Marine audio spacer for flush deck mounting Apollo™ ERX400

This spacer is an accessory specifically designed for the Fusion Apollo™ ERX400 marine wired remote controller. It allows for a clean and flush-mounted installation of the unit on a flat surface of your vessel.

The spacer facilitates the flush-mount installation (deck-mounted) of the Fusion Apollo™ ERX400 controller. It ensures an aesthetically pleasing and integrated finish by compensating for minor gaps or adjusting the mounting depth so the unit fits perfectly flush with the surface.

The spacer is usually black, designed to blend with the aesthetics of the Fusion Apollo™ ERX400 remote controller and most marine dashboards.

Yes, as a Fusion marine-grade product, this spacer is designed to provide excellent resistance to salt water, UV rays, and other harsh environmental conditions encountered at sea, ensuring its durability.

The spacer is usually supplied separately. It is designed for use with the Apollo™ ERX400 controller’s standard mounting hardware or, if necessary, slightly longer screws to compensate for the added thickness of the spacer.

This spacer is specifically sized to fit perfectly with the Fusion Apollo™ ERX400 remote controller. Its external and internal dimensions are designed to match the contours of the device and its installation cutout.

No, using this spacer is not mandatory for installing the ERX400. It is an optional accessory that improves the aesthetics and finish of a flush-mounted installation, or may be required if the mounting panel thickness is insufficient for direct flush mounting.

No, this spacer is very light. It is designed to add minimal weight to the overall installation of the Apollo™ ERX400 controller, without affecting the mounting panel structure.

This spacer is exclusively compatible with the Fusion Apollo™ ERX400 marine wired remote controller.

No, this spacer is custom-designed for the Fusion Apollo™ ERX400 and is not compatible with other models in the Apollo range or other Fusion devices.

No, this spacer is specifically designed for the Fusion Apollo™ ERX400 and will not be compatible with marine audio devices from other brands due to differences in dimensions and mounting points.

The spacer is positioned between the mounting panel and the Apollo™ ERX400 controller. After cutting the required installation hole for the ERX400, the spacer is placed around the hole, then the ERX400 is inserted and secured, with the spacer sandwiched in place to ensure a clean, flush finish.

The required tools are the same as those needed for installing the Apollo™ ERX400 controller itself, typically including a hole saw or jigsaw for cutting the panel, a screwdriver, and possibly a drill bit for screw holes.

No, the spacer uses the same mounting points as the Apollo™ ERX400 controller. It integrates into the existing mounting process without requiring additional drilling specific to the spacer.

Yes, the spacer adds a slight thickness between the panel surface and the ERX400 body. This allows for a flush finish even on panels whose thickness is slightly below the recommended value for direct mounting, or for a specific aesthetic.

No, when installed correctly, the spacer is designed to maintain the integrity of the Apollo™ ERX400 controller’s installation sealing. Follow the ERX400 installation instructions to ensure optimal sealing.

An installation manual dedicated to the spacer is generally not provided separately. Instructions for using this accessory are often included or mentioned in the Fusion Apollo™ ERX400 controller installation manual.

Yes, this spacer is an official Fusion accessory and is covered by the manufacturer’s standard limited warranty applicable to marine accessories.

No, using this spacer, being an official Fusion accessory designed specifically for the Apollo™ ERX400, does not in any way affect the warranty of your controller. On the contrary, it ensures installation in compliance with the manufacturer's recommendations.