Marine speaker cable 16 AWG 7.62 m

This Fusion marine audio cable is supplied in a 7.62-metre (approximately 25-foot) length, which is suitable for many marine speaker and subwoofer installations.

The cross-section of this cable is 16 AWG (American Wire Gauge), which corresponds to approximately 1.3 mm².

Yes, this cable is specifically designed for the marine environment. Its robust construction and materials are suited to withstand harsh conditions encountered at sea, such as moisture, salt, and temperature variations.

This cable is primarily intended for connecting marine speakers and subwoofers, ensuring high-fidelity audio transmission within your Fusion marine audio system.

Yes, although this cable is a Fusion brand and optimized for their products, it can be used with marine speakers from other brands, provided the cable gauge (16 AWG) is suitable for the power and distance of your installation.

Yes, this 16 AWG cable is suitable for connecting marine subwoofers, particularly for moderate power levels and cable lengths of 7.62 meters, ensuring good audio signal transmission.

Yes, Fusion marine audio cables are designed to be UV-resistant, which is essential for outdoor use on a boat where sun exposure is constant.

Yes, this cable is designed to be sufficiently flexible to facilitate installation and routing through the often confined spaces on board, while maintaining its robustness.

To connect this cable, basic tools such as wire strippers and possibly a crimping tool for connectors (if you are using terminals) are generally sufficient. No specialized tools beyond standard marine electrician's tooling are required.

Yes, you can cut this cable to the desired length to fit your installation perfectly. Ensure the cuts are clean and connections are properly made to maintain audio signal integrity.

For a durable installation, it is recommended to:

Run the cable through conduits or protective sleeves for additional protection against abrasion and moisture. Use cable ties to secure the cable and prevent movement. Ensure all connections are watertight and protected from corrosion. Avoid sharp bends that could damage the cable.

This cable is a passive audio cable, so it is compatible with standard marine audio systems that typically operate on 12V or 24V power for amplification. The cable itself carries the audio signal, not the system's main power.

Fusion marine audio cables are typically made with tinned copper conductors. The tin plating on the copper provides excellent resistance to corrosion, a major advantage in the saline marine environment.

Yes, thanks to its marine-grade design and tinned copper conductors, this cable offers excellent resistance to saltwater and corrosion, ensuring enhanced performance and durability in a marine environment.

The main difference lies in robustness and resistance to the elements. A marine-grade cable like this one is specifically designed to withstand moisture, salt, UV rays, vibrations, and extreme temperatures found at sea, unlike a standard audio cable which lacks these protections.

The product description does not specify any particular shielding. However, speaker cables are generally designed to minimize interference thanks to their twisted or parallel construction, but they are not shielded in the same way as RCA signal cables, for example.

Yes, this cable is designed for permanent installation and can be run inside the hull or under the deck. It is always recommended to provide additional protection with conduits or hoses in areas prone to abrasion or direct water exposure.

This product is a single 7.62-meter cable. It is sold individually, allowing you to purchase the exact length required for your installation.

The 16 AWG (1.3 mm²) section is a good compromise for marine speaker cables. It is sufficient for most marine speakers and moderate-power subwoofers over lengths up to 25 ft (7.62 m), minimizing power loss and ensuring good sound quality.