RO-NGX — Bidirectional NMEA2000/USB opto-isolated interface (compatible with MaxSea TZ but not compatib

This device is designed to establish bidirectional communication between an NMEA 2000 network and a computer via a USB connection. It enables data exchange between marine instruments and a PC.

Its primary function is to enable integration of NMEA2000 data with onboard computer systems. This means you can view data from your NMEA2000 network on a PC and potentially send information from the PC back to the network.

Optical isolation is a safety feature that protects against ground loops and electrical interference. It ensures the integrity of signals and the safety of connected equipment by electrically isolating the computer from the NMEA 2000 network.

Yes, the interface is bidirectional. It can both receive data from the NMEA 2000 network to display on a PC, and transmit data from the PC to the NMEA 2000 network.

Enables integration of NMEA 2000 data with PC navigation software.Provides protection against electrical interference through optical isolation.Facilitates planning and chart display using data from your marine network.Ensures reliable and secure communication between your instruments and your computer.

No, the FURUNO RO-NGX-1-USB interface is designed to be powered directly by the NMEA 2000 network to which it is connected. It does not require a separate power supply.

Yes, the RO-NGX-1-USB is equipped with LED indicators. These lights typically signal power status, NMEA 2000 data reception, and data transmission via USB, facilitating quick diagnostics.

The RO-NGX-1-USB interface uses a USB Type-B connector for connection to the computer. It is a standard square connector commonly used for peripherals.

The interface allows NMEA2000 data transmission, which operates at a standard speed of 250 kilobits per second (kbps). Conversion to USB maintains this transmission capability for seamless integration with PC software.

Yes, the FURUNO RO-NGX-1-USB is specifically compatible with MaxSea TZ navigation software, providing seamless integration for users of this platform.

No, it is important to note that this interface is not compatible with the "SC SETTING TOOL" for SCX20 sensors. This must be considered for configurations involving these devices.

Yes, in addition to MaxSea TZ, the interface can be used with other navigation or chartplotting software compatible with NMEA 2000 that supports virtual serial ports (COM ports) created by the USB drivers.

Yes, the interface is designed to support the transmission and reception of all standard NMEA2000 messages (PGNs), enabling full integration with most NMEA2000-compatible marine instruments.

The interface connects directly to your existing NMEA 2000 network via its micro-C NMEA 2000 connector. Simply plug it into an available T-port or drop cable on your NMEA 2000 bus.

Yes, specific drivers are usually required for your operating system to recognize the RO-NGX-1-USB interface as a virtual serial port. These drivers enable communication between the device and software on your PC.

After physical installation and driver setup, you will need to configure your navigation software (such as MaxSea TZ) to use the virtual serial port (COM port) created by the RO-NGX-1-USB interface. This typically involves selecting the correct COM port and baud rate in the software settings.