50ST2024V — Linear assemblies for mechanical steering systems

The FURUNO 50ST2024V is a single-rod hydraulic linear actuator designed specifically for mechanical steering systems on sailboats.

The primary function of the 50ST2024V is to provide the mechanical actuation required for integrating an autopilot on sailboats equipped with mechanical steering systems. It operates on the tiller to maintain the heading set by the autopilot.

The FURUNO 50ST2024V linear actuator operates on 24VDC power supply.

The FURUNO 50ST2024V linear actuator is capable of developing a thrust of 700 kg.

The stroke length of the FURUNO 50ST2024V linear actuator is 300 mm, allowing it to accommodate helm movements.

The 50ST2024V actuator is designed to support a maximum torque of 200 mkg.

The FURUNO 50ST2024V is a single-rod hydraulic linear actuator. In the context of autopilots, it is typically designed for double-acting operation, allowing it to push and pull the rudder.

No, the FURUNO 50ST2024V is a hydraulic linear actuator, which is a key component of an autopilot system. It must be connected to an autopilot control unit and a hydraulic pump to function as a complete system.

The 50ST2024V linear actuator is specifically designed for sailboats equipped with mechanical steering systems, where it assists in the movement of the helm.

The FURUNO 50ST2024V linear actuator is suitable for sailboats over 44 feet.

No, the FURUNO 50ST2024V linear actuator is specifically designed to operate with a 24VDC power supply. It cannot be used directly with a 12V electrical system without an appropriate voltage converter, which is not included.

Yes, as a hydraulic linear actuator, the 50ST2024V requires an external hydraulic pump to generate the pressure needed for operation. This pump is typically controlled by the autopilot unit.

Installing the 50ST2024V linear actuator requires several types of connections:

Mechanical: Mounting to the tiller quadrant or rudder stock. Hydraulic: Connection to the hydraulic lines of an external pump. Electrical: Connection to the 24VDC power supply and the autopilot control unit.

Yes, installing the 50ST2024V cylinder is a technical operation requiring skills in marine mechanics, hydraulics, and electrical systems. It is strongly recommended to use a qualified professional to ensure correct and safe installation.

The 50ST2024V linear actuator must be installed in the rudder compartment, immediately adjacent to the rudder stock or quadrant. Particular attention must be paid to alignment, stroke clearance, and the strength of mounting points to ensure optimal and unrestricted operation.

A "linear drive for mechanical steering" refers to a device, such as the FURUNO 50ST2024V, designed to be integrated into an existing mechanical steering system on a boat. Its purpose is to provide the necessary force to move the tiller under the control of an autopilot without altering the manual operation of the steering.

Hydraulic cylinders offer several advantages for autopilots, including:

High thrust force, suitable for large rudders and challenging conditions.Precise control, enabling stable course-keeping.Robustness and increased durability due to the nature of hydraulic systems.Smooth integration with existing mechanical steering systems.

The FURUNO 50ST2024V is specifically designed for sailboats equipped with mechanical steering systems. While the operating principle may appear similar, torque requirements and steering interfaces often differ for powerboats. It is recommended to verify compatibility with an expert for use on a powerboat.