is required when the navigation system or equipment to which the GP340 is to be connected only supports the NMEA 0183 protocol, or if a specific integration with this protocol is needed.

During installation, ensure NMEA0183 connections are properly made, following twisted pairs and polarity where applicable, to guarantee reliable data transmission.

This is a pre-assembled cable, meaning it is ready to be connected directly to a Furuno GP340 receiver on one end and to NMEA 0183 equipment on the other, using the appropriate connectors.

The term "pre-terminated cable" means the cable is supplied with the required connectors already installed, making it ready for direct connection between the GP340 receiver and a compatible NMEA 0183 system.