LUX SL180, Strip Light, CRGBW, 4000mm - Garmin image 1

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 11%

Garmin

010-04399-00

LUX SL180, CRGBW LED light strip, 4000 mm

Designed for marine interior and exterior lighting, the Garmin LUX SL180 CRGBW 4000mm LED strip offers full-spectrum and tunable white lighting. IP68 certified, UV-resistant and salt-mist resistant, it integrates discreetly with its 5mm profile. Supplied in a fixed 4000mm length, it requires the Lumishore LUX Strip Light Driver control module and comes with 3M adhesive and mounting clips.

Retail priceBenefit from the professional rate

215,30€

215,30€ ~~241,66€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Product subtype	LED light strip
Operating voltage	23-25 V
Typical power consumption	20 W
Light color	CRGBW
IP rating	IP68
Dimmable	Oui
Strip length (meters)	4.0
Adhesive backing	Oui
Compatible Driver Module	Lumishore LUX Strip Light Driver autopilot module
Max Current Consumption Per Meter 12v	0.6 A/m
Max Current Consumption Per Meter 24v	0.36 A/m
Mounting type	3M Adhesive, Mechanical Fasteners, Mounting Clips
Power consumption per meter	5 W/m
Product dimensions (L x W x H)	4000 x 14.5 x 5
Salt Fog Certified	Yes
Strip Depth Mm	5
Strip width (mm)	14.5
UV resistance	Yes

Detailed description

Designed for marine ambient lighting, the Garmin LUX SL180 CRGBW 4000mm strip light provides a versatile lighting solution for vessels. This lighting system can produce a full CRGBW color spectrum (cool white, red, green, blue, warm white) as well as tunable white from 2700 K to 6500 K, enabling precise customization of onboard ambiance.

Design and Technical Specifications

The LUX SL180 is fully encapsulated and factory-sealed to IP68 standards, making it suitable for damp areas though not designed for permanent submersion. Its UV-resistant material construction and salt spray test certification ensure durability in marine environments. With a depth of approximately 5 mm and a width of 14.5 mm, its low profile allows discreet integration under gunwales, behind panels, or beneath furniture.

Installation and System Integration

Each meter of strip light consumes 5 watts, with a maximum current draw of 0.6 A/m at 12 V and 0.36 A/m at 24 V via the dedicated driver module. The LUX SL180 requires connection to the Lumishore LUX Strip Light Driver module (sold separately) to operate, with an input voltage range of 23-25V. Mechanical installation uses 3M adhesive and screw-in mounting clips (supplied), recommended every 25 to 30 cm for optimal hold, especially outdoors or in damp-prone areas. The strip has a minimum bending radius of 50mm on the vertical axis only; twisting or horizontal bending is prohibited. Unlike some cuttable LED solutions, the LUX SL180 is supplied in ready-to-use lengths and must not be cut to maintain its IP68 integrity.

Control and Flexibility

Lighting control can be achieved via a momentary switch (with the driver module), or more advanced control via a compatible multifunction display (MFD), dedicated Lumishore screen, or smart device, in conjunction with the EOS-LUX Command Center control hub. This flexibility positions the LUX SL180 as part of an integrated marine lighting ecosystem, offering standard dimming capabilities to adjust light intensity. The product carries a 3-year warranty.

Documentation

Type	Nom
	Notice d'installation - Guide d'installation des bandeaux lumineux LUX SL90 & SL180 IP68

Expert opinion

Pol CONIN

Digital Manager

« Garmin LUX SL180 marine ambient lighting: integration and versatility »

The Garmin LUX SL180 is the clear choice for boat owners seeking an integrated CRGBW lighting solution within the Garmin/Lumishore ecosystem. Its ability to deliver a full color spectrum, including tunable white, allows for advanced customization of ambiance, from functional cool-white lighting to colorful scenarios for relaxation or entertainment. This is a significant advantage over monochrome LED strips or more basic RGB/RGBW solutions.

While the electrical installation is straightforward with the dedicated Lumishore driver, mechanical positioning requires careful attention. The 3M adhesive works well on clean surfaces, but adding mounting clips (every 25-30cm, or at the ends of curves) is essential for outdoor installations, wet areas, or when using the 50mm vertical bend radius. It is critical to respect this radius and avoid any horizontal twisting or bending to prevent damaging the strip. Another key point: this strip is factory-sealed and cannot be cut, meaning the correct length (here 4000mm) must be selected upfront, unlike some competing products that offer regular cut points. Although IP68-rated, this product is not designed for permanent submersion.

This model is therefore intended for new installations or refits where full integration with Garmin/Lumishore navigation and control systems is desired, providing centralized and sophisticated management of ambient lighting. Its robustness and resistance to marine elements (UV, salt fog) make it a reliable choice for durable onboard lighting.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

LUX SL180, CRGBW LED light strip, 4000 mm

215,30€

215,30€ ~~241,66€~~

Frequently Asked Questions

Need help? Contact us

What is the length of this Garmin LUX SL180 LED strip?

