Marine amplifier MV600/2i
Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.
Available in stock
Technical specifications
Technical specifications
| Amp Class | Class D |
| Speaker Channels | 2 |
| Audio Output Power Rms | 600 |
| Total power output (W) | 600 |
| Input voltage range | 12 V DC |
| IP rating | IPX2 |
| Product dimensions | 269 x 176 x 93 mm |
| Weight | 3.65 kg |
| Accessories Included | Mounting screw, Power connector, Allen keys (2.5 mm, 3 mm), Speaker output harnesses, USB A/B cable, Connection guide |
| Amp Technology | NexD2™ |
| Source type | Marine amplifier |
| Color | Gray |
| Cooling method | Passive (dissipation via housing) |
| Electrical System Type | 12 V DC |
| Grounding type | Negative ground |
| Installation environment | Dry and well-ventilated |
| Integrated Dsp | Yes |
| Mounting type | Area |
| Usb Cable Length | 1.8 |
| Ventilation Clearance | 2.5 |
| IP rating | IPX2 |
Detailed description
Detailed description
The JL Audio MV600/2i marine amplifier is a 2-channel, full-range, Class D amplifier integrating second-generation NexD2™ technology and an advanced digital signal processor (DSP). Designed for marine environments, it delivers high-fidelity audio amplification with high efficiency.
Audio performance and power
This amplifier delivers 180 watts RMS x 2 at 4 ohms or 300 watts RMS x 2 at 2 ohms at 14.4 V. In bridged mode, it reaches 600 watts RMS x 1 at 4 ohms. At 12.5 V, the power outputs are 140 watts RMS x 2 at 4 ohms, 225 watts RMS x 2 at 2 ohms, and 450 watts RMS x 1 bridged at 4 ohms. The frequency response extends from 12 Hz to 24 kHz (+0, -1 dB), with a signal-to-noise ratio of 99 dB (A-weighted) and THD+N below 1% at 2 ohms per channel. The damping factor is greater than 100 at 4 ohms and 50 Hz, and greater than 50 at 2 ohms and 50 Hz.
Integrated digital signal processing (DSP)
The MV600/2i features a 24-bit 96 kHz DSP (AKM AK7738) for complete audio configuration. All amplifier settings and DSP features are managed via JL Audio’s TüN™ software, available on PC, Mac, tablets, and smartphones, replacing traditional analog controls. DSP capabilities include input routing and mixing, adjustable gain controls with clipping indication, fully adjustable high-pass, low-pass, and band-pass filters (selectable slopes from 6 to 48 dB/octave), a 10-band equalizer (graphic or parametric), phase and polarity control, and time alignment in 0.02 ms (1/4") increments.
Marine design and connectivity
Housed in a compact die-cast alloy chassis, the amplifier features a corrosion-resistant marine-grade powder finish and connectors suitable for marine environments. It is rated IPX2 when mounted vertically with connections facing downward. The NexD2™ technology uses DirectFET™ outputs and a reduced-loop design for high efficiency and sound fidelity. It includes four balanced differential analog inputs (RCA) accepting signal levels up to 16 V RMS, ensuring effective noise rejection. High-level speaker inputs are also configurable via an adapter. Four processed analog preamp outputs (4 V RMS max) allow sharing DSP capabilities with other amplifiers. The JLid™ connectivity supports optional accessories such as the network hub, Bluetooth communicator (VXi-BTC), and digital remote control (DRC-205 with adapter). The amplifier includes an automatic power-on function triggered by DC offset or signal detection.
Your payment information and data are processed securely.
