OP02-89 flush-mount kit — FCV600

The FURUNO OP02-89 flush-mount kit is specifically designed for integrating the FURUNO FCV600 fishfinder. It is not compatible with other display or fishfinder models.

The primary function of this kit is to enable a flush-mounted installation of the FURUNO FCV600 fishfinder screen on a dashboard. This provides a discreet and professional finish to your navigation station.

Installation is performed from the rear of the dashboard. The kit is designed to facilitate flush integration of the FCV600, ensuring the unit fits seamlessly into the dashboard surface.

Using this kit for a flush-mounted installation offers several advantages:

A clean, discreet finish that integrates seamlessly with the navigation station. Enhanced protection of the device against shocks and vibrations while sailing. Improved ergonomics and safety by reducing protruding elements on the dashboard.

No, the FURUNO OP02-89 kit is only a mounting accessory. It is designed to be used with the FURUNO FCV600 fishfinder, which must be purchased separately.

No, this kit is an original part specific to the FURUNO brand and is exclusively designed for the FCV600 fishfinder model. It is not compatible with fishfinders from other brands.

No, flush-mounting does not compromise the FCV600’s waterproofing. The FCV600 fishfinder has its own IP56-rated waterproofing, ensuring resistance to water spray and dust, even when installed with the kit.

The OP02-89 kit is designed for the FURUNO FCV600 fishfinder, which features a 5.7-inch color LCD screen with a resolution of 640 x 480 pixels. The FCV600 dimensions (with bracket) are 210 (W) x 198 (H) x 120 (D) mm.

Yes, the OP02-89 kit is an official FURUNO accessory, ensuring compatibility and optimal quality with the FCV600 fishfinder.

The kit is suitable for any boat with a dashboard where a cutout can be made for the FCV600 fishfinder installation. It is designed for standard marine installation.

Furuno mounting kits are usually supplied with a detailed installation guide provided by the manufacturer. It is recommended to consult this manual for specific instructions and required cutting templates.

The reference number (SKU) for this mounting kit is 00163823000.

Yes, by allowing a flush-mounted installation, the OP02-89 kit helps better protect the FCV600 from physical shocks and vibrations. The screen is less exposed than with a bracket mount, but the FCV600’s inherent waterproofing (IP56) remains its primary protection against water.

No, the OP02-89 kit is designed exclusively for flush mounting. If you need a bracket mount, the FCV600 is typically supplied with its own standard mounting bracket, or a different accessory would be required.

The OP02-89 kit is not strictly required for FCV600 operation, which can be mounted on a bracket. However, it is essential if you want a flush-mount installation integrated into your dashboard.

The FCV600 fishfinder, for which this kit is designed, supports TruEcho CHIRP™ and CW (50/200 kHz) technologies for high-performance underwater detection. It also offers features such as ACCU-FISH™ and bottom discrimination.

The FCV600 fishfinder requires a 12–24 VDC power supply. The mounting kit itself has no power requirements, but it is critical that the FCV600 be properly powered after installation.

Absolutely. One of the main advantages of the OP02-89 kit is to allow seamless and aesthetic integration of the FCV600 into the dashboard. The unit is flush-mounted, which gives your navigation station a cleaner and more modern appearance.