VeX™ mounting bracket for enclosed speaker, 0.75" bar (PS-SWMCP-B-0.750)

This JL Audio mounting bracket is designed to secure VeX™ closed-box speaker systems to round bars. It allows for secure installation and adjustable orientation of your marine speakers.

The mounting bracket includes the following items:

4 Axia Alloys hose clamps
6 M6 x 16 mm socket head screws
2 M4 x 4 mm (pre-installed) adjustment screws
4 M6 Nylstop nuts
2 hose clamp receivers
1 tube of red Loctite® thread locker
4 M6 flat washers
6 M6 x 45 mm socket head screws
1 plastic strip
Note: The mounting base, silicone adhesive, #8 flat washers, and #8 x 1-1/4" socket head screws are included with VeX™ speakers and not with this mounting bracket.

Yes, this mounting bracket is manufactured in the United States by Axia Alloys.

This mounting bracket is specifically designed for installation on bars with a diameter of 0.75 inches (approximately 1.9 cm).

Yes, this mount is a swivel fixture designed for round pipes, allowing adjustment of the enclosure's angle after installation.

Yes, a Loctite® red thread-locking compound is included with the mounting bracket to ensure secure fastening of the screws.

No, the mounting screws for the speakers (such as #8 x 1-1/4" pan head screws) and flat washers #8 are not included with this mounting bracket. They are supplied with the VeX™ speakers themselves.

The plastic strip included is meant to be placed around the tiller before installing the hose clamps. It protects the tiller surface from scratches during assembly.

Yes, this mounting bracket is protected by US patents #8,136,771 and #8,398,035.

This mount is compatible with all JL Audio PS650-VeX™ sealed enclosure systems. Installation steps are identical for all these systems and all PS-SWMCP swivel mounts for round pipes.

Yes, this mount is specifically designed as a swivel fitting for round pipes. It is not suitable for bars of a different shape.

This bracket is specifically designed for JL Audio VeX™ sealed enclosure systems. While it may technically fit other speakers of similar size and configuration, optimal compatibility and warranty are guaranteed only with JL Audio VeX™ products.

Although not explicitly listed, the included screw types (M6 hex-head cap screws, M4 adjustment screws) suggest that Allen keys (hex wrenches) of corresponding sizes will be required for installation.

To avoid scratching the bar, you must place the supplied plastic strip around it before pushing the hose clamps into position.

Yes, it is recommended to apply Loctite® red thread-locking compound to the M6 x 16 mm screws before inserting and tightening them. When reassembling the enclosure mounting screws (if you removed the badge/logo), hand-tighten them in a criss-cross pattern for even pressure distribution.

Yes, it is mandatory to apply the Loctite® red thread-locking compound provided on certain M6 x 16 mm screws during installation to ensure the safety and stability of the assembly, especially in a marine environment subject to vibrations.

To adjust the speaker angle, you will need to loosen the mounting screws, rotate the speaker to the desired angle, then reinstall and tighten the screws and mounting washers in a star pattern.

JL Audio warrants this product against defects in materials and workmanship for a period of two (2) years from the original purchase date. This warranty is non-transferable and applies only to the original purchaser from an authorized JL Audio dealer.

The warranty does not cover damage caused by:

Accident, misuse, abuse, modification, or neglect of the product.
Failure to follow installation instructions.
Unauthorized repair attempts.
False statements by the seller.
Additionally, the warranty does not cover incidental or consequential damage, nor the costs of removal or reinstallation of the unit. Cosmetic damage due to accident or normal wear and tear is also not covered.