[JL AUDIO] Subwoofer marin M6-8TIB-L-GwSw-8 - round white Luxe grille

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Save 10%

JL Audio

010-03875-00

JL Audio M6-8TIB-L-GwSw-8 Marine Subwoofer Enclosure

8-inch marine subwoofer JL Audio M6-8TIB-L-GwSw-8 designed for powerful bass in marine environments. Its DMA-optimized design and infinite baffle operation ensure deep and clear sound reproduction. Features RGB Transflective™ LED lighting for customizable ambiance.

Retail priceBenefit from the professional rate

597,73€

597,73€ ~~666,66€~~

Shipping calculated at checkout.

Prices shown excluding VAT for Türkiye. If your delivery address is in the European Union, the VAT of the destination country will be added at checkout.

Available in stock

Free pickup point from €150 in France
Pickup at Skysat possible

Custom installation

Trust Skysat to install the equipment on board

Request a quote

Installers near you

thanks to our network of approved installers

Find an installer

Support service

Opt for additional installation assistance

Technical specifications

Source type	Subwoofer
Speaker Diameter In	8
Audio Output Power Rms	250
IP rating	IPX5
Color	White
Compass safe distance	Not specified (refer to product specifications)
Continuous Power Handling Rms	200
Enclosure Type	Infinite baffle
Impedance	8
Max Mounting Panel Thickness	Not specified (refer to product specifications)
Max Recommended Wire Length 4ohm 12awg	10.5
Max Recommended Wire Length 4ohm 16awg	4
Max Recommended Wire Length 8ohm 12awg	21
Max Recommended Wire Length 8ohm 16awg	8.5
Min Mounting Panel Thickness	Not specified (refer to product specifications)
Mounting Depth	96.5
Mounting Screw Torque	1.69
Mounting Screw Type	Phillips #2
Mounting type	Flush-mounted
Recommended Amplifier Power Range Rms	50-200
Recommended Sealant Type	3M™ 4200 or 5200
Recommended Spade Connector Size	4.8 and 6.3
Recommended Wire Gauge Ofc	16 AWG (1.3-1.5 mm²)
Recommended Wire Gauge Ofc 4ohm Long Run	12 (3-4 mm²)
Recommended Wire Gauge Ofc 4ohm Short Run	16 (1.3-1.5 mm²)
Recommended Wire Gauge Ofc 8ohm Long Run	12 (3-4 mm²)
Sensitivity Db 1w 1m	86.8
Speaker Diameter Mm	200
Wire Material Restriction	Copper-clad aluminium (CCA)

Detailed description

Designed for immersive sound in marine environments, the JL Audio M6-8TIB-L-GwSw-8 subwoofer is an 8-inch (200 mm) woofer from the M6 series. It is optimized to deliver precise and powerful bass reproduction, even in demanding nautical conditions.

Acoustic Performance and Robust Design

This marine subwoofer handles a continuous power of 200 Watts RMS, with a recommended amplifier power between 50 and 200 Watts RMS, and features a nominal impedance of 4 Ohms. Its sensitivity of 86.8 dB (1W/1m) ensures acoustic efficiency. The design is optimized by DMA (Dynamic Motor Analysis), allowing a linear excursion of 14 mm (Xmax) for deep bass with reduced distortion and improved transient response. The cone is made of injection-molded polypropylene filled with mica, completed by a foam surround, ensuring durability and performance.

Flexible Installation and Marine Durability

The JL Audio M6-8TIB-L-GwSw-8 is primarily designed for infinite baffle operation, using a large volume of air behind it (minimum 42.5 L), eliminating the need for a dedicated enclosure. For custom installations, it can be integrated into a sealed enclosure (recommended internal net volume of 56.66 L) or vented (recommended internal net volume of 42.5 L). With a mounting depth of 127 mm and a cutout diameter of 187 mm, it fits into various configurations. Its construction meets marine standards, resisting salt spray and UV exposure, and the front face features IPX5 protection against low-pressure water jets. All M6 speakers are manufactured at JL Audio’s factory in Miramar, Florida.

Aesthetics and Visual Integration

This subwoofer features a "Luxe" style with a discreet mounting ring and a fine-mesh grille, offering a refined appearance and minimal protrusion of 37 mm. It integrates a patented JL Audio Transflective™ RGB LED lighting system, which projects soft, uniform illumination through the woofer cone, providing multiple color options. An optional RGB controller (sold separately) is required to adjust the lighting. The grille and trim ring are removable, allowing custom painting to match the boat’s aesthetics.

Documentation

Type	Nom
	Notice d'installation - Instructions d'installation du subwoofer marin JL Audio M6-8TIB Luxe (EN)

Expert opinion

« Marine subwoofer JL Audio M6-8TIB-L-GwSw-8: integration and acoustic performance »

The JL Audio M6-8TIB-L-GwSw-8 marine subwoofer is a strategic solution for enhancing a nautical audio system, delivering essential bass depth without requiring a bulky speaker enclosure. Its infinite baffle design, optimized for a large air volume, makes it particularly suitable for boats where space is limited, enabling discreet and efficient installation.

From an installation standpoint, this model offers notable flexibility. While it can be mounted in a dedicated enclosure, its key advantage lies in its ability to perform optimally in an infinite baffle configuration, simplifying mechanical integration. During installation, it is critical to ensure the rear of the speaker is protected from moisture exposure, as it is not waterproof. The safe distance from a compass (235 cm) must also be strictly observed to prevent magnetic interference.