The Garmin LUX SL180 light bar has a length of 4000 mm, or 4 meters.

What lighting colors are available with the LUX SL180 CRGBW LED strip?

The LUX SL180 CRGBW LED light strip provides a full spectrum of colors, including cold white, red, green, blue, and warm white. This allows for extensive customization of the lighting ambiance aboard your vessel.

Is the LUX SL180 light strip suitable for marine use?

Yes, the LUX SL180 LED light strip is specifically designed for marine ambient lighting. It is made from UV-resistant materials and is certified for salt spray testing, ensuring durability in this environment.

What is the water resistance rating of the LUX SL180 light strip?

The LUX SL180 LED strip is fully encapsulated and factory-sealed to meet IP68 standards. This makes it suitable for damp areas. However, it is not designed for permanent submersion in water.

What are the physical dimensions of the LUX SL180 light strip?

The LUX SL180 light strip has a low profile with a depth of approximately 5 mm and a width of 14.5 mm. These dimensions allow for discreet integration under gunwales, behind panels, or beneath the furniture on your vessel.

Is the LUX SL180 LED light bar UV-resistant and salt fog resistant?

Yes, the LUX SL180 LED strip is made from UV-resistant material and has passed salt spray testing certification. These features ensure its durability and performance in a marine environment.

What type of white light can this LED strip produce?

In addition to the cool white and warm white included in the CRGBW spectrum, the LUX SL180 LED strip can produce a tunable white. This means you can adjust the white color temperature from 2700 K to 6500 K to create the desired ambiance.

What is the power consumption of the LUX SL180 LED strip per meter?

The LUX SL180 light strip consumes 5 watts per meter. Maximum current draw is 0.6 A/m at 12 V and 0.36 A/m at 24 V when connected via the dedicated control module.

What equipment is required to operate the Garmin LUX SL180 LED strip?

The Garmin LUX SL180 light strip requires a connection to the Lumishore LUX Strip Light Driver module to operate. This module is sold separately and is essential for powering and controlling the light strip.

Can I connect the LUX SL180 LED strip to a lighting controller from another brand?

No, the LUX SL180 LED strip is designed to operate exclusively with Lumishore LUX Strip Light Driver control modules. Connection to third-party lighting controllers or drivers is not supported and may void the warranty.

Is the LUX SL180 LED light bar compatible with 12V and 24V marine electrical systems?

Yes, the LUX SL180 LED strip is compatible with 12V and 24V systems, provided it is connected to the Lumishore LUX Strip Light Driver control module. The control module manages the input voltage for the LED strip.

How to install the Garmin LUX SL180 LED strip?

Installing the LUX SL180 light strip is typically done using its 3M adhesive mount. It is critical to thoroughly clean the mounting surface with IPA to ensure it is free of dust and dirt. After removing the adhesive’s protective layer, press the light strip firmly into place, applying pressure only to the edges and not the LEDs.

What precautions should be taken when handling the LED strip during installation?

During installation, carefully unroll the LED strip to avoid dropping or twisting it. Do not apply pressure to the LED area, only to the edges of the strip. For lengths over one meter, it is recommended to use two people for installation: one to install and the other to hold and unroll the strip.

Can the LUX SL180 light strip be bent to fit curved surfaces?

Yes, the LUX SL180 light strip can be bent, but only along the vertical axis, with a minimum bend radius of 50 mm. It is imperative not to bend it along the horizontal axis or twist it, as this could damage the product.

Is it recommended to use additional fastenings for outdoor installation or in wet areas?

Yes, for exterior installations, wet areas, or tight bends, it is strongly recommended to use mechanical fasteners in addition to the adhesive layer. These fasteners, such as mounting clips, should be spaced every 25 to 30 cm and/or on either side of a bend.

Where should the LUX SL180 light strip NOT be installed?

Although the LED strip is made from UV-resistant materials, it must not be installed in areas exposed to direct strong sunlight. Additionally, it is not designed to be permanently submerged in water, despite its IP68 certification.

Is professional assistance required for the electrical and mechanical installation of the LED strip?

Yes, it is strongly recommended that a qualified professional carry out the electrical and mechanical installation of the LUX SL180 LED strip. This ensures a correct and safe installation, compliant with standards.

How long should you wait after installation before turning on the LED strip?

After installing the LED strip using the 3M adhesive, it is recommended to let the adhesive set for 24 hours before turning on the LED strip. This ensures optimal and durable adhesion.

What conditions could void the warranty for the LUX SL180 LED strip?

The warranty for the LUX SL180 light strip may be voided in cases of misuse, abuse, incorrect installation, negligence, damage caused by disasters (fire, flood, lightning), installation by unqualified personnel, unauthorized repair or modification, or installations not approved by the manufacturer. Using third-party drivers not approved by Lumishore will also void the warranty.