VeX 1.125" Mounting Bracket for PS-SWMCP-B Bar

The JL Audio PS-SWMCP-B-1.125 is a swivel mounting bracket designed specifically to secure JL Audio VeX™ enclosed marine speaker systems to round bars with a diameter of 1.125 inches (approximately 2.86 cm). It enables secure installation and angle adjustment of the speaker.

This mounting bracket is compatible with all JL Audio VeX™ enclosed marine speaker systems. It is specifically designed for this product range.

This mount is designed to be installed on round bars with a diameter of 1.125 inches (approximately 2.86 cm).

Yes, the mounting hardware needed to install the bracket on the bar is included. This includes:

4 Axia Alloys hose clamps
6 M6 x 16 mm socket head screws
2 M4 x 4 mm set screws (pre-installed)
4 M6 nylon insert nuts
2 cable tie receivers
1 tube of Loctite® red thread locker
4 M6 flat washers
6 M6 x 45 mm socket head screws
1 protective plastic strip
Mounting bases, silicone adhesive, #8 flat washers, and #8 x 1-1/4" pan head screws are included with VeX™ speakers, not with this bracket.

Yes, it is recommended to apply the red Loctite® thread-locking compound provided on the M6 x 16 mm screws and on the central M6 x 16 mm screw of the collar receiver to ensure secure and durable fastening.

Yes, this is a swivel mount. You can rotate the speaker to the desired angle. To do this, you will need to loosen the speaker mounting screws, adjust the angle, then tighten them firmly.

This product is covered by a limited two (2) year warranty from the original purchase date, applicable to marine products in the United States. For purchases outside the United States, the warranty is managed by the local distributor of the relevant country.

No, the warranty is not transferable. It applies only to the original buyer from an authorized JL Audio dealer.

The warranty does not cover damage caused by:

An accident
Improper use or abuse
Modification or neglect of the product
Failure to follow installation instructions
Unauthorized repair attempts
False statements by the seller
It also does not cover indirect or consequential damages, or removal and reinstallation costs of the unit.

No, aesthetic damage caused by an accident or normal wear is not covered by the warranty.

Yes, this mounting bracket is manufactured in the United States by Axia Alloys.

This mount is specifically designed for round cross-section bars. It is not compatible with non-round or oval cross-section bars.

Yes, for Premium models, if you want to rotate the logo/grille badge of the speaker, you must clean the inside of the aluminum cap with acetone, apply a circular bead of silicone adhesive inside the cap, then align and press it onto the speaker. It is recommended to use masking tape to hold it in place until the silicone cures (at least 24 hours).

No, this is a mounting accessory sold separately from the VeX™ speakers. It is designed for use with the VeX™ sealed speaker systems.

Yes, all applicable implied warranties are limited in duration to the period of the express warranty, as provided, starting from the original retail purchase date.

This bracket is specifically designed and optimized for JL Audio VeX™ marine enclosed speaker systems. Using it with other brands or speaker models is not guaranteed and may not be compatible or safe.

Yes, detailed installation instructions are provided with the bracket to guide the user through the steps of mounting on the tiller and securing the enclosure.