Flush-mount kit (STRIKER™ Plus 4/4cv)

This accessory is designed to mount Garmin STRIKER™ Plus 4 and STRIKER™ Plus 4cv fishfinder displays flush into a dashboard, console, or control panel. It enables a seamless and discreet integration of the unit.

Using this kit provides a flush finish and a low profile for your device, reducing snagging risks and optimizing the available space on your console or dashboard.

The Garmin 010-12440-10 flush-mount kit is primarily made of plastic, providing both lightweight construction and durability for your device integration.

The kit includes all mounting hardware (screws, etc.), detailed installation instructions, and a precise cutting template to ensure proper installation.

Unlike traditional clamp mounts that hold the device above the mounting surface, this flush-mount kit integrates directly into the mounting surface. It provides a flush finish and a more discreet profile, optimizing space and reducing snagging risks.

The cutout required in the mounting surface for flush-mounting the STRIKER™ Plus 4 or STRIKER™ Plus 4cv is 91 mm (3 9/16 in.) in height and 80 mm (3 1/8 in.) in width. These dimensions are the specified ones for the STRIKER™ 4 series.

This flush-mount kit is specifically compatible with Garmin STRIKER™ Plus 4 and STRIKER™ Plus 4cv fishfinder models.

No, compatibility is specifically ensured for STRIKER™ Plus 4 and STRIKER™ Plus 4cv models. It is not designed for other models in the STRIKER™ series.

Compatible devices are fishfinders with a 4.3-inch QSVGA color screen and a resolution of 272 x 480 pixels. They include traditional CHIRP sonar (and Garmin's CHIRP ClearVü™ for the STRIKER™ Plus 4cv model), a high-sensitivity GPS, and Quickdraw Contours mapping software.

The kit ensures secure fastening via screws. The mounting hardware required, including screws, is included in the kit to guarantee a robust installation.

The kit includes detailed instructions and a precise cutting template to facilitate installation. However, installation requires cutting into the mounting surface, which demands some skill and the appropriate tools.

Yes, it is strongly recommended to use the cutting template provided in the product box. If you need to print a template, it is crucial to strictly follow Garmin's instructions to ensure the correct size and avoid incorrect cuts.

Yes, it is recommended to maintain a 30 cm (11.8 in.) clearance between the flush-mounted device and a compass to avoid magnetic interference that could affect compass accuracy.

Select the installation location on the dashboard, console, or control station.Use the provided cutting template to mark the area to be cut out.Cut precisely following the template.Insert the unit with the flush-mount kit into the opening.Secure everything firmly using the included screws and mounting hardware.Follow the detailed instructions provided in the installation manual for each step.

Yes, the Garmin 010-12440-10 flush-mount kit includes a precise cutting template to help you make the opening required for installation in your dashboard or console.

If the printed cutting template is not the correct size, this can result in an incorrect cut (too large or too small) on the mounting surface of your boat. An incorrect cut could damage the surface and make installation impossible or unsafe. Garmin disclaims any liability for damage resulting from an incorrect cut due to failure to follow printing instructions.

Yes, like most Garmin products, this flush-mount kit is covered by the manufacturer’s standard warranty. For specific details and warranty duration, refer to the official Garmin documentation provided with the product.

In the event of a manufacturing defect found in the flush-mount kit, it is recommended to contact Garmin customer service or the dealer from whom the kit was purchased. They will guide you through the warranty claim process.

The kit is supplied with all necessary mounting hardware (screws, etc.) and instructions, but specific tools (such as a jigsaw for cutting or a screwdriver) are generally not included and must be provided by the user.

This flush-mount kit is specifically designed for optimal compatibility with the following Garmin fishfinder models:

Garmin STRIKER™ Plus 4Garmin STRIKER™ Plus 4cvIt is essential to ensure your device matches one of these models to guarantee correct installation and a flush integration into your dashboard or console.