ROGPS6 - NMEA 0183 GNSS Antenna

The FURUNO ROGPS6 active antenna is a device designed for professional marine navigation. It integrates a GNSS receiver and an antenna in a compact housing, providing accurate and reliable positioning data to your marine electronic equipment.

The ROGPS6 antenna supports multiple satellite navigation systems, including GPS, GLONASS, BeiDou, and SBAS. It also includes a WAAS receiver for improved accuracy.

The FURUNO ROGPS6 antenna has 72 channels, enabling rapid acquisition and stable satellite signal retention for precise positioning.

Yes, the FURUNO ROGPS6 antenna has an IPX7 waterproof rating. This means it is designed to withstand demanding marine environments and can be temporarily submerged without damage.

The FURUNO ROGPS6 antenna requires a 10 to 35 V DC (direct current) power supply to operate correctly.

The FURUNO ROGPS6 is an active antenna. This means it integrates a signal amplifier to enhance satellite signal reception, providing improved performance and sensitivity.

This antenna integrates a next-generation GPS module designed to provide consistent performance and minimal satellite signal acquisition time.

Yes, the FURUNO ROGPS6 active antenna is specifically designed for professional marine navigation, providing a precise and reliable positioning data source.

The ROGPS6 antenna communicates via the NMEA0183 interface. This standard protocol ensures easy integration with a wide range of existing marine electronic equipment.

The ROGPS6 antenna transmits its data at a rate of 4800 baud. This speed is standard for the NMEA0183 protocol and is compatible with most marine devices.

Yes, the ROGPS6 supports the SBAS (Satellite-Based Augmentation System), including a WAAS (Wide Area Augmentation System) receiver, which improves positioning accuracy.

The ROGPS6 antenna uses the NMEA0183 protocol at 4800 baud. If your multifunction display or chartplotter has an NMEA0183 input at this speed, the connection will be possible. It is recommended to verify the specific compatibility of your equipment.

The FURUNO ROGPS6 antenna is supplied with a 15-metre cable, allowing flexible installation on various types of vessels.

For optimal reception of GPS signals, the ROGPS6 antenna must be installed in a clear location with an unobstructed view of the sky and away from any electromagnetic interference sources (such as radars or VHF radios).

The ROGPS6 antenna is designed for flexible installation thanks to its compact size and included 15-meter cable. However, knowledge of marine electronic systems is recommended for NMEA 0183 wiring and power supply.

An active antenna like the ROGPS6 integrates a signal amplifier that improves reception of satellite signals, even weak ones, and reduces signal loss over long cable lengths. This ensures greater reliability and accuracy in positioning.

Yes, as a Furuno product using the standard NMEA0183 protocol, the ROGPS6 is designed to integrate easily with other compatible Furuno marine electronics equipment.

Multi-GNSS support provides redundant and more accurate signal reception. By using multiple satellite constellations, the antenna can achieve more reliable positioning, even in areas where visibility of a single constellation would be limited, and faster acquisition time.

The ROGPS6 antenna is a device for receiving signals. Once properly powered and connected via NMEA 0183 to your equipment, it starts transmitting position data. Any configuration will be done at the receiving device level (chartplotter, MFD) to interpret this data.