VeX™ mounting bracket for enclosed speaker, 1.75" bar (PS-SWMCP-B-1.750)

This bracket is a mounting fixture designed for JL Audio VeX™ marine enclosure systems. It allows you to secure these enclosures to a 1.75-inch diameter bar, providing a secure installation and the ability to angle the enclosures.

This is a swivel mount. It allows you to adjust the angle of your VeX™ speakers after installation for better sound projection.

This mount is specifically designed to be installed on bars with a 1.75-inch diameter.

No, this product is only a mounting bracket. VeX™ sealed speaker systems are sold separately.

This mount is manufactured by JL Audio, a brand specializing in marine audio systems.

This mount is compatible with JL Audio VeX™ closed marine speaker systems.

This bracket is specifically designed for JL Audio VeX™ sealed enclosure systems. Use with speakers from other brands is not guaranteed and may not be suitable.

The PS-SWMCP-B-1.750 model is designed for bars with a 1.75-inch diameter. Other JL Audio mounting bracket variants may exist for different diameters, but this specific model is limited to 1.75 inches.

The mounting kit includes the following parts for an enclosure:

2 mounting brackets
2 M6 x 20 mm adjustment screws
6 #10 x 1" Phillips flat-head sheet metal screws
6 M6 split lock washers
6 M6 x 16 mm socket head cap screws
2 mounting bases
Loctite® Red thread locking compound
Note: Silicone adhesive, mounting bases, #8 flat washers, and #8 x 1-1/4" screws are included with VeX™ enclosures and not with this bracket alone.

A Loctite® Red thread-locking compound is included to secure certain screws during installation.

Yes, a silicone adhesive is required for certain installation steps, particularly for securing the aluminum logo cap. However, this silicone adhesive is included with the VeX™ speakers and not with this mounting bracket alone.

To adjust the angle, loosen the M6 x 20 mm adjustment screw, rotate the housing to the desired angle, then retighten the adjustment screw to secure it. If you need to realign the logo badge, remove the housing mounting screws, rotate the housing, then reinstall the screws.

The product is shipped with detailed installation instructions to guide you through the assembly steps.

Loctite® Red thread locking compound is specifically mentioned for application on M6 x 16 mm cheesehead screws when securing the mounting base.

The document mentions the use of Phillips screws and hex socket head cap screws, which requires a Phillips screwdriver and an Allen key (not included). Acetone is also needed to clean the logo cap but is not supplied.

JL Audio guarantees this product against defects in materials and workmanship for a period of two (2) years from the original purchase date.

No, this warranty is not transferable and applies only to the original buyer from an authorized JL Audio dealer.

The warranty covers manufacturing defects or malfunctions. JL Audio will repair or replace the defective product (at its discretion) free of charge.

Damage caused by the following is not covered by the warranty:

Accident, misuse, abuse, modification or neglect of the product.
Failure to follow installation instructions.
Unauthorized repair attempts.
False statements by the seller.
Indirect or consequential damage.
Cost of removal or reinstallation of the unit.
Aesthetic damage due to an accident or normal wear.