mounting bracket - YANMAR JH-CR

This mounting bracket is designed to allow installation of the Integrel E-Power (OEG) onboard generator directly on YANMAR JH-CR marine diesel engines. It converts excess propulsion engine power into electrical energy, which is then stored in a 48V battery bank, replacing traditional generators.

The Integrel E-Power system, enabled by this bracket, uses excess power from the main engine to generate electricity. It consists of an embedded generator (OEG), two intelligent controllers, a data display screen, and a smart switch, all managing energy production and distribution in an optimized way.

A simple E-Power system, integrated via this mount, can generate up to 9 kW of electrical power. For higher power requirements, more complex configurations can be implemented to increase this capacity.

The Integrel E-Power system offers several advantages, including low maintenance for the Onboard Electric Generator (OEG) and the mounting support. It uses the existing power of the propulsion engine, which can reduce the need for a separate generator, and it manages OEG performance to prevent engine overload.

No, the Integrel mounting bracket for YANMAR JH-CR is not a generator by itself. It is an essential component that allows installation of the Integrel E-Power (OEG) embedded generator on the engine, thus facilitating integration of the complete energy production system.

For a complete E-Power system, in addition to this mount and the onboard generator (OEG), you need two intelligent controllers, an Integrel E-Power display for data visualization (OEG, engine, batteries), and a smart switch for power and data transport.

The Integrel E-Power system is managed by two smart controllers configured to operate in harmony with the engine and the battery system. It controls the performance of the onboard generator (OEG) to ensure the engine is never overloaded, thereby optimizing efficiency and longevity of the entire system.

The mounting bracket itself is designed to be low-maintenance. The entire E-Power system, including the on-board generator (OEG) and mounting brackets, is characterized by its robustness and low-maintenance design.

No, this mounting bracket is specifically designed for YANMAR JH-CR marine diesel engines. It is not compatible with other Yanmar models or other brands.

No, this mounting bracket is specifically designed for integrating the Integrel E-Power (OEG) embedded generator. It is not guaranteed to be compatible or functional with generators from other brands due to the Integrel system’s mounting and integration specifications.

The Integrel E-Power system is designed to generate electrical energy stored in a 48V battery bank. For compatibility information with other voltages, consult the full technical documentation of the Integrel E-Power system.

No, this mounting bracket is a specific component for the YANMAR JH-CR engine for integrating the OEG Integrel E-Power. Other mounting brackets exist for other engine brands and models compatible with the Integrel E-Power system.

The Integrel mounting bracket attaches to the front of the Yanmar JH-CR engine. This position is optimized for the integration of the on-engine generator (OEG) and to minimize space usage.

After installing the Integrel mounting bracket on the Yanmar JH-CR engine, the axial length increase of the engine and gearbox is less than 150 mm.

The bracket is designed for direct integration and facilitates the replacement of traditional generators on YANMAR JH-CR engines. Although installation involves adding a component to the engine, it is optimized to integrate seamlessly with the existing system.

Yes, the entire Integrel E-Power system, once integrated with this bracket, is fully tested in-house by the manufacturer. These tests ensure that the system manages the performance of the on-board generator (OEG) and prevents engine overload.

Installing an energy production system on a marine engine is a complex task. Although the bracket is designed for integration, it is strongly recommended to use a qualified professional or to strictly follow the installation manual provided by Integrel to ensure a correct and secure installation.

The mounting bracket is the physical anchor point for the onboard generator (OEG). The smart switch in the Integrel E-Power system is responsible for transporting power and data to other components, including smart controllers and the display, ensuring communication and harmonious operation of the entire system.

The mounting bracket is a key part of the integration kit. The required fasteners for its installation are usually included with the bracket or part of the Integrel E-Power complete integration kit. It is recommended to consult the installation manual for the exact list of supplied components.

The product context does not specify the exact tools required. However, installing components on a marine engine generally requires standard mechanical tools (wrenches, sockets, screwdrivers) and potentially specific tools for alignment or torque tightening. The product’s installation manual will provide a detailed list of the required tools.