NMEA2000 Cable MICRO5C M/NU Certified L=1m

This is an NMEA 2000-certified cable designed for marine network connectivity. The term "Micro5C" refers to its Micro-type connector (5 pins), "M" indicates a male connector on one end, and "NU" means the other end consists of bare wires, allowing direct and custom connection to specific devices.

This NMEA 2000 Micro5C M/NU cable has a length of one meter (1m).

This cable is fitted with a Micro5C male connector at one end and bare wires at the other, allowing for custom connections.

Bare wires allow direct and custom connection of sensors or specific devices to the NMEA 2000 bus, particularly those without a standard NMEA 2000 connector.

Yes, this cable is designed for marine environments. Its TPE jacket provides resistance to UV, oil, and abrasion. Additionally, its terminations are rated IP67, offering protection against corrosion and temporary immersion.

Yes, this cable is an NMEA 2000 certified component, ensuring compliance with marine network communication standards.

This NMEA 2000 cable supports network speeds up to 250 kbps, which is standard for NMEA 2000 networks.

The current-carrying capacity of this cable is designed for low-power applications, typically up to 1A, with some configurations supporting up to 3A.

This cable is compatible with 9 to 16V networks and is optimized for 12V marine systems.

The jacket of this cable is made of TPE (thermoplastic elastomer), giving it resistance to UV, oil, and abrasion, ensuring durability in marine environments.

The end with the Micro5C male connector plugs into a standard female NMEA 2000 port. The end with the bare wires must be connected to the corresponding terminals of the device to be connected, following the specific wiring diagrams of that device for NMEA 2000 power and data.

Yes, its 1 m length is particularly suited to short runs and confined spaces, helping to optimize onboard wiring management.

The cable terminations are rated IP67, protecting them against corrosion in areas exposed to spray. For the bare-wire end, ensure the connection is made securely and protected from moisture and interference, following the connected device manufacturer's recommendations.

This cable features a double-shielded twisted-pair construction. The shielding minimizes electromagnetic interference (EMI), ensuring reliable and stable data transmission on the NMEA 2000 network.

This cable is designed to integrate with Furuno marine electronics systems, including the NavNet and GP series, as well as other Furuno equipment certified for NMEA 2000.

Yes, this cable is compatible with NMEA 2000-certified equipment from other manufacturers such as Garmin, Raymarine, Simrad, and Lowrance, provided they use the NMEA 2000 standard and require a bare-wire connection.

This cable is primarily designed for direct connection of a specific device to the NMEA 2000 bus via its bare wires. For network extension, cables with two standard NMEA 2000 connectors are typically used, but this cable can be integrated if the extension involves connecting a device with bare-wire terminals.

Yes, this cable is optimized for 12 V marine systems and is compatible with a voltage range of 9 to 16 V, making it suitable for most standard nautical installations.

Its one-meter length is ideal for direct and short connections, helping to reduce excess cabling and maintain a clean, organized installation, especially in tight spaces.

The Micro5C male connector allows you to plug the cable directly into a standard female port of an existing NMEA 2000 network or a compatible device, ensuring a secure and standards-compliant connection.