FURUNO FRU-NMEA-PMMFF-060 NMEA2000 Micro5C straight cable 5 pins M/F - 6m

This is a Furuno NMEA 2000 cable, specifically designed to connect and integrate various marine electronic devices within an NMEA 2000 network. It is identified by the part number FRU-NMEA-PMMFF-060.

This NMEA 2000 cable is 6 meters long. This length also corresponds to the maximum recommended length for a drop cable in an NMEA 2000 network, ensuring stable communication.

The cable is fitted with straight 5-pin Micro5C connectors, with a Male/Female (M/F) configuration. This means it has one male end and one female end to facilitate connections in an NMEA 2000 network.

Yes, the FRU-NMEA-PMMFF-060 cable includes overall shielding and a drain wire. This design is intended to ensure reliable data transmission while minimizing electromagnetic interference in the marine environment.

This NMEA 2000 cable is designed to handle a maximum nominal current of 4 amperes (4A). This capacity meets the power requirements of NMEA 2000 networks for navigation and sensors.

The FRU-NMEA-PMMFF-060 cable is built with five conductors. It includes twisted pairs dedicated to data transmission and power supply, supplemented by overall shielding and a drain wire for optimal performance.

This cable is compatible with NMEA 2000 networks operating at a voltage of 9 to 16 volts (V). It is designed to carry power and data within this standard marine system voltage range.

Yes, this cable uses Micro5C connectors. This is a standardized connector format for NMEA 2000 networks, characterized by its small size and 5 pins.

This NMEA 2000 cable is manufactured by FURUNO, a recognized supplier of marine electronic equipment.

Yes, the design of this cable, with its five-wire construction including twisted pairs and overall shielding, is specifically intended to ensure reliable and robust data transmission in demanding marine environments.

This cable is designed to facilitate the connection of various Furuno electronic devices compatible with NMEA 2000, such as transducers, navigation displays, and the SCX-20 satellite compass, within an NMEA 2000 network.

Yes, this cable is equipped with straight Male/Female (M/F) Micro5C connectors, ensuring full compatibility with the NMEA 2000 standard. It can be integrated into any compliant NMEA 2000 network.

Yes, as long as other brands' devices are also compatible with the NMEA 2000 standard and use Micro5C 5-pin connectors, this cable can be used to interconnect them to the network. The NMEA 2000 standard is designed for interoperability between different manufacturers.

Yes, this cable can be used to extend an existing NMEA 2000 network. It can serve as a drop cable to connect a new device to the backbone, or as a backbone segment if the network specifications allow it and the total backbone length remains within recommended limits.

A male connector (M) has pins that insert into the sockets of a female connector (F). This M/F cable has one male end and one female end, allowing direct connection between two components or extension of a cable segment.

This cable can be integrated in two main ways into an NMEA 2000 network:

As a drop cable: It connects a device (such as a display or sensor) to the main backbone of the network. Its 6-metre length is the maximum recommended length for this use.

As a backbone segment: It can also be used to extend the length of the network’s main backbone cable, by connecting to other backbone segments or T-connectors.

Yes, the maximum recommended length for a drop cable in an NMEA 2000 network is 6 meters. This FRU-NMEA-PMMFF-060 cable complies with this recommendation with its 6-meter length, ensuring stable communication for connected devices.

The FRU-NMEA-PMMFF-060 cable is a connection cable and does not replace terminations. NMEA 2000 terminations are 120-ohm resistors that must be installed at both physical ends of the NMEA 2000 backbone to ensure proper operation. This cable connects to it via a T-connector or another cable segment.

Yes, this cable is designed to carry both data and power within the NMEA 2000 network. Its five-wire construction includes twisted pairs for power, and it supports a maximum current of 4A, which is sufficient to power most NMEA 2000 sensors and small devices.