Multiplexer for AIS/VHF/radio to send the VHF antenna signal to the radio

The Glomex GL-RA201 multiplexer is designed to optimize your marine installation by allowing a single VHF antenna to be connected to three separate devices: a VHF radio, an AIS receiver, and an AM/FM radio. This simplifies wiring and reduces the number of antennas required on board.

This multiplexer can handle several types of signals:

Radio reception from 100 kHz to 200 MHz, including GO/PO/OC/FM bands.Marine and amateur VHF transmission and reception from 100 MHz to 200 MHz.AIS reception from 100 MHz to 200 MHz.

Yes, the Glomex GL-RA201 is manufactured with an epoxy-metal anti-diffusion paint. This design provides high resistance to rust and oxidation, which is essential in a marine environment.

The Glomex GL-RA201 multiplexer operates on a 12V DC power supply (with an acceptable range of 10 to 16V DC) and its maximum power consumption is 25 mA.

The Glomex GL-RA201 multiplexer has very compact dimensions, making it easy to install in tight spaces. It measures 83 mm in length, 48 mm in width, and 38 mm in height.

Yes, the Glomex GL-RA201 multiplexer integrates a 15 dB preamplifier. This preamplifier is shared across two inputs to optimize signal reception.

The integrated 15 dB preamplifier compensates for signal losses that may occur, particularly when distributing the antenna signal to multiple devices. It ensures optimal performance and better reception quality for your equipment.

The Glomex GL-RA201 multiplexer is designed to support VHF transmission power ranging from a minimum of 0.2 watts to a maximum of 100 watts.

Yes, the device is protected by a 5x20 mm fast-blow fuse rated at 315 mA, ensuring electrical safety of the installation.

The Glomex GL-RA201 multiplexer is compatible with the following devices, allowing a single VHF antenna to be shared:

A marine or amateur VHF radio. An AIS receiver. An AM/FM radio.

For the VHF antenna connection, the multiplexer has an SO-239 jack. A 60 cm RG-58 C/U cable with a male PL-259 connector is provided for the output to the VHF radio.

For connection to the AIS receiver, the multiplexer is equipped with a 60 cm RG-58 C/U cable with a male BNC connector.

Yes, for connection to an AM/FM radio, the multiplexer includes a 60 cm RG-59 A/U cable with a male Motorola connector, making it compatible with most standard AM/FM radios used in marine or automotive environments.

The Glomex GL-RA201 multiplexer requires a 12V DC power supply. It is designed to operate stably with an input voltage between 10V DC and 16V DC.

Yes, the multiplexer is designed to be used with a standard marine VHF antenna. The antenna input is an SO-239 jack, a common connector for VHF antennas.

The VHF antenna must be connected to the coaxial input of the multiplexer, which is an SO-239 jack. You will need an antenna cable with a male PL-259 connector for this connection.

The Glomex GL-RA201 multiplexer comes with the following pre-assembled cables for connecting your devices:

A 60 cm RG-58 C/U cable with male PL-259 connector for the VHF radio. A 60 cm RG-59 A/U cable with male Motorola connector for the AM/FM radio. A 60 cm RG-58 C/U cable with male BNC connector for the AIS receiver.

The multiplexer requires a 12V DC power supply. It must be connected to a stable power source on your vessel, capable of providing a voltage between 10 and 16Vdc.

No, one of the main advantages of the Glomex GL-RA201 multiplexer is that it lets you use a single VHF antenna to simultaneously power your VHF radio, AIS receiver, and AM/FM radio. This reduces clutter and installation complexity when mounting multiple antennas on your vessel.

Yes, the multiplexer is designed to handle both transmission and reception of marine and amateur VHF signals. It covers a frequency range from 100 MHz to 200 MHz for these functions.