GPSMAP® 8410xsv - combiné GPS-sondeur 10" - visuel officiel Garmin 2

GPSMAP® 8410xsv - combiné GPS-sondeur 10" - visuel officiel Garmin 3

GPSMAP® 8410xsv - combiné GPS-sondeur 10" - visuel officiel Garmin 4

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 9%

Garmin

010-02091-02

GPSMAP® 8410xsv - 10" GPS-sounder combo

The GPSMAP® 8410xsv is a chartplotter from Garmin’s 8400/8600 series, offering advanced marine network integration and extended video management capabilities. While part of an established and supported product family, it excels in integrating FLIR cameras and sensors for tracking. The product ships as-is, with no accessories specifically mentioned in this context.

Retail priceBenefit from the professional rate

2.381,96€

2.381,96€ ~~2.624,17€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Operating voltage	10-35 V
Operating temperature	-15 to 55 °C
Supported sonar technologies	Traditional CHIRP, ClearVü, SideVü, Panoptix
Fishfinder frequencies	50/77/200 kHz
Product dimensions	315 x 260 x 115 mm
Sonar connector type	Garmin proprietary connector
ActiveTarget compatible	No
Chart compatibility	BlueChart g3, LakeVü g3, Garmin Navionics+
IP rating	IPX7
Sonar recording	Yes
Bus compatibility	NMEA 2000,NMEA 0183,J1939
Trolling motor integration	Yes
Wired network	Garmin Marine Network, Ethernet
Integrated GPS antenna	Yes
Wireless connectivity	Wi-Fi, ANT
Compass safe distance	30 cm
Mounting type	Flush-mounted
Certifications	CE, IEC 60945, NMEA 2000
Cutout size	250 x 176.7 mm
Display resolution	1280 x 800 pixels
Display type	LCD
Screen brightness	1200 nits
Screen size	10
Touchscreen	Yes
Max SD card size	32
Viewing angle	178 °
Software update method	SD card or ActiveCaptain
Wired input	HDMI, Composite video, NMEA 2000, NMEA 0183, Garmin Marine Network
User level	Expert
Fishing type	Sea, Lake, River, Trolling
Warranty	2.0
Release year	2016.0
Package contents	GPSMAP 8410xsv, power cable, flush-mount kit, ferrites, documentation
Temperature measurement range	Depends on the connected transducer
Available alarms	Depth, temperature, arrival, anchor, leeway, MOB, AIS, radar
Camera Control Method	Touch (pinch, zoom, pan, tilt)
Camera Settings Customization	Position, zoom, color scheme, scene, polarity
Ethernet Cable Type Recommended	CAT 5e F/FTP shielded
External storage type	SD card
Flir Camera Plug And Play	Yes
Heading Sensor Technology	9 axes (yaw, pitch, roll)
Max depth	1524 m (5000 ft) at 1 kW
Maximum simultaneous video streams	5
Man overboard (MOB) support	Yes
Network Expander Compatibility	Garmin GMS 10
Power Supply For Testing	10-35 Vdc, 6-10 A
Product depth	115
Product height	260
Product width	315
Technical support phone	USA: 866-418-9438, UK: 0808 238 0000, Europe: +44 (0) 870 850 1241

Detailed description

Designed for demanding sailors, the Garmin GPSMAP® 8410xsv is a 10-inch chartplotter-sounder combo that delivers MFD-level performance in a compact format. This model features a 10.1-inch (21.8 cm x 13.7 cm) Full HD IPS touchscreen with WUXGA resolution (1920 x 1200 pixels), ensuring superior clarity and readability even in bright sunlight and with polarized sunglasses. Weighing 2.4 kg and measuring 25.9 cm x 20.5 cm x 7.5 cm, it is rugged with IPX7 and IPX6 waterproof ratings and offers flush, bracket, or tabletop mounting options.

Sonar and Network Capabilities

The "xsv" suffix in the GPSMAP® 8410xsv indicates full integration of a built-in sounder module without requiring an external black box. It supports traditional CHIRP dual-channel sonar up to 1 kW (70/83/200 kHz, CHIRP L, M, H), as well as CHIRP ClearVü and SideVü scanning sonars (260/455/800/1000/1200 kHz), including Ultra High Definition support. It is also compatible with the full Panoptix™ sonar range (transducers sold separately). This integration simplifies installation and saves space aboard, unlike non-xsv models that require external sounder modules.

