50BL-12HR — Sonde traversante FRP 50 kHz, 2 kW, faisceau 14 x 18,5°, câble 15 m

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

Furuno

00001509300

50BL-12HR — Through-hull transducer FRP 50 kHz, 2 kW, 14 x 18.5° beam, 15 m cable

The FURUNO 50BL-12HR through-hull transducer provides 50 kHz underwater detection with 2 kW power and a 14 x 18.5° beam. Its FRP housing ensures robustness suitable for marine environments, compatible with Furuno sounders FCV1900, FCV295, FCV1150, DI-FFAMP, DFF3-UHD. Supplied with a 15 m cable without connector for custom integration.

Retail priceBenefit from the professional rate

2.475,36€

2.475,36€ ~~2.749,17€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Detailed description

Designed for demanding marine applications, the FURUNO 50BL-12HR through-hull transducer is a 50 kHz underwater detection solution with 2 kW power output. Its fiberglass-reinforced plastic (FRP) housing ensures reliable integration and enhanced durability in marine environments.

Technical specifications

The FURUNO 50BL-12HR operates at a single frequency of 50 kHz, delivering a 2 kW output power. It features a directional beam of 14 x 18.5 degrees, suited for targeted coverage beneath the hull. Physical dimensions are 120 mm x 150 mm x 96 mm and it weighs 5.5 kg.

Installation and compatibility

This transducer is designed for through-hull installation, either in a tank or pocket. It comes with a 15-meter cable, without a connector, allowing for custom termination to integrate with the system. The FURUNO 50BL-12HR is compatible with multiple Furuno sounders, including the DI-FFAMP, DFF3-UHD, FCV1900, DFF3, FCV295, and FCV1150 models, ensuring smooth integration into existing or new installations.

Expert opinion

« Technical analysis of the Furuno 50BL-12HR transducer for marine applications »

The FURUNO 50BL-12HR transducer is a technical option for vessels requiring 50 kHz underwater detection with 2 kW power output. Its fiberglass-reinforced plastic (FRP) construction provides adequate resistance to marine stresses, making it a key selection criterion for through-hull installations exposed to water flow and impacts. The 14 x 18.5-degree beam angle is suitable for applications where a relatively narrow and directional coverage is needed, such as seabed or specific target detection at moderate to significant depths.

The absence of a connector on the 15-meter cable requires a custom installation. This offers flexibility for integrators who can adapt the cabling to the existing Furuno system (FCV1900, FCV295, FCV1150, DI-FFAMP, DFF3-UHD) without being constrained by pre-made connectors. However, it demands wiring expertise and careful attention to terminal sealing to ensure long-term system reliability. The transducer’s size and weight (5.5 kg, 120x150x96mm) are important physical characteristics for integration.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

50BL-12HR — Through-hull transducer FRP 50 kHz, 2 kW, 14 x 18.5° beam, 15 m cable

2.475,36€

2.475,36€ ~~2.749,17€~~

Frequently Asked Questions

Need help? Contact us

What is the operating frequency of the FURUNO 50BL-12HR transducer?

The FURUNO 50BL-12HR transducer operates at a single frequency of 50 kHz.

What is the output power of the FURUNO 50BL-12HR depth sounder?

This transducer delivers 2 kW of output power.

What material is the 50BL-12HR depth sounder housing made of?

The depth sounder housing is made of fiberglass-reinforced plastic (FRP), ensuring increased durability in marine environments.

What is the length of the cable supplied with the FURUNO 50BL-12HR depth sounder?

The transducer is supplied with a 15-metre cable.

Is the FURUNO 50BL-12HR transducer supplied with a pre-installed connector?

No, the 15-meter cable is supplied without a connector, allowing custom termination for integration into your system.

What is the beam angle of the 50BL-12HR transducer?

The FURUNO 50BL-12HR transducer has a directional beam of 14 x 18.5 degrees.

What are the physical dimensions of the FURUNO 50BL-12HR depth sounder?

The physical dimensions of this transducer are 120 mm x 150 mm x 96 mm.

What is the weight of the FURUNO 50BL-12HR depth sounder?

The FURUNO 50BL-12HR transducer weighs 5.5 kg.

What is the primary function of the 50BL-12HR depth sounder?

The 50BL-12HR transducer is designed for underwater detection in demanding marine applications.

Is the 50BL-12HR transducer single-frequency or dual-frequency?

This is a single-frequency transducer, operating specifically at 50 kHz.

What does the FRP material bring to the FURUNO 50BL-12HR fishfinder?

Fiberglass reinforced plastic (FRP) ensures reliable integration and increased durability of the depth sounder in marine environments.

Is the 50BL-12HR transducer suitable for all types of boats?

This transducer is designed for demanding marine applications and for through-hull or in-hull installation, making it suitable for various types of vessels requiring this installation method.

What are the possible installation types for the FURUNO 50BL-12HR transducer?

This transducer is designed for through-hull installation, in a tank or in a pocket.

What is a through-hull installation for a depth sounder?

A through-hull installation means the transducer is mounted by drilling a hole in the hull, allowing the active face of the transducer to be in direct contact with the water beneath the hull.

What does a "wet installation" or "pouch installation" mean for this depth sounder?

Installing the transducer "in a tank" or "in a pocket" involves mounting the transducer in a compartment filled with liquid (oil or antifreeze) inside the hull, allowing the beam to pass through the hull without direct contact with the outside water.

Is the depth sounder cable easy to connect to an existing system?

The cable is supplied without a connector, allowing for custom termination. This means an appropriate connector must be added by the installer to match the boat's specific system.

Are specific tools required for through-hull installation of the transducer?

Through-hull installation typically requires specific tools to drill the hull and ensure proper watertightness. It is recommended to hire a professional or consult the detailed installation manual.

Which Furuno fishfinder models is the 50BL-12HR transducer compatible with?

The FURUNO 50BL-12HR transducer is compatible with multiple Furuno fishfinders, including the following models:

DI-FFAMPDFF3-UHDFCV1900DFF3FCV295FCV1150

Can I use this transducer with a fishfinder from a brand other than Furuno?

The compatibility of the 50BL-12HR transducer is specifically mentioned with the Furuno fishfinder models listed. For compatibility with other brands, it is necessary to check the technical specifications of the third-party fishfinder and the transducer.

Is the FURUNO 50BL-12HR depth sounder compatible with multifunction displays (MFD)?

The transducer is compatible with the specified Furuno fishfinders (DI-FFAMP, DFF3-UHD, FCV1900, DFF3, FCV295, FCV1150). If your multifunction display is compatible with any of these fishfinders, the transducer can integrate with it via the fishfinder.