FURUNO FRU-2P5S-FF-15M-A - Câble radar Ethernet et alimentation 15 m

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 9%

Furuno

00151262000

FRU-2P5S-FF-15M-A - 15 m Radar Ethernet and Power Cable

The FURUNO FRU-2P5S-FF-15M-A 15-metre cable provides simultaneous power and Ethernet connection for your radar systems. Designed for optimal integration with DRS radars and NavNet 3D displays, it simplifies installation aboard. This cable is compatible with models RDP-157 (MODEL1815), DRS4DL+, DRS4DNXT, DRS6ANXT, DRS12A-NXT, DRS25A-NXT, DRS6A_XCLASS, DRS12A-XCLASS and DRS25A-XCLASS.

Retail priceBenefit from the professional rate

135,91€

135,91€ ~~149,17€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Detailed description

The FURUNO FRU-2P5S-FF-15M-A 15-meter cable is an integrated solution for connecting marine radar systems. It combines power supply and Ethernet data transmission within a single cable, simplifying installation and cable management on board.

Compatibility and Integration

This cable is specifically designed for optimal compatibility with a wide range of Furuno radar systems. It supports DRS (Digital Radar Sensor) radar sensors as well as NavNet 3D multi-station displays. Compatible models include the Multiposte RDP-157 (MODEL1815), and the DRS4DL+, DRS4DNXT, DRS6ANXT, DRS12A-NXT, DRS25A-NXT, DRS6A_XCLASS, DRS12A-XCLASS, and DRS25A-XCLASS radar units.

Technical Design

FURUNO’s FRU-2P5S-FF-15M-A cable is a "siamese" type cable, integrating both data and power lines. The data section (Ethernet) is fitted with RJ45 connectors at both ends for standardized network connections. The power section uses a 3-pin connector for the display unit, while the end intended for the radar sensor (DRS) is typically supplied without a connector, allowing for custom termination based on installation requirements. Manufactured with materials suited for marine environments, this cable is designed to withstand demanding offshore conditions.

Expert opinion

« Radar Furuno wiring integration and reliability »

This FURUNO FRU-2P5S-FF-15M-A cable is a critical component for the integrity of your radar system. Its "twin-ax" design integrating power and Ethernet provides a major strategic advantage, as it reduces the number of cables to route, simplifying installation and minimizing potential failure points. For installations where the radar sensor is far from the multifunction display, the 15-meter length offers valuable flexibility, avoiding suboptimal extensions. It is crucial to select the correct cable length from the start to prevent any signal or power loss, and this 15m model is a good compromise for many vessels. The power cable end intended for the DRS lacks a connector, so careful and watertight termination is essential to ensure long-term power reliability—a detail not to be overlooked during installation.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

FRU-2P5S-FF-15M-A - 15 m Radar Ethernet and Power Cable

135,91€

135,91€ ~~149,17€~~

Frequently Asked Questions

Need help? Contact us

What is the exact length of this Furuno cable?

The length of this cable is 15 meters.

Does this cable combine power and data?

Yes, this is a so-called "dual" cable that integrates both the power supply lines and Ethernet data transmission within a single sheath.

What is the main advantage of a combined radar Ethernet/power cable?

The main advantage is simplified installation and cable management aboard. By combining power and data functions into a single cable, it reduces clutter and makes routing easier.

Is this cable designed to withstand a marine environment?

Yes, this cable is made with materials specifically suited to a marine environment. It is designed to withstand demanding conditions encountered at sea, such as humidity and temperature variations.

What is the part number or model number of this Furuno cable?

The exact reference for this cable is FRU-2P5S-FF-15M-A.

Is this an authentic Furuno product?

Yes, this cable is an original and authentic Furuno product, designed to ensure optimal compatibility and performance with their systems.

Is the cable of the "siamese" type?

Yes, this cable is of the "coax" type, meaning it integrates the Ethernet data lines and the electrical power lines within a single sheath, providing an integrated wiring solution.

Which Furuno radar systems is this cable compatible with?

This cable is specifically designed for Furuno DRS (Digital Radar Sensor) radar sensors and NavNet 3D multi-station displays.

Does this cable work with the Multipost RDP-157 (MODEL1815)?

Yes, this cable is specifically designed for optimal compatibility with the Multiposte RDP-157 (MODEL1815).

Is this cable compatible with DRS4DL+ radar transducers?

Yes, the FRU-2P5S-FF-15M-A cable is compatible with the DRS4DL+ radar sensors.

Can I use it with DRS-NXT radar models such as DRS6A-NXT and DRS12A-NXT?

Yes, this cable is compatible with DRS-NXT radar units, including DRS4DNXT, DRS6ANXT, DRS12A-NXT, and DRS25A-NXT models.

Is it compatible with XCLASS radar series such as the DRS6A_XCLASS?

Yes, this cable supports XCLASS radar series such as DRS6A_XCLASS, DRS12A-XCLASS, and DRS25A-XCLASS.

Can this cable be used with radar equipment from brands other than Furuno?

No, this cable is specifically designed to ensure optimal compatibility with the radar systems and Furuno displays mentioned. It is not guaranteed to work correctly with equipment from other brands.

What types of connectors are present on this combined cable?

The data (Ethernet) portion of the cable is fitted with RJ45 connectors at both ends. The power section has a 3-pin connector for the display unit.

Is the end of the cable intended for the radar sensor pre-connected?

No, the end of the cable intended for the radar sensor (DRS) is usually supplied without a connector. This allows for on-site custom termination according to the specific requirements of the installation and sensor.

Does installing this cable require specific skills?

Ethernet installation with RJ45 connectors is standard. However, custom termination of the power end on the radar sensor side may require marine electrical wiring skills to ensure a secure, watertight, and standards-compliant connection.

How is the power supply connected to the display unit?

The power section of the cable connects to the display unit via a 3-pin specific connector, designed for compatible Furuno systems.

Are special tools required to connect the cable end to the radar sensor?

Yes, custom termination of the radar sensor-side cable end requires specific tools for electrical wiring, wire preparation (stripping, crimping) and installation of suitable connectors.

Is the cable shielded to prevent interference?

The cable is designed for marine radar systems and includes Ethernet data lines. It is typically constructed with adequate shielding to minimize electromagnetic interference and ensure reliable data transmission in a marine environment.

Are there any special precautions to take when routing this cable?

During routing, it is recommended to follow marine installation best practices. This includes avoiding tight bend radii, protecting the cable from chafing and cuts, and securing it firmly to prevent excessive movement that could damage it.