This combo serves as the hub of a complete marine network with two Garmin Marine Network™ ports and one NMEA 2000® port, enabling integration of radar, autopilots, cameras, instruments, and forward-scanning sonars, all controllable from the display and shareable across multiple screens. The GPSMAP® 8410xsv also includes composite BNC and HDMI video inputs, plus an HDMI output, providing flexibility for multi-screen monitoring and display.

Advanced Navigation and Video Integration

The Garmin GPSMAP® 8410xsv is equipped with a 10 Hz GPS/GLONASS/Galileo receiver and comes preloaded with Garmin Navionics+™ marine and inland charts, including Auto Guidance+™ technology and a one-year subscription for daily updates. For racing sailors, it includes Garmin SailAssist™ features such as laylines, regatta start assist, enhanced wind rose, and real-time wind data display.

Network camera integration is a key feature, allowing up to five video streams to be viewed and controlled simultaneously on the chartplotter screen. FLIR® cameras, including the M and MD series, are automatically detected and can provide thermal imaging. To connect standard Ethernet devices, a Garmin PoE isolation coupler (010-10580-10) is required to prevent damage. The system also supports advanced camera tracking functions such as compass or vessel lock, and AIS/MARPA target tracking, which require specific sensors (9-axis GPS antenna, heading sensor) and a compatible radar or AIS receiver.

Documentation

Type	Nom
	Notice d'installation - Guide d'intégration de caméras marines tierces pour GPSMAP 8410xsv (EN)
	Notice d'installation - Instructions d'installation des perles de ferrite (MULTI)
	Manuel utilisateur - Manuel de service et réparation pour traceurs GPSMAP 8400/8600 (EN)
	Gabarit de montage - Gabarit de montage pour Garmin GPSMAP 8410xsv (EN)
	Manuel utilisateur - Consignes de sécurité pour Garmin GPSMAP 8410xsv (EN)

Expert opinion

Pol CONIN

Digital Manager

« Advanced network and video integration for optimal marine surveillance »

As an expert installer, I position the Garmin GPSMAP® 8410xsv as a strategic solution for boat owners seeking the power of a high-end MFD in a 10-inch format. This model is particularly suited to performance sailboats, mid-sized sportfishing boats, and day cruisers where dashboard space is optimized, but the requirement for features and integration remains high. Its practical value lies in its ability to centralize all navigation, depth sounder, and propulsion data while offering specific tools for regattas or fish detection.

The key difference of the 8410xsv compared to its non-"xsv" counterparts is its integrated depth sounder module. This eliminates the need to install an external depth sounder unit such as the GSD 25, significantly simplifying wiring and reducing clutter. For installation, this means fewer components to mount, time savings, and increased system reliability. It offers native compatibility with 1 kW CHIRP transducers and ClearVü/SideVü UHD technologies, which is essential for precise bottom and underwater structure readings.

Advanced network integration with two Garmin Marine Network ports and one NMEA 2000 port allows for building a coherent and scalable system. A critical point when installing third-party cameras or other Ethernet devices is the mandatory use of the Garmin PoE isolation coupler (part number 010-10580-10). Neglecting this detail can cause irreversible damage to the chartplotter. For camera tracking functions, it is essential to understand that this requires a complete ecosystem, including a 9-axis heading sensor and a compatible FLIR IP camera; it is not a fully "plug-and-play" feature but a capability of the Garmin system as a whole.

While the 8410xsv is highly capable, it is important to note that for very large vessels (over 15 meters), a 10-inch display may be perceived as insufficient for intensive multitasking as a primary display. It excels then as a secondary display for a flybridge helm or as a primary display on more compact units. Its Full HD IPS screen is a clear advantage for visibility, even with polarized sunglasses, avoiding the readability compromises often encountered on lower-resolution displays.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

GPSMAP® 8410xsv - 10" GPS-sounder combo

2.381,96€

2.381,96€ ~~2.624,17€~~

Frequently Asked Questions

Need help? Contact us

What are the main features of the GPSMAP 8410xsv?

The GPSMAP 8410xsv is a chartplotter from Garmin’s 8400/8600 series. It provides advanced marine network integration and expanded video management capabilities. It particularly excels in integrating FLIR cameras and sensors for tracking, enabling comprehensive marine monitoring.

How to connect third-party Ethernet devices, such as a network camera, to the GPSMAP 8410xsv?

To connect standard Ethernet devices (such as a network camera, network switch, or PoE injector) to a Garmin marine network, a Garmin PoE isolation coupler (part number 010-10580-10) is required. Using a shielded cable, such as a CAT 5e F/FTP, is recommended for better protection of your equipment.

What are the dimensions required for a flush-mount installation?

