VeX™ mounting bracket for enclosed speaker, 1.85" bar (PS-SWMCP-B-1.850)

This is a swivel mounting bracket designed by JL Audio for JL Audio VeX™ marine sealed speaker systems. It allows these speakers to be mounted on round bars of a specific diameter, providing adjustable orientation for optimal sound experience.

This mount is specifically designed for installation on round bars with a diameter of 1.85 inches.

Yes, the technical document clearly states it is "PS-SWMCP swivel fixtures for round pipes", confirming the bracket is swivel-mounted and allows the enclosure to be oriented to the desired angle.

Yes, the technical document specifies that the mounting bracket is "made in the USA by Axia Alloys".

This bracket is specifically designed for JL Audio VeX™ closed marine speaker systems (e.g., PS650-VeX closed speaker systems).

This bracket is designed and optimized for JL Audio VeX™ enclosed speaker systems. Use with speakers from other brands is not guaranteed and may not be compatible due to unique mounting specifications.

No, this mount is specifically designed to be installed on round bars with a diameter of 1.85 inches. It is essential to check your bar diameter before purchase to ensure compatibility.

The installation manual requires the use of Allen keys (hex keys) for countersunk screws and adjustment screws. Acetone (not included) and masking tape (not included) are also recommended for certain steps, particularly cleaning the logo cap and holding it in place while the adhesive dries.

The mount is supplied with the following hardware:

4 Axia Alloys clamps
6 M6 x 16 mm countersunk screws
2 M4 x 4 mm adjustment screws (pre-installed)
4 M6 locking nuts with nylon insert
2 clamp receivers
Loctite® red thread locking compound
4 M6 flat washers
6 M6 x 45 mm countersunk screws
1 protective plastic strip
Components such as the mounting base, silicone adhesive, #8 flat washers, and #8 x 1-1/4" pan head screws are specifically included with VeX™ speakers and are not part of the standard contents of this mount alone.

Yes, the installation manual specifies applying the supplied Loctite® red thread-locking compound on certain M6 x 16 mm and M6 x 45 mm screws to ensure secure and durable fastening.

A plastic strip is provided to be placed around the mast, where clamps can be pushed. This strip helps prevent scratches and protects the surface of your mast.

Yes, the bracket is swivel-mounted. The instructions state to "swivel the enclosure to the desired angle" before tightening the mounting screws. It is also possible to rotate the badge/logo on the grille for perfect alignment.

Yes, it is recommended to clean the inside of the aluminum logo cap with acetone (not included), then apply a circular bead of silicone adhesive (included with VeX™ speakers) inside the cap, about 13 mm from the outer edge, before pressing it onto the back of the speaker.

It is recommended to apply masking tape (not included) to hold the cap in place until the silicone cures, which takes at least 24 hours.

JL Audio warrants this product against defects in materials and workmanship for a period of two (2) years from the original purchase date.

No, the warranty is not transferable and applies only to the original buyer who purchased the product from an authorized JL Audio dealer.

The warranty does not cover damage caused by:

An accident, misuse, or abuse.
Modification or neglect of the product.
Failure to follow installation instructions.
Unauthorized repair attempts.
False statements by the seller.
It also does not cover cosmetic damage from an accident or normal wear, nor consequential or incidental damage. Removal or reinstallation costs are also not covered.

Products purchased outside the United States of America are covered only by the distributor in the relevant country and not by JL Audio, Inc.