200B-5S — Depth Sounder 200B-5S (1kW) - 200kHz - Rubber - 10m Cable

The FURUNO 200B-5S transducer has a power output of 1 kW (1000 Watts), providing robust detection performance for a variety of marine applications.

This transducer operates at a single frequency of 200 kHz. This frequency is ideal for detailed fish-finding and good seabed resolution in mid-depth waters.

The FURUNO 200B-5S transducer is made of rubber. This material is selected for its resilience, shock and vibration absorption, and durability in the marine environment.

The transducer is supplied with a 10-metre cable. This cable has bare wires, providing flexibility for connection to onboard electronic equipment.

The FURUNO 200B-5S transducer weighs approximately 2.5 kg. This weight is manageable for a single-person installation and contributes to the transducer's stability once mounted.

The 200B-5S transducer emits a narrow beam with a 8.5-degree angle. This concentrated beam is optimized for precise and detailed observation of underwater targets, such as fish schools.

The FURUNO 200B-5S transducer is designed for detailed fish detection and precise observation of fish schools. Its 200 kHz frequency and narrow beam make it particularly effective for these applications.

The 200 kHz frequency of the 200B-5S transducer is generally better suited to mid-depths and detecting targets near the surface or bottom at these depths. For deep-sea fishing, dual-frequency transducers or lower frequencies (e.g., 50 kHz) are often preferable.

A non-through-hull transducer like the 200B-5S greatly simplifies installation because it does not require drilling through the boat hull. It can be mounted inside the hull, in a water-filled locker or tank, which reduces the risk of leaks and hull work.

The 200B-5S transducer is a non-through-hull type. It is designed to be installed inside the boat’s hull, in a locker, a compartment, or a liquid-filled tank, without direct contact with the external water.

No, it is not necessary to drill through the hull to install the 200B-5S transducer. As a non-through-hull transducer, it is designed to be mounted inside the hull, simplifying the installation process and preserving the hull's structural integrity.

The 200B-5S transducer is compatible with Furuno fishfinders that accept a 1 kW transducer and operate at a frequency of 200 kHz. It is recommended to check your Furuno fishfinder’s specifications to confirm connector compatibility and power requirements.

The 200B-5S transducer is supplied with a 10-metre bare-wire cable. This means a connector specific to your Furuno fishfinder model must be added, or the wires must be wired directly to a compatible terminal block on the device.

Although the 200B-5S transducer is primarily designed for Furuno systems, it is technically possible to use it with sounders from other brands if they accept a 1 kW, 200 kHz transducer and you can adapt the wiring and connector. However, optimal performance is typically achieved with equipment from the same manufacturer.

Yes, the 200B-5S transducer can be connected to compatible multifunction displays (MFDs), provided the MFD is equipped with an integrated or external fishfinder module that supports a 1 kW, 200 kHz transducer and the wiring is correctly adapted.

Yes, the FURUNO 200B-5S transducer is covered by the manufacturer’s standard warranty. For specific details regarding warranty duration and conditions, refer to the documentation provided with the product or contact customer service.

Yes, the FURUNO 200B-5S transducer is generally supplied with an installation manual or detailed instructions. This document provides essential information on mounting, wiring, and precautions for correct installation.