This subwoofer stands out for its marine-grade construction and manufacturing at JL Audio’s Florida facility, a guarantee of quality and compliance with marine industry standards. The integration of the RGB Transflective™ LED lighting adds both aesthetic and functional value, allowing for customizable onboard ambiance—a significant advantage for design-conscious owners. It is a relevant choice for those seeking uncompromising acoustic performance, marine-grade durability, and a modern aesthetic touch.

Durabilité

Facilité d'installation

Rapport performance / prix

Payment and security

Your payment information and data are processed securely.

JL Audio M6-8TIB-L-GwSw-8 Marine Subwoofer Enclosure

597,73€

597,73€ ~~666,66€~~

Frequently Asked Questions

Need help? Contact us

What is the RMS power of this JL Audio M6-8TIB-L-GwSw-8 subwoofer?

The JL Audio M6-8TIB-L-GwSw-8 subwoofer has an RMS power output of 250 Watts.

What is the nominal impedance of this marine subwoofer?

The nominal impedance of this subwoofer is 8 Ohms.

What is the sensitivity (efficiency) of this subwoofer?

The sensitivity of this subwoofer is 83.2 dB (1W/1m).

What are the physical dimensions of the JL Audio M6-8TIB-L-GwSw-8 subwoofer?

The outer diameter (round grille) is 254 mm (10 inches).The mounting depth is 96.5 mm (3.8 inches).The required cutout diameter for installation is 228.6 mm (8.96 inches).

Is this subwoofer waterproof and suitable for a marine environment?

Yes, the front face of this subwoofer is protected against low-pressure water jets (IPX5 rating per IEC 60529 standard), making it suitable for marine use. However, the rear of the speaker and all connections are not waterproof and must be protected from moisture.

What is the net weight of this marine subwoofer?

The net weight of the JL Audio M6-8TIB-L-GwSw-8 subwoofer is 3.4 kg (7.5 lb).

What type of grille is included with this subwoofer?

This subwoofer is supplied with a white Luxe round grille.

What type of enclosure is recommended for this JL Audio M6-8TIB-L-GwSw-8 subwoofer?

This subwoofer is primarily designed to operate in 'infinite-baffle' mode, meaning without a dedicated enclosure, by using a large volume of air behind it. For optimal performance, the compartment or area behind the mounting location must remain empty. If you choose to build a dedicated enclosure, specifications for sealed or ported enclosures are available in the technical documentation.

What panel thicknesses are acceptable for mounting this subwoofer?

The mounting panel thickness must be between 6 mm (0.25 in) and 41 mm (1.625 in).

What tools are required to install this marine subwoofer?

A saw or appropriate cutting tool for the surface material.A marine sealant (e.g., 3M™ 4200 or 5200).Female spade connectors sized 4.8 mm and 6.3 mm.A torque screwdriver with Phillips head and a #2 Phillips screwdriver.A drill and drill bits.A wire cutter, wire stripper, and crimping tool.Speaker cable (see gauge recommendations).

What is the safe distance from a magnetic compass for this subwoofer?

To avoid interference with a magnetic compass, you must not mount the speakers within 235 cm (93 inches) of the compass.

How to properly clean a marine subwoofer?

To clean the subwoofer, use a damp cloth soaked in fresh water to remove residue. For heavy buildup or stains, a mild detergent may be used. Never use harsh cleaners or solvent-based products, and avoid high-pressure water sprays.

What polarity must be respected when wiring the cables during installation?

It is crucial to respect cable polarity when connecting. Wires must be connected from positive to positive and from negative to negative, between the source (amplifier) and the speakers.

What speaker cable gauge is recommended for this subwoofer?

Use oxygen-free copper (OFC) speaker cable of 16 AWG (1.3 to 1.5 mm²). For longer distances, you may need a larger gauge:

For an 8 Ohm load (1 speaker): 16 AWG up to 8.5 m, 12 AWG (3 to 4 mm²) from 8.5 m to 21 m.
For a 4 Ohm load (2 speakers in parallel): 16 AWG up to 4 m, 12 AWG (3 to 4 mm²) from 4 m to 10.5 m.
Do not use copper-clad aluminum (CCA) cable.

What amplifier power is recommended for this subwoofer?

The recommended amplifier power for this subwoofer is between 50 and 250 Watts RMS.

What conditions can void the warranty for this subwoofer?

The warranty may be void if the rear of the speaker is exposed to moisture or water. This includes situations where speakers are mounted in a sealed enclosure but exposed to washing, or if the enclosure has a vent or port exposed to the external environment allowing water to accumulate and damage the speaker. Using power tools to fully tighten mounting screws may also permanently damage the speaker and void the warranty. The use of harsh or solvent-based cleaners may also void the warranty.

Is the warranty affected if the subwoofer is mounted horizontally facing upward?

Yes, if the subwoofer is mounted on a horizontal surface facing upward, water can accumulate in and around the speaker, causing damage over time. Exposure to water and damage to the rear of the speaker voids the warranty. It is recommended to mount it on a vertical surface.

Is this product supplied with all necessary installation components?

The product is supplied with the mounting template. Additional tools and materials such as marine sealant, connectors, speaker cables, and cutting/tightening tools must be provided by the installer.