Marine audio cable Fusion marine speaker cable 12 AWG (3.3 mm²), 7.62 m cable

This Fusion marine audio cable is 7.62 metres long, which is equivalent to 25 feet.

The gauge of this cable is 12 AWG (American Wire Gauge), which corresponds to a cross-section of 3.3 mm².

Yes, this cable is specifically designed for the marine environment. Its design ensures increased resistance to harsh conditions encountered at sea, such as moisture, salt, and UV rays.

This cable is designed for high-quality audio transmission to speakers and subwoofers installed aboard a vessel.

A 12 AWG cable has low electrical resistance, which is critical to minimize power loss and ensure high-quality audio transmission, especially over longer distances or for speakers and subwoofers requiring more power.

Yes, with its 12 AWG (3.3 mm²) gauge, this cable is perfectly suited for powering marine subwoofers, ensuring good low-frequency transmission and sufficient power.

Marine cables are designed to withstand corrosive elements in the marine environment such as saltwater, moisture, UV rays, and vibrations. They often use tinned copper conductors and robust sheaths for enhanced durability and performance compared to standard audio cables.

Yes, this Fusion 12 AWG marine speaker cable is a standard cable and is compatible with most other-brand marine speakers and amplifiers that use standard cable connections.

Fusion marine cables are generally designed to be robust while maintaining some flexibility, making them easier to route and install in the often cramped spaces of vessels.

Avoid running the cable near heat sources or electrical components generating interference. Protect the cable from chafing against sharp edges or abrasive surfaces using grommets or protective sleeves. Ensure all connections are watertight and secure to prevent corrosion and signal loss.

Yes, this cable can be cut to the desired length to fit your installation precisely. It is recommended to use appropriate tools to cut and strip the cable to ensure clean and reliable connections.

For a durable and reliable marine installation, it is recommended to use marine-grade connectors, such as tinned copper crimp terminals with heat-shrink insulation, to protect connections from moisture and corrosion.

High-quality audio transmission is ensured by the 12 AWG gauge, which minimizes resistance and signal loss, as well as by the specifically marine-grade design that protects conductors from corrosion and environmental interference, guaranteeing a clear and powerful signal.

Yes, as it is designed for the marine environment, this cable incorporates UV-resistant materials in its outer jacket to prevent degradation from prolonged sun exposure.

Yes, its marine-grade design makes it perfectly suited for outdoor installation on a boat, where it will be exposed to harsh weather, moisture, and UV rays.

Generally, high-quality marine audio cables like this one use tinned copper conductors. The tinning protects the copper from oxidation and corrosion, extending the lifespan and maintaining conductivity in the marine environment.

Yes, this cable is designed to be routed discreetly through the boat's structures. It is important to protect it from pinch points and ensure that passages are properly sealed to maintain the hull or bulkhead integrity.

This cable is a passive speaker cable; it does not carry the boat's electrical system voltage (12V or 24V) directly but carries the amplified signal. It is compatible with marine amplifiers and audio systems operating under these voltages, provided the amplifier's output power stays within the cable's rated capacity.

Speaker cables are usually marked to make it easier to identify the polarities. This can be done with a different color for each conductor, a stripe, or a rib on the insulation of one of the conductors. It is crucial to respect polarity during installation for optimal audio performance.