Mounting bracket for Skimmer 50/200 transducer

The Lowrance 50/200 Skimmer MOUNT (part number 000-10392-001) is a mounting kit specifically designed for Skimmer 50/200 kHz transducers. It allows secure installation of your transducer on the transom of your boat.

This mounting bracket is made from durable plastic, designed to withstand marine conditions and ensure the longevity of your depth sounder installation.

The weight of this mounting bracket is approximately 0.227 kg.

The primary function of this mount is to ensure secure attachment of the transducer to the boat's transom. It also helps protect the transducer from accidental impacts, especially during navigation.

The product reference (SKU) for this mounting bracket is 000-10392-001.

No, the Lowrance 50/200 Skimmer MOUNT is a mounting kit only. The 50/200 kHz Skimmer transducer is not included and must be purchased separately.

Yes, the 50/200 Skimmer MOUNT bracket is an original accessory from the Lowrance brand, designed to integrate perfectly with their Skimmer 50/200 kHz transducers.

This mount is specifically designed to be compatible with Lowrance Skimmer transducers operating at 50/200 kHz frequencies.

No, this mount is specifically designed for Skimmer 50/200 kHz transducers. For transducers with other frequencies, we recommend checking their compatibility with dedicated mounts.

This mount is designed for Lowrance Skimmer 50/200 kHz transducers. While there may be similarities, compatibility with transducers from other brands is not guaranteed and is not recommended by the manufacturer.

Yes, this mounting kit is compatible with various hull types. Guidelines for pilot holes are provided to suit soft materials (plywood) and rigid materials (fiberglass, acrylic, hardwoods).

The ideal mounting location for this bracket is on the transom, in an area where water flow is undisturbed, to ensure optimal performance of the transducer.

Recommended hole diameters for fairleads vary depending on hull material:

For flexible materials (such as plywood): Ø 3.7–4.0 mm (5/32") For rigid materials (such as fiberglass, acrylic, or hardwood): Ø 4.1–4.7 mm (3/16")

Yes, it is strongly recommended to apply a high-quality marine sealant on fastener holes. The sealant must be suitable for use above or below the waterline to ensure the installation remains watertight.

Yes, it is not recommended to mount the bracket behind a chine or near flaps (trim tabs), as these areas can create turbulence and disrupt water flow, thereby affecting the depth sounder's performance.

Installation guidelines specify using #10 screws (10# screw) for mounting the bracket.

The Lowrance 50/200 Skimmer MOUNT mounting kit is described as including the necessary components for secure installation. However, the available information does not explicitly specify whether the hardware (10mm screws) is included or must be purchased separately.

For optimal installation, choose a location on the transom with an undisturbed water flow, use the recommended hole diameters for your hull material, and apply a high-quality marine sealant around all mounting holes.

No, the Lowrance 50/200 Skimmer MOUNT bracket is specifically designed for mounting on the transom of the vessel. Through-hull mounting options exist for certain types of transducers, but not for this bracket.

No, this mount is exclusively designed for installation on the transom. Mounting options on the bow thruster are available for other types of transducers or specific mounts, but not for the Lowrance 50/200 Skimmer MOUNT.