OP26-29 front-mount kit for FI70

The Furuno OP26-29 front-mounting kit is an accessory designed to enable front installation of the Furuno FI-70 instrumentation display. It is particularly useful when access behind the dashboard or console is limited, simplifying the integration process of the screen.

The main advantages of the OP26-29 kit are simplified installation, particularly in tight spaces where rear access is difficult. It allows for a clean and secure front-mounted installation of the FI-70 display without requiring complex disassembly of the installation area.

The OP26-29 kit is designed to integrate with the FI-70 display, which itself meets IP56 or IPX6 waterproofing standards. Although the kit does not have a specific IP rating mentioned, it is engineered to operate in a marine environment and helps maintain the integrity of the FI-70 display installation, which is protected against high-pressure water jets.

The OP26-29 mounting kit is specifically designed and compatible only with the FURUNO FI-70 instrumentation display. It is not compatible with other Furuno display models or other brands.

No, the OP26-29 mounting kit is designed exclusively for the Furuno FI-70 instrumentation display. It is not compatible with other Furuno display models, even if they appear similar in size.

The OP26-29 kit is a mounting accessory for the FI-70 display. The FI-70 display itself is compatible with Furuno’s NavNet TZtouch/TZtouch2 and NAVpilot 711C systems, as it can integrate via the CAN bus (NMEA2000). The mounting kit simplifies the physical installation of the FI-70 but has no direct electronic compatibility with these systems.

The kit is designed for front-panel installation on a dashboard or console. Compatibility depends on the available space for the required cutout and the panel thickness, which must be sufficient to allow secure fastening of the self-tapping screws and the "click" of the screen. Ensure the cutout template can be used on the selected surface.

The OP26-29 kit is specifically designed for front-mounted installation (flush mount). If you are replacing an existing flush mount, it is essential to verify whether the existing opening matches the dimensions required by the OP26-29 kit template for the FI-70. The kit provides a front-mounting solution, which may be an alternative if your current flush mount is no longer suitable or if you want a different installation method.

To install the OP26-29 mounting kit, you will typically need tools to make a precise cut in the dashboard (e.g., a jigsaw or a suitable hole saw), a screwdriver for self-tapping screws, and potentially a pencil or marker for tracing the template. The cutting template is provided with the kit.

No, the recessed mounting sponge usually supplied with the FI-70 display must not be used with the OP26-29 mounting kit. Using this sponge would prevent the FI-70 unit from locking correctly into the kit's front panel.

The FI-70 display is secured to the OP26-29 mounting kit using a "click" mechanism. Mounting pins are first attached to the FI-70 display, then the display is inserted into the front mounting panel and locks into place, ensuring a stable and secure fit.

Yes, the OP26-29 mounting kit includes a cutting template. This template is essential for making a precise cut in the dashboard or console, ensuring a perfect fit for the front mounting panel.

No, one of the main advantages of the OP26-29 kit is that it is designed for front-mounted installation. This means the installation can be carried out without requiring complex access or disassembly behind the dashboard or console, which is ideal for tight spaces.

The FI-70 screen's "click-in" mounting system in the front panel of the OP26-29 kit is designed for stable and secure retention. While secure, the "click-in" mechanism typically includes an unlocking method to remove the screen when needed, such as for maintenance or replacement. The FI-70 or OP26-29 installation manual should detail the removal procedure.

Yes, when cutting the dashboard, it is crucial to follow the dimensions indicated by the template provided with the OP26-29 kit precisely. It is also recommended to take standard safety measures, such as wearing protective goggles, and to ensure the cutting area is free of cables or other hidden components. A clean and precise cut is essential for a perfect fit and secure installation.

Yes, Furuno mounting kits are generally supplied with a detailed installation manual. This manual provides step-by-step instructions, including the use of the cutting template, securing the pins, and inserting the FI-70 display, to ensure correct and secure installation.

The OP26-29 kit is designed for front-mounted installation, meaning it allows the FI-70 display to be flush-mounted. The required recess depth will be the thickness of the FI-70 display (32 mm) plus the space needed for rear connections. The provided cutting template shows the exact dimensions of the opening, and the installation manual will specify the minimum required depth behind the panel for the FI-70 unit and its cables.