M6-10IB-S-GmTi-4 Marine Subwoofer

This subwoofer is specifically designed for demanding marine environments. It is water-resistant, allowing it to withstand spray and humidity. However, it must not be submerged or exposed to high-pressure water jets.

The JL Audio M6-10IB-S-GmTi-4 subwoofer is a 10-inch (approx. 25 cm) model, delivering powerful bass reproduction.

This subwoofer handles an RMS power of 250 watts and a peak power of 500 watts, ensuring clear and dynamic bass.

The JL Audio M6-10IB-S-GmTi-4 subwoofer has an impedance of 4 ohms.

Yes, this model is equipped with a titanium Sport grille, which provides both protection and an aesthetic design.

The designation provides key information about the product:

M6: Indicates the subwoofer series. 10IB: Means a 10-inch model designed for 'Infinite Baffle' installation. S-GmTi: Refers to a Sport-type grille with a Gunmetal Titanium (GmTi) finish. 4: Indicates an impedance of 4 ohms.

To clean your subwoofer, use mild soap and rinse it only with fresh water. Avoid high-pressure water jets.

Yes, installing this product requires appropriate tools and safety equipment. Professional installation is strongly recommended to ensure optimal performance and safety.

Before any installation, it is imperative to turn off the audio system and disconnect the battery from the audio system. Also check that there are no potential obstacles behind the mounting surfaces before cutting or drilling.

It is important not to install this subwoofer in an engine compartment or any other area exposed to extreme heat, as this could damage the product.

You must mount this product securely to prevent any risk of damage or injury in extreme conditions, such as in heavy swell.

For fiberglass with a thickness of 0.125 inch (approximately 3.175 mm) or less, use a 7/64 inch drill bit. For fiberglass thicker than 0.125 inch, use a 1/8 inch drill bit.

The LED feature requires a separate 12V wiring at each speaker location. Individual wires can be wired to achieve up to seven fixed LED colors. For adjustable LED lighting control, an RGB lighting controller is required and sold separately.

Yes, it is mandatory to install a fast-blow inline fuse on the positive wire, at the power source end of the LED cable for each speaker. This protects the LEDs and the speaker from excessive electrical current. The absence of a fuse can result in fire and damage.

A fast inline fuse is required to protect the LED lighting. The specific fuse rating (in milliamps) for the M6-10IB model must be checked in the installation documentation provided with the product to ensure adequate protection.

This subwoofer is designed to be integrated into a marine audio system compatible with a 4-ohm impedance and capable of delivering the required power (250W RMS). Ensure your amplifier can handle this impedance and power output.

Yes, a separate RGB LED lighting controller is required for adjustable and customizable RGB LED lighting control. This controller is sold separately and allows you to select from a range of colors and effects.

Yes, RGB LED lighting is an optional feature. The subwoofer will work perfectly for sound reproduction even if you choose not to connect or use the LED lighting function.

Yes, the 'IB' designation in the model name (M6-10IB) indicates it is specifically designed for an 'Infinite Baffle' installation, meaning it uses the air volume of the mounting compartment as the acoustic enclosure.