NMEA2000 MICRO5C M/F Cable Certified L=1m

This Furuno NMEA2000 MICRO5C M/F cable, certified L=1m, is designed to reliably interconnect marine electronic equipment within an NMEA2000 network. It enables stable data transmission between various devices such as depth sounders, chartplotters, navigation instruments, engines, sensors, and GPS receivers.

This NMEA 2000 cable is 1 meter long.

This cable is fitted with 5-pin Micro-C connectors, configured as male to female (M/F). These connectors comply with the NMEA2000 standard.

Yes, this cable is NMEA2000 certified. This certification confirms compliance with industry standards for extended compatibility and reliable performance within NMEA2000 networks.

CAN (Controller Area Network) technology is a robust and reliable communication protocol, particularly well-suited to electrically noisy environments such as those found aboard vessels. NMEA 2000 is based on this technology, enabling efficient and secure communication between devices on the network.

Yes, this NMEA 2000 cable is specifically designed for marine networks. Its compliance with NMEA 2000 physical and protocol standards makes it suitable for demanding environments aboard boats.

Yes, an NMEA 2000 network, and by extension its cables, is designed to carry both communication data and the electrical power required by connected devices, simplifying onboard wiring.

Yes, this 1-meter NMEA 2000 cable can be used as a drop cable. A drop cable is used to connect an individual device to the main backbone of the NMEA 2000 network.

"MICRO5C" refers to the type of connector used. It is a Micro-C size connector, which is one of the standard sizes for NMEA 2000 connectors, and it has 5 pins.

NMEA 2000 cables and connectors are designed to be robust and withstand marine conditions, including some resistance to moisture and weather. However, it is always recommended to ensure that connections are tight and protected to guarantee the system's longevity.

Yes, being NMEA2000 certified, this cable is designed to be compatible with all equipment and systems compliant with the NMEA2000 standard, regardless of brand. It can therefore be used to connect devices from other manufacturers within an existing NMEA2000 network.

No, this cable is specifically designed for the NMEA2000 standard. The NMEA0183 and NMEA2000 standards differ and require separate cables and connectors. To connect an NMEA0183 device to an NMEA2000 network, a protocol converter is needed, not a simple cable.

Yes, thanks to its NMEA2000 certification and standard Micro-C connectors, this cable is fully compatible with existing NMEA2000 networks. It can be used to extend or maintain an onboard network.

Micro-C and Mini-C connectors are two different sizes of connectors used in NMEA 2000 networks. Micro-C connectors (such as those on this cable) are smaller and are typically used for drop cables and individual devices. Mini-C connectors are larger and are often used for backbone cables in larger networks requiring higher current capacity.

This cable can be used to connect a wide range of NMEA 2000 compatible marine devices, such as fishfinders, chartplotters, navigation instruments (wind transducers/vane anemometers, speed logs, GPS), engines, tank level sensors, radars, and autopilots.

Yes, as a certified NMEA2000 cable with standard Micro-C connectors, it is compatible with all systems and devices that comply with the NMEA2000 standard. The certification ensures interoperability.

To check compatibility of a device with NMEA 2000, consult its technical documentation or the manufacturer’s specifications. Look for the "NMEA 2000 certified" marking or a NMEA 2000 connection port (typically a Micro-C or Mini-C connector).

This cable is connected by plugging the male end (M) into a female NMEA 2000 port (for example, on a T-connector or a device) and the female end (F) into a male NMEA 2000 port (on a device or another cable). It is typically used as a drop cable to connect a device to the network’s backbone.

No, a 1-meter cable is too short to serve as a backbone cable in an NMEA 2000 network. Backbone cables must be long enough to span most of the boat and are typically more robust cables. This cable is designed to be a drop cable, connecting a device to the backbone.

No, installing this NMEA 2000 cable generally does not require specific tools. Micro-C connectors are designed to be screwed and unscrewed by hand, ensuring a secure and watertight connection.