Marine audio cable Fusion Performance RCA Female-to-male 8-pin splitter cable, 0.6 m (2.1 ft)

This product is a marine audio cable from the Fusion brand, specifically an RCA splitter cable. It is designed for marine audio systems and provides high-performance connections for quality sound transmission.

The length of this RCA splitter cable is 0.6 metres, which is approximately 2.1 feet.

Yes, this cable is explicitly designated as a "marine-grade audio cable" and is part of Fusion's "RCA Performance Cable" range, indicating it is designed to withstand the demanding conditions of a marine environment.

This cable is a splitter with RCA connectors. It has two female RCA connectors and one 8-pin male connector.

The manufacturer's reference for this cable is 010-13356-00.

This cable is generally sold individually. The product description and SKU reference correspond to a single cable.

This cable is compatible with marine audio systems using standard RCA connections and 8-pin inputs/outputs. It is important to check your audio equipment specifications to ensure connector compatibility.

Yes, this RCA splitter cable can be used to connect marine amplifiers, particularly if you need to split or combine RCA audio signals to or from an 8-pin input/output on your amplifier or audio source.

Yes, as a Fusion brand product, this cable is designed to be compatible with Fusion main units and other marine audio components that use RCA connections and 8-pin interfaces.

Although this cable is designed for marine environments, it can technically be used with non-marine audio systems if the connector types (RCA and 8-pin) match. However, its marine-grade environmental resistance properties would not be fully utilized.

Connect the two female RCA ends to the RCA audio outputs of your source (for example, a main unit) or to the inputs of your amplifier. The 8-pin male end will connect to the corresponding input or output of your other device, such as a signal processor or amplifier, depending on your system configuration.

RCA cables generally do not have a specific signal direction, but it is crucial to ensure that the female connectors are plugged into the RCA outputs and that the 8-pin male connector is connected to the corresponding input or output of the target device, respecting the left and right channels where applicable.

Installing this cable generally does not require special tools. It is a plug-and-play connection. However, for clean and secure routing in a vessel, cable ties or tools for running cables may be useful.

This cable should be installed in areas where it will be protected from physical damage and excessive moisture, even though it is designed for the marine environment. Avoid routing it near power cables to minimize interference. Ensure there is sufficient slack to prevent tension on the connectors.

Yes, like most branded marine electronic products, this Fusion audio cable is covered by the manufacturer's warranty. Specific warranty details are provided by the manufacturer.

The packaging contains one (1) Fusion Marine Audio Cable, RCA Performance cable, female-to-male 8-contact RCA splitter cable, 0.6 m (2.1 ft) long.

Yes, as a high-performance marine audio cable, it is designed to provide good resistance to corrosion, which is essential for the durability and reliability of connections in the salty and humid marine environment.

Fusion marine audio cables are typically designed to be flexible enough for practical installation in the often cramped spaces of vessels while maintaining their structural integrity and performance.