For a flush-mount installation, the required cutout for the GPSMAP 8410xsv is 210.8 mm (8 5/16 in) wide by 176.7 mm (6 15/16 in) high.

Does the GPSMAP 8410xsv support camera tracking?

Yes, the GPSMAP 8410xsv supports various camera tracking functions, including:

Compass Lock: Keeps the camera fixed in a specific heading.Vessel Lock: Locks the camera at a fixed angle relative to the vessel.Target tracking: Allows tracking of AIS targets, MARPA targets, or waypoints.These features require connection to compatible sensors and cameras via the Garmin marine network or the NMEA 2000 network.

How do I update the software on my GPSMAP 8410xsv?

Your GPSMAP 8410xsv software can be updated in two main ways:

Via a memory card (16 to 32 GB, formatted in FAT32) on which the update file has been preloaded.Using the Garmin ActiveCaptain® app.It is recommended to ensure the software is up to date before any maintenance or if you encounter issues.

Should I install ferrite cores when installing cables?

Yes, it is recommended to install a ferrite core on the power cable and on each network cable. For devices equipped with a fishfinder, a ferrite core must also be installed on each transducer cable.

What are the mounting options available for the GPSMAP 8410xsv?

The GPSMAP 8410xsv can be installed in various ways, including bracket mounting, flush mount, or recessed mount.

What are the cut-out dimensions required for a flush-mount installation of the GPSMAP 8410xsv?

For a flush-mount installation, the required cutout is 210.8 mm (8 5/16 in) wide by 176.7 mm (6 15/16 in) tall. Use the template provided with the product to ensure accurate cutting.

How to connect third-party network cameras to the GPSMAP 841xsv via the Garmin marine network?

To connect standard Ethernet devices, such as network cameras, to a Garmin Marine Network, you must use a Garmin PoE isolation coupler (part number 010-10580-10). Directly connecting a PoE device to a Garmin Marine Network chartplotter may damage the device.

Does the GPSMAP 8410xsv support FLIR thermal cameras?

Yes, the GPSMAP 8410xsv is compatible with FLIR marine cameras from the M and MD series. FLIR IP cameras are automatically detected on the network and do not require pre-configuration before installation.

What are the integrated sonar capabilities of the GPSMAP 8410xsv?

The GPSMAP 8410xsv features built-in sonar capabilities, as indicated by the "xsv" suffix in its name and the mention of transducer cables in the documentation. A compatible transducer is required to use these functions.

Does the GPSMAP 8410xsv support camera tracking?

Yes, the GPSMAP 8410xsv supports various camera tracking functions, including:

Heading lock: To keep the camera fixed on a compass heading.
Ship lock: To lock the camera at a fixed angle relative to the vessel.
Target tracking: To track AIS targets, MARPA or waypoints (also called "slew-to-cue").
These functions require connecting specific sensors and cameras via the Garmin marine network or the NMEA 2000 network.

Which marine network types are supported by the GPSMAP 841xsv?

The GPSMAP 8410xsv supports several types of marine networks, including:

Garmin NMEA 2000 networkNMEA 0183Wi-FiANT®J1939

Is it necessary to install ferrite cores on the GPSMAP 8410xsv cables?

Yes, it is recommended to install a ferrite core on the power cable and on each network cable. For devices equipped with a fishfinder, a core must also be installed on each transducer cable.

Is the GPSMAP 8410xsv equipped with a touchscreen?

Yes, the GPSMAP 8410xsv features a touchscreen that supports gestures such as pinching to zoom and swiping to pan and tilt the camera.

How many video streams can the GPSMAP 8410xsv display simultaneously?

For optimal network performance, Garmin recommends not streaming more than five video sources simultaneously. You can configure split-screen displays to view multiple videos at once.

How can I update the software on my GPSMAP 8410xsv?

You can update the software of your GPSMAP 8410xsv using the ActiveCaptain® app or by loading the new software onto a memory card (16 to 32 GB, formatted as FAT32) and inserting it into the chartplotter's card reader.

Can the GPSMAP 8410xsv control the parameters of connected FLIR cameras?

Yes, via the chartplotter screen, you can adjust various settings of connected FLIR cameras, such as polarity, color scheme, and scene adjustment (gain control). For FLIR M-series dual-payload cameras, you can also switch between thermal and visible views.

Is the GPSMAP 8410xsv waterproof?

Yes, the GPSMAP 8410xsv is designed to be water-resistant. It is essential to ensure that all sealing gaskets are properly reinstalled or replaced during any service to maintain this water resistance.