00164700000 — 5m LAN Cable - WATERPROOF - non WATERPROOF

This Furuno LAN cable is 5 meters long, making it suitable for wiring runs on mid-sized vessels.

Yes, this cable is specifically designed for marine environments. It features a waterproof male RJ45 connector rated IPX6/IPX7 at one end, making it ideal for exposed areas such as the deck.

The cable has two male RJ45 connectors. One end is a waterproof connector certified IPX6/IPX7 for wet areas, and the other end is a standard RJ45 connector for connections in the console or dry areas.

This cable supports 10/100/1000Base-T Ethernet, allowing data transfer rates up to 1 Gbps (Gigabit per second).

Yes, this cable includes EMI (Electromagnetic Interference) shielding to ensure signal integrity and minimize interference, which is critical in a marine environment.

This cable is designed to operate reliably in a temperature range from -15°C to 55°C, making it suitable for various marine weather conditions.

The cable uses Cat5e/6 wiring, ensuring efficient data transmission for high-bandwidth marine applications.

The cable uses a T568B "straight-through" pinout, which is standard for direct connections between network devices and ensures full-duplex operation.

Yes, thanks to its 10/100/1000Base-T Ethernet support and 1 Gbps throughput, this cable is perfectly suited to handle demanding functions such as radar overlays, AIS targets, and video streams on compatible marine systems.

The product is the 5-meter LAN cable itself. Installation-specific accessories such as cable glands or tools are not included and must be purchased separately if required.

When installing the watertight connector, ensure the connection is clean and dry. Tighten the watertight connector's locking mechanism firmly to maintain optimal sealing in accordance with IPX6/IPX7 certifications. Always refer to your Furuno equipment's installation manual for specific instructions.

Cutting this cable to adjust its length is not recommended. It is pre-assembled with specific connectors, including a waterproof one, and any modification could compromise its integrity, waterproofing, and data transmission performance.

Yes, during routing, avoid bending the cable at sharp angles to prevent damage to the internal conductors and shielding. Protect it from excessive chafing and direct heat sources. Use appropriate fasteners to secure it in place and prevent snagging or jamming.

No, connecting this cable to Furuno equipment is typically done by simply plugging in the RJ45 connectors. No specific tools are required to connect the cable itself, though tools may be needed for the physical installation of the cable on the vessel (e.g., to route the cable through bulkheads).

This cable is compatible with Furuno NavNet TZtouch3, TZT3 and NavNet systems. It enables the integration of various equipment such as chartplotters, radars, depth sounders and cameras within these networks.

Although this cable is optimized and designed for Furuno marine networks and their specific requirements (notably the waterproof connector), it features a standard RJ45 connector. It could technically connect to other equipment with an RJ45 Ethernet port, but its full functionality and waterproofing are guaranteed only with compatible Furuno systems.

No, this cable is an Ethernet LAN (Local Area Network) cable and is not compatible with NMEA 2000 networks. NMEA 2000 is a different communication protocol, using specific cables and connectors.

Yes, if your Furuno system has a compatible Ethernet LAN port and the laptop or PC is configured to communicate with the Furuno network, this cable can be used to establish the connection. The standard connector fits Ethernet ports on computers.

The available information does not specify the compatibility of this cable with Power over Ethernet (PoE) applications. It is designed for Ethernet data transmission up to 1 Gbps. For PoE requirements, it is recommended to check the specifications of the relevant Furuno equipment and consult the specific PoE technical documentation if necessary.