Haut-parleurs marins encastrables M3-650X-S-Gw-i

These flush-mount marine speakers are 6.5-inch (approx. 165 mm) coaxial models.

Yes, this product is designed to be water-resistant. However, it must not be submerged or exposed to high-pressure water jets.

The M3-650X-S-Gw-i speakers are fitted with a white 'Sport' type grille.

Yes, these marine speakers are equipped with integrated RGB LED lighting.

Yes, the LED function allows up to seven fixed colors by wiring the wires individually. For adjustable color control, an RGB lighting controller is required (sold separately).

These are flush-mount coaxial marine speakers.

To clean these speakers, use mild soap and rinse them only with fresh water.

Before installation, take the following precautions:

Turn off the audio system and disconnect the battery. Check for potential obstructions behind mounting surfaces before cutting or drilling. Do not install the product in an engine compartment or an area of extreme heat. Secure the product firmly to prevent damage or injury under extreme conditions.

Yes, installing these speakers requires appropriate tools and safety equipment. Installation by a professional is recommended to ensure correct and secure setup.

Recommendations for pilot holes for mounting screws are:

For fiberglass with a thickness of 0.125 inches (approx. 3.175 mm) or less: 7/64 inches (approx. 2.78 mm). For fiberglass with a thickness greater than 0.125 inches: 1/8 inch (approx. 3.175 mm).

Yes, the LED feature requires a separate 12V wiring run at each speaker location. Additionally, you must install an inline fast-blow fuse on the positive wire of the LED cable for each speaker.

For the M3-650 speakers, a 150 mA fast inline fuse is required on the positive wire of the LED cable to protect the LEDs and the speaker from excessive current.

Do not install this product in an engine compartment or any other area exposed to extreme heat.

Individual wires can be wired to provide up to seven fixed LED colors. For advanced and adjustable lighting control, an RGB lighting controller is required and sold separately.

The speakers are designed to integrate with most marine audio systems. However, it is recommended to check your amplifier or main unit specifications to ensure optimal compatibility in terms of power and impedance.

For adjustable and customizable control of RGB LED lighting, an RGB lighting controller is required. This accessory is sold separately.

It is mandatory to consult your local waterways authority to determine the specific regulations regarding the use of accent lighting or speakers on your vessel. Regulations may vary by region.

To fully exploit the potential of these marine speakers and achieve optimal sound quality, the use of an external amplifier is generally recommended. This ensures adequate power delivery and better audio performance.

Yes, the LED feature requires a separate 12V wiring run to each speaker location. However, it is critical to install a 150 mA fast-blow inline fuse on the positive LED wire for each speaker to protect the LEDs and speaker from excessive current.