Marine tweeter SG-TW101SPB

The Fusion SG-TW101SPB marine tweeter is designed to enhance audio experience at sea by specifically reproducing high frequencies. It optimizes sound clarity in marine environments, particularly when paired with Fusion Signature Series speakers.

For installation, the tweeter requires a mounting diameter (cutout) of 51 mm (2 inches) and a minimum mounting depth (clearance) of 31 mm (1 1/4 inches).

This tweeter has a maximum power of 330 W and an RMS (Root Mean Square) power of 60 W.

The SG-TW101SPB tweeter covers a frequency range from 3 kHz to 20 kHz, allowing it to reproduce high-pitched sounds with precision.

Yes, this tweeter is rated IP65 according to IEC 60529, meaning it is protected against dust and low-pressure water jets under normal conditions. It is designed to withstand marine environments.

The diaphragm of the Fusion SG-TW101SPB tweeter is made of aluminum (rigid dome), which contributes to clear and precise high-frequency reproduction.

The SG-TW101SPB tweeter is compatible only with Fusion Signature Series speakers. It is designed to integrate specifically with these audio systems.

No, this product is only compatible with car stereos equipped with DSP (Digital Signal Processing) technology and stable at 2 ohms per channel. It is essential to verify your car stereo’s compatibility before installation to avoid any damage.

When the tweeter is connected to a Fusion Signature Series speaker, the nominal impedance of the combined system is 2 Ohms. The impedance of the tweeter alone is 4 Ohms.

The recommended amplifier power (RMS) for this tweeter is 25 to 140 W per channel to ensure optimal performance and avoid damaging the system.

For installation, you will need the following tools:

An electric drillA bit (size varies depending on the material)A 51 mm (2 inch) hole sawA Phillips screwdriverWire strippersAdditional tools and materials may be required for custom installations.

Yes, a 2-metre (6.5 ft) cable is included with each tweeter and should be sufficient for most installations. If an extension is required, a marine-grade speaker wire of 16 AWG (1.3 to 1.5 mm²) or larger is recommended.

For optimal sound, tweeters should be placed as close as possible to the paired Fusion Signature Series speakers and high enough for high-frequency sounds to be clearly audible, creating a soundstage effect. It is important to choose locations with sufficient clearance for mounting depth and to avoid potential obstructions such as fuel lines or cables.

No, this tweeter includes an internal passive filter, so no additional external filter module is required.

After connecting the tweeters to the Fusion Signature Series speakers, you must configure the DSP profile on your compatible car stereo. Use the Fusion-Link™ remote app to open the car stereo’s DSP settings, select the appropriate DSP profile for the Signature Series speakers and tweeter, and apply it. You can then fine-tune the tweeter output by adjusting the high frequencies.

Yes, it is critical to protect all terminal blocks and connections against grounding and between each other, as a failure could damage the audio system and void the warranty. The audio system must also be turned off before making any connections, and speaker cables should not be routed near sources of electrical interference.

To clean the tweeters, use a damp cloth soaked in fresh water to remove salt and residue. For heavy salt buildup or stains, a mild detergent may be used. Never use harsh cleaners or solvent-based products, and avoid high-pressure water sprays as they may damage the product and void the warranty.

As a True-Marine™ product, the Fusion SG-TW101SPB tweeter is covered by a 3-year limited global consumer warranty provided by Fusion.

Yes, the SG-TW101SPB tweeter is a True-Marine™ product. This means it has undergone rigorous environmental testing in harsh marine conditions to exceed marine industry product directives, ensuring its robustness and reliability.

Yes, using aggressive or solvent-based cleaners on the tweeters can damage the product and void the warranty. Clean the product only with a damp cloth and fresh water, or a mild detergent if necessary.