M6-10IB-S-GmTi-i-4 Marine Subwoofer

This is a 10-inch (250 mm) marine subwoofer designed by JL Audio to deliver powerful and clear low-frequency reproduction in open marine environments. It is part of the M6 series and features integrated RGB LED lighting and a titanium Sport grille.

This subwoofer has a 10-inch diameter, which is approximately 250 mm.

The M6-10IB-S-GmTi-i-4 marine subwoofer delivers 250 Watts RMS continuous power.

Yes, this product is water-resistant. However, it should not be submerged or exposed to high-pressure water jets.

This subwoofer is fitted with a titanium-look Sport grille.

Yes, this subwoofer has integrated RGB LED lighting.

To clean this subwoofer, use a mild soap and rinse it only with fresh water.

Yes, professional installation is recommended for this subwoofer. This ensures proper and secure setup, requiring appropriate tools and safety equipment.

Before installation, it is essential to turn off the audio system and disconnect the battery. Additionally, before cutting or drilling, check for any potential obstacles behind the mounting surfaces.

It is important not to install this product in an engine compartment or any other area exposed to extreme heat.

This product must be securely mounted. Proper installation is critical to prevent damage or injury, especially in extreme marine conditions.

The LED feature requires a separate 12 V wiring harness for each speaker. Individual wires can be wired to achieve up to seven fixed LED colors.

Yes, a separate RGB lighting controller is required for adjustable and customizable control of LED lighting colors and effects. This accessory is sold separately.

Yes, you must install a fast-blow inline fuse on the positive wire, on the power source side of the LED cable for each speaker. This measure is crucial to protect the LEDs and the speaker from excessive electrical current and prevent fire hazards.

Installing this subwoofer requires appropriate tools and safety equipment. It is recommended to have a professional perform this task.

Yes, it is important to check local regulations regarding the use of accent lighting or speakers on your boat with the waterway authorities.

This subwoofer is designed to operate in open marine environments. It is compatible with marine audio systems that can provide 250 Watts RMS power. For RGB LED lighting control, an RGB lighting controller (sold separately) is required.

The subwoofer features built-in RGB LED lighting. However, for adjustable color and effect control, an external RGB lighting controller is required and sold separately. Without an external controller, the wires can be wired to achieve up to seven fixed colors.

Yes, this subwoofer is specifically designed for open marine environments, making it perfectly suited for outdoor use on a boat and resistant to marine conditions.

The primary function of a marine subwoofer like the M6-10IB-S-GmTi-i-4 is to reproduce low frequencies. It adds depth, impact, and better definition to your audio system's sound, enhancing the listening experience on the water.