Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 9%

Furuno

00150681000

OP20-50 Retrofit Kit SC30-SC33

Name: OP20-50 Retrofit Kit SC30-SC33
Brand: Furuno
SKU: 00150681000
Price: 189.64 EUR
Availability: InStock

Designed to simplify the upgrade, the FURUNO OP20-50 retrofit kit allows converting the existing wiring of an SC-30 satellite compass for installation of an SC-33. This solution optimizes integration by preserving the wiring infrastructure while benefiting from the improved performance of the SC-33, including its 0.4° rms heading accuracy and multi-GNSS compatibility. Supplied with 1 x Antenna (antenna cable not included); 1 x Display; 1 x Junction box; 1 x Installation hardware.

Retail priceBenefit from the professional rate

189,64€

189,64€ ~~207,50€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Detailed description

The FURUNO OP20-50 retrofit kit is a solution designed to simplify the migration of satellite compass installations. It converts the existing wiring of a FURUNO SC-30 system to ensure compatibility with the SC-33 satellite compass. This approach reduces complexity and costs associated with a full wiring replacement during an upgrade.

Performance improvements with the SC-33

By enabling the installation of the SC-33 satellite compass, this kit provides access to improved technical specifications. The SC-33 offers a heading accuracy of 0.4° rms and a resolution of 0.1°, compared to 1.0° rms for the SC-30. Roll and pitch accuracy is also 0.4° rms. The SC-33 stabilization time is approximately 90 seconds, an improvement over the SC-30’s 3 minutes.

Connectivity and compatibility

The SC-33 integrates multi-GNSS support, compatible with GPS, Galileo, GLONASS, and QZSS satellite networks, ensuring precise GNSS positioning (approximately 5m 2DRMS). It features a certified NMEA2000® interface, with an NMEA0183 option via the IF-NMEASC unit. Output data includes GNSS position, SOG, COG, ROT, heave, roll, pitch, and heading. The SC-33 system is compatible with NavNet TZtouch and NavNet TZtouch2 series, as well as TIMEZERO software, and allows menu access via NavPilot 300, TZT, or TZT2. The OP20-50 retrofit kit is powered by 12-24V DC, and components are designed for marine use.

Payment and security

Your payment information and data are processed securely.

OP20-50 Retrofit Kit SC30-SC33

189,64€

189,64€ ~~207,50€~~

Frequently Asked Questions

Need help? Contact us

What is the primary purpose of the FURUNO OP20-50 kit?

The FURUNO OP20-50 kit is a retrofit solution designed to simplify the migration of satellite compass installations. It allows converting the existing wiring of a FURUNO SC-30 system to make it compatible with the SC-33 satellite compass.

What are the key benefits of using this retrofit kit?

Using this kit reduces complexity and costs associated with a full wiring replacement when upgrading from an SC-30 to an SC-33 system, by allowing reuse of the existing wiring.

What is the heading accuracy of the SC-33 when used with this kit?

The SC-33 satellite compass, once installed using this kit, provides a heading accuracy of 0.4° rms and a resolution of 0.1°.

What is the stabilization time of the SC-33 compass?

The stabilization time for the SC-33 satellite compass is approximately 90 seconds.

What types of data can the SC-33 output?

The SC-33 can output various data, including GNSS position, SOG (Speed Over Ground), COG (Course Over Ground), ROT (Rate Of Turn), heave, roll, pitch, and heading.

What is the GNSS position accuracy of the SC-33?

The SC-33 provides a GNSS position accuracy of approximately 5m 2DRMS.

What is the required power supply for the OP20-50 kit and the SC-33 system?

The OP20-50 retrofit kit and the SC-33 system are designed to be powered by 12-24V DC.

Is the OP20-50 kit designed for a marine environment?

Yes, the components in the OP20-50 retrofit kit are specifically designed for marine use.

Which satellite compass models is this retrofit kit compatible with?

This kit is compatible with FURUNO SC-30 satellite compass systems to enable an upgrade to the FURUNO SC-33 satellite compass.

Does the SC-33 support multiple GNSS constellations?

Yes, the SC-33 integrates a multi-GNSS receiver, compatible with the GPS, Galileo, GLONASS, and QZSS satellite networks.

Which communication interfaces does the SC-33 offer?

The SC-33 features a certified NMEA2000® interface, with an NMEA0183 option available via the IF-NMEASC unit.

Is the SC-33 compatible with Furuno NavNet systems?

Yes, the SC-33 system is compatible with the NavNet TZtouch and NavNet TZtouch2 series.

Can the SC-33 integrate with TIMEZERO software?

Yes, the SC-33 system is compatible with TIMEZERO software.

How do I access the SC-33 system menu?

The SC-33 system menu is accessible via the NavPilot 300, TZT (NavNet TZtouch), or TZT2 (NavNet TZtouch2) displays.

What does the OP20-50 kit do with the existing wiring during installation?

The OP20-50 kit converts the existing wiring of a FURUNO SC-30 installation to make it compatible with the new FURUNO SC-33 compass, thus avoiding a full wiring replacement.

Is a full rewiring required when upgrading from an SC-30 to an SC-33 with this kit?

No, the primary purpose of the OP20-50 kit is precisely to avoid the need for a full rewiring by adapting the existing SC-30 wiring for the SC-33.

What is the main advantage of this kit for installation?

The main advantage is the significant reduction in complexity and cost associated with replacing the entire cable infrastructure when upgrading a satellite compass.

Does the kit include the SC-33 compass itself?

No, the OP20-50 is a retrofit kit designed to adapt existing wiring for the SC-33. The SC-33 compass is a separate unit that must be purchased separately.

What is the primary installation-related function of the OP20-50 kit?

Its primary function is to allow reuse of the SC-30's existing wiring when upgrading to an SC-33 compass, simplifying installation by avoiding the need to run new